THS4051CD - 70MHz High-Speed Voltage-Feedback Amplifier | Texas Instruments
부품 번호: THS4051CD ✓ 활성THS4051CD 개요
A high-speed voltage-feedback amplifier is an operational amplifier optimized for closed-loop signal amplification at high frequencies. It belongs to the broader hierarchy of analog amplifiers, analog integrated circuits, and semiconductor signal-conditioning components. Unlike a general-purpose precision amplifier, the THS4051CD prioritizes bandwidth, slew rate, and settling behavior for waveform, pulse, video, and communications signals.
The THS4051CD provides 70 MHz bandwidth and a 240 V/us slew rate, making it suitable for signals with significant high-frequency content. Its 60 ns settling time to 0.1% supports accurate measurement and processing of transient waveforms. The manufacturer identifies the device as stable at all gains for both inverting and non-inverting configurations, allowing the same amplifier topology to be used across a broad range of closed-loop gains from 0 to 70.
The device operates from ±4.5 V to ±16 V according to the product information, supporting both positive and negative supply configurations for bipolar signal paths. Its single-channel architecture makes it appropriate for designs where one high-speed amplifier is required in an instrumentation front end, communications interface, imaging system, or video processing block. The SOIC-8 package also provides a familiar surface-mount form factor for conventional PCB assembly.
Typical uses include video signal conditioning, communications equipment, imaging systems, test and measurement instruments, and general-purpose high-speed analog signal chains. When using the device, verify the required supply voltages, input and output signal swing, gain, feedback network values, and stability margins for the intended operating frequency. High-speed feedback layouts should minimize parasitic capacitance and maintain short, controlled feedback paths.
This product page combines the manufacturer’s published THS4051 specifications with practical guidance for high-speed PCB design, gain selection, signal-path layout, and drop-in replacement evaluation. It helps engineers distinguish the THS4051CD from other THS4051 package and ordering variants before integrating it into an existing eight-pin amplifier footprint.
드롭인 대체품: THS4051CD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
THS4051IDR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
THS4051CD 최대 정격 & 전기적 특성
| Amplifier Type | Single-channel voltage-feedback high-speed amplifier |
| Number of Channels | 1 channel |
| Gain-Bandwidth Product | 70 MHz |
| Slew Rate | 240 V/us |
| Settling Time | 60 ns to 0.1% |
| Stable Gain Range | 0 to 70 |
| Supply Voltage Range | +/-4.5 V to +/-16 V |
| 패키지 | 8-pin SOIC (D) |
| 실장 유형 | Surface mount |
| Feedback Configuration | Voltage feedback |
| Inverting Configuration | Supported |
| Non-Inverting Configuration | Supported |
THS4051CD 8-pin soic (d) 핀 구성 가이드
THS4051CD(8-pin soic (d) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: THS4051CD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
THS4051CD 적합 용도: 6 애플리케이션s: Video Signal Conditioning, Communications Receiver Front End, Imaging System Signal Path, Test and Measurement Instrumentation, Communications Interface Buffering, Pulse and Transient Signal Conditioning.
Video Signal Conditioning
The THS4051CD fits video signal-conditioning blocks because its 70 MHz bandwidth and 240 V/us slew rate provide the bandwidth needed for rapid video transitions. The single-channel amplifier can be placed around a source, receiver, or intermediate video node to preserve edge amplitude and reduce slew-related distortion. Use it where the signal is compatible with the specified ±4.5 V to ±16 V supply arrangement, and confirm the required video bandwidth, output swing, and gain against the target standard.
추천
Communications Receiver Front End
The THS4051CD is suitable for communications receiver signal paths that require a wide-band voltage-feedback amplifier. Its 70 MHz bandwidth supports high-frequency analog sections, while the 240 V/us slew rate helps preserve the amplitude of fast transitions and the 60 ns settling time supports controlled recovery after a transient. The exact gain, noise, distortion, and common-mode performance must be checked in the receiver architecture, with short feedback routing and local bypass capacitors used to preserve high-speed behavior.
