TJA1055T/3/CM - 125 kBd Fault-Tolerant CAN | NXP
부품 번호: TJA1055T/3/CM ✓ 활성TJA1055T/3/CM 개요
A CAN transceiver is the physical-layer interface between a CAN protocol controller and the differential CAN bus. The TJA1055T/3 family combines transmit and receive functions, bus-fault detection, and fault-tolerant behavior in one interface IC. This hierarchy connects the device to CAN controllers, vehicle networking systems, industrial communication equipment, and embedded electronic control units.
Key features include differential receive and transmit capability, fault-tolerant operation, a maximum bus speed of 125 kBd, and low-power sleep and standby modes. The 5 V to 28 V supply range accommodates conventional automotive battery systems, while the AEC-Q100 designation identifies suitability for automotive qualification requirements. Its 14-pin SOIC format supports conventional surface-mount assembly and compact controller-area-network routing.
The transceiver is intended for low-speed CAN communication and provides the electrical interface between digital controller logic and the physical bus. Differential signaling improves signal integrity and common-mode rejection on the CANH and CANL conductors. Fault-tolerant circuitry is intended to maintain communication when bus faults occur, although system behavior still depends on termination, wiring, grounding, and the selected network topology.
Typical applications include passenger-car body and comfort electronics, automotive control modules, low-speed diagnostic equipment, industrial CAN controllers, and embedded systems that connect a CAN controller to a two-wire bus. The sleep and standby functions are particularly useful where modules must reduce current consumption while retaining controlled bus connectivity.
Place the transceiver close to the bus connector and CAN controller, route CANH and CANL as a tightly coupled differential pair, and provide the termination required by the network. Keep the ground reference and power-return routing consistent with the bus structure to minimize common-mode effects. Confirm device pin assignments in the NXP datasheet before assigning connector, controller, and supply connections.
This product page combines the TJA1055T/3/CM technical identity with verified package, speed, supply, mode, and automotive information. It also provides application guidance, drop-in comparison candidates, and practical PCB considerations to support faster component selection and implementation.
드롭인 대체품: TJA1055T/3/CM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TJA1055T/3/CM (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Primary Application, Fault Tolerance, Receive Capability.
TJA1054AT
✅ 드롭인가격 문의
데이터시트 보기 →TJA1054AT
✅ 드롭인가격 문의
데이터시트 보기 →TJA1055T/3/1
✅ 드롭인가격 문의
데이터시트 보기 →TJA1055T/3/1J
✅ 드롭인가격 문의
데이터시트 보기 →TJA1055T/3/C-T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TJA1055T/3/CM 사양
| Product Type | Enhanced fault-tolerant CAN transceiver |
| Maximum Data Rate | 125 kBd |
| Supply Voltage Range | 5 V to 28 V |
| Supported Vehicle Supply Levels | 9 V, 12 V, 15 V, 18 V, and 24 V |
| Power Modes | Sleep and standby |
| Bus Interface | Differential CANH and CANL |
| Transmit Capability | Differential CAN transmit |
| Receive Capability | Differential CAN receive |
| Fault Tolerance | Enhanced fault-tolerant operation |
| Primary Application | Low-speed passenger-car CAN communication |
| 패키지 | 14-pin SOIC |
| Shipping Package | Tape and reel |
| Automotive Qualification | AEC-Q100 |
| Pin-to-Pin Compatibility | Compatible with TJA1054 and TJA1054A |
TJA1055T/3/CM tape and reel 핀 구성 가이드
TJA1055T/3/CM(tape and reel 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: TJA1055T/3/CM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TJA1055T/3/CM 적합 용도: 6 애플리케이션s: Automotive Body Control Modules, Vehicle Comfort and Convenience Systems, Low-Speed Automotive Diagnostics, Industrial CAN Control Equipment, Embedded CAN Sensor Gateways, Automotive Infotainment Communication.
Automotive Body Control Modules
The TJA1055T/3/CM suits body and comfort-control modules that communicate over a low-speed CAN bus at up to 125 kBd. Its differential transceiver functions connect a CAN controller to the CANH and CANL conductors, while enhanced fault-tolerant behavior helps maintain bus operation when wiring faults occur. The 5 V to 28 V supply range supports common vehicle battery environments, and the 14-pin SOIC package supports compact surface-mount assemblies. Designers should route CANH and CANL as a coupled pair and follow the network termination requirements defined by the CAN system architecture.
추천
Vehicle Comfort and Convenience Systems
The TJA1055T/3/CM can connect door, lighting, climate, seat, or convenience controllers to a 125 kBd CAN network. Low-speed CAN is appropriate for distributed body functions where deterministic control messages and diagnostic communication matter more than very high bandwidth. The device combines differential transmit and receive functions with sleep and standby operating modes, allowing modules to reduce consumption when appropriate. Its AEC-Q100 identification supports automotive design qualification workflows, while fault-tolerant operation is valuable in wiring environments where transient or persistent bus faults must be handled.
추천
Low-Speed Automotive Diagnostics
The TJA1055T/3/CM is suitable for diagnostic interfaces that exchange service information with vehicle modules over a 125 kBd CAN bus. The physical-layer device connects the diagnostic controller to the differential bus while providing fault detection and fault-tolerant communication behavior. A 5 V to 28 V operating range accommodates automotive supply conditions, and the sleep and standby modes help manage inactive diagnostic equipment. PCB implementation should minimize loop area around CANH and CANL and use the termination arrangement required by the diagnostic network configuration.
추천
Industrial CAN Control Equipment
The TJA1055T/3/CM can provide the physical interface for industrial controllers operating a low-speed CAN network at 125 kBd. Its differential receive and transmit functions are appropriate for connecting a protocol controller to devices distributed over a two-wire bus. Although primarily described for passenger-car communication, the electrical interface can serve compatible industrial control systems. The 5 V to 28 V supply range offers design flexibility, while sleep and standby modes can reduce consumption in intermittently active equipment. Validate EMC, grounding, fault behavior, and termination against the final industrial installation.
추천
Embedded CAN Sensor Gateways
The TJA1055T/3/CM can serve as the CAN interface within embedded gateways that collect sensor data or distribute commands to remote modules. A 125 kBd CAN bus provides sufficient bandwidth for modest message rates while supporting a simple two-wire physical network. The transceiver’s differential signaling, fault-tolerant operation, and low-power modes are useful in distributed installations where wiring faults or inactive nodes may affect reliability. The controller interface and logic-level supply arrangement must be checked against the selected variant before implementation, and bus termination should follow the network topology.
추천
Automotive Infotainment Communication
The TJA1055T/3/CM can connect an infotainment or cabin controller to a low-speed CAN segment carrying status and control messages up to 125 kBd. Differential transmit and receive functions provide the physical interface between the host controller and CANH/CANL wiring, while sleep and standby modes help manage power in parked or inactive states. The 14-pin SOIC package is compatible with standard automotive PCB assembly methods, and AEC-Q100 identification supports automotive qualification. System engineers must still verify controller timing, supply sequencing, bus loading, and termination for the selected vehicle network.
추천
추천 제품 요약
엔지니어링 참조 데이터: TJA1055T/3/CM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TJA1054 | TJA1054A | TJA1055T/3/1 | TJA1055T/3/1J | TJA1055T/3/C-T |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Type | Enhanced fault-tolerant CAN transceiver | CAN transceiver | CAN transceiver | Enhanced fault-tolerant CAN transceiver | Enhanced fault-tolerant CAN transceiver | Fault-tolerant CAN transceiver |
| Pin-to-Pin Compatibility | Reference device | Documented as pin-to-pin compatible | Documented as pin-to-pin compatible | Same TJA1055T/3 family | Same TJA1055T/3 family | Same TJA1055T/3 family |
주요 차별점
- Enhanced fault-tolerant CAN interface (vs TJA1054)
- Documented pin-to-pin replacement path (vs TJA1054A)
- Same-family interface alternatives (vs TJA1055T/3/C-T)
설계 노트
Route CANH and CANL as a closely coupled differential pair with continuous reference to the board ground plane. Keep the transceiver close to the bus connector or CAN controller, minimize branch stubs, and avoid routing the pair through switching-power or high-current paths. Verify that the PCB land pattern follows the 14-pin SOIC drawing in the NXP datasheet and that pin 1 orientation matches the assembly package.
Do not treat physical pin compatibility as proof that every ordering variant is interchangeable. The TJA1055T/3 family includes ordering codes that identify interface, sourcing, or packing differences. Confirm the supply arrangement, controller logic levels, operating modes, temperature grade, and shipping format for the exact replacement. The TJA1054 and TJA1054A are specifically documented as pin-to-pin compatible, but their complete electrical characteristics still require review.
Apply the NXP reference circuit around the transceiver, including the specified decoupling and bus-interface components. Keep the supply and ground paths short, connect the device ground reference as directed, and account for voltage drop and transient conditions across the module wiring. The TJA1055T/3/CM supports a 5 V to 28 V range, but that rating does not eliminate the need for correct supply filtering and automotive transient protection.
규정 준수 정보
The product listing identifies the device as automotive AEC-Q100. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the product information and remain unknown.