추천
Imaging System Signal Path
The THS4051CD can amplify signals in imaging systems where detector outputs, analog gain stages, or imaging-chain interfaces require fast settling and broad bandwidth. The 70 MHz bandwidth and 240 V/us slew rate help maintain signal amplitude through fast transitions, while the single-channel format matches isolated analog amplification stages. Designers should calculate the required noise gain, output swing, and settling window, and should use the device’s 8-pin SOIC footprint in a layout optimized for short feedback paths and clean return connections.
추천
Test and Measurement Instrumentation
The THS4051CD is applicable to instrumentation front ends that amplify fast sensor, probe, or pulsed signals before digitization. Its 60 ns settling time to 0.1% can help the analog stage recover between measurements, and its 240 V/us slew rate supports rapid waveform reproduction. Actual measurement accuracy will also depend on input offset, bias current, noise, distortion, and ADC requirements. Confirm those parameters in the complete signal chain before using the amplifier as a precision measurement element.
추천
Communications Interface Buffering
The THS4051CD can serve as a high-speed buffer or gain stage between communications circuitry and a downstream converter or mixed-signal device. Its stable operation from gain 0 to 70 supports multiple closed-loop configurations, while the 70 MHz bandwidth gives designers room for signal conditioning above lower-frequency general-purpose amplifiers. Validate the output load, input common-mode range, supply rails, and stability with the exact receiver or driver used in production. Feedback components should follow the recommended values for the selected gain.
추천
Pulse and Transient Signal Conditioning
The THS4051CD is suited to conditioning pulse and transient signals because its 240 V/us slew rate reduces the tendency to slow fast edges and its 60 ns settling time defines a useful recovery target after a transition. The amplifier can be used in inverting or non-inverting gain configurations, including gain 0 operation. For reliable results, verify input and output headroom, select appropriate termination, keep feedback paths short, and ensure the pulse bandwidth and loading remain within the amplifier’s operating conditions.
추천
추천 제품 요약
엔지니어링 참조 데이터: THS4051CD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | THS4051IDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC (D) | SOIC-8 (D) - verify ordering suffix |
| Amplifier Type | Single-channel voltage-feedback high-speed amplifier | Single-channel THS4051-family voltage-feedback amplifier |
| Bandwidth | 70 MHz | 70 MHz family specification |
| Slew Rate | 240 V/us | 240 V/us family specification |
| Settling Time | 60 ns to 0.1% | 60 ns to 0.1% family specification |
| Supply Voltage Range | +/-4.5 V to +/-16 V | +/-4.5 V to +/-16 V family specification; confirm suffix |
| Stable Gain Range | 0 to 70 | 0 to 70 family specification |
주요 차별점
- High-speed performance for instrumentation and signal conditioning (vs THS4051IDR)
- Single-channel eight-pin implementation (vs THS4051IDR)
- Gain flexibility for signal-chain design (vs THS4051IDR)
설계 노트
Use a compact high-speed layout with the THS4051CD, feedback resistors, and input/output components located close to the device pins. Keep the feedback loop short, use direct ground returns, and avoid routing sensitive input or feedback nets beneath switching or digital activity. The 70 MHz bandwidth and 240 V/us slew rate make parasitic capacitance and inductance more consequential than in a low-frequency op-amp layout.
Do not select a replacement solely from bandwidth or slew rate. Verify the complete pinout, supply range, input common-mode behavior, output swing, stability, temperature grade, and package dimensions. The THS4051IDR is a same-family candidate identified in the cross-reference results, but its exact ordering configuration must be confirmed in the manufacturer documentation before it is treated as a production drop-in replacement.
Confirm the positive and negative supply rails, local bypass placement, and the maximum signal swing before powering the amplifier. The THS4051CD is specified for ±4.5 V to ±16 V supplies, and the usable output range is also limited by those rails. Start with the manufacturer’s recommended bypass and feedback arrangements, then validate stability and transient response with the actual source and load impedance.
규정 준수 정보
The verified manufacturer and distributor snippets confirm the THS4051CD identity, 70 MHz bandwidth, 240 V/us slew rate, 60 ns settling time, supply range, and package, but do not explicitly state compliance status.