Texas Instruments

TLV2783CD - Dual 3.6V 8MHz RRIO Op Amp | Texas Instruments

부품 번호: TLV2783CD ✓ 활성
3.6 V Vdss 14-pin SOIC Package
MOQ: 1 |

TLV2783CD 개요

The Texas Instruments TLV2783CD is a dual, general-purpose operational amplifier built around the TLV2783 family, with a 3.6 V nominal supply, 8 MHz gain-bandwidth product, rail-to-rail input and output operation, shutdown capability, and a 14-pin SOIC package. The 250 uV offset-voltage specification supports precision signal conditioning when paired with suitable external calibration and feedback components.

An operational amplifier is an active analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. Within the broader semiconductor hierarchy, the TLV2783CD belongs to the operational-amplifier class, then to analog ICs and signal-chain semiconductors. Rail-to-rail input and output operation allows the amplifier to approach both supply rails, which is useful in compact systems where signal range and board area are constrained.

The 8 MHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, feedback control, active filtering, and general instrumentation. Its rail-to-rail input capability supports sensing near the positive or negative supply rail, while rail-to-rail output improves dynamic range in low-voltage systems. The shutdown feature can reduce power consumption when signal-chain activity is not required, although a dedicated shutdown pin exists in this package configuration.

The TLV2783 family combines two amplifiers with a common supply in a 14-pin SOIC outline. A 250 uV input offset-voltage specification and low-noise general-purpose architecture make it suitable for sensors, buffered analog channels, and signal-conditioning stages. Its dual-channel configuration reduces the number of packages needed when a design requires two related analog functions, such as filtering plus buffering.

Typical applications include portable sensor interfaces, industrial instrumentation, low-voltage data-acquisition channels, audio preamplification, motor or actuator signal conditioning, and embedded control systems. The 3.6 V operating point suits compact equipment operating from low-voltage rails, while the 8 MHz bandwidth is appropriate for signals that do not require high-definition audio or wideband communications performance.

When laying out the circuit, keep feedback components and sensitive input nodes compact, provide normal bypassing at the supply pins, and account for output drive when driving capacitive loads. The shutdown state should be checked against downstream power-sequencing requirements, because forcing the output into a high-impedance state can influence the behavior of the surrounding circuit.

This page combines the TLV2783CD's core electrical characteristics with same-family drop-in options, package-aware comparisons, and practical guidance for low-voltage analog design. It is intended to accelerate component selection while keeping the distinction between confirmed device ratings and application-specific design assumptions clear.

드롭인 대체품: TLV2783CD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

TLV2783ACD

✅ 드롭인 ⚠️ 사양 미검증
📦 14-pin SOIC
Gain-bandwidth product increases from 8 MHz to 10 MHz, a 25% improvement, while retaining the 14-pin SOIC footprint.

📋 참조 대체품 (카탈로그에 없음)

TLV2785ACD

✅ 드롭인 ⚠️ 사양 미검증
📦 14-pin SOIC
Gain-bandwidth product increases from 8 MHz to 10 MHz, a 25% improvement, and the supply target changes from 3.6 V to 5 V.

📋 참조 대체품 (카탈로그에 없음)

TLV2785CD

✅ 드롭인 ⚠️ 사양 미검증
📦 14-pin SOIC
Gain-bandwidth product remains 8 MHz, while the nominal supply target changes from 3.6 V to 5 V, a difference of 1.4 V.

📋 참조 대체품 (카탈로그에 없음)

TLV2783CD 최대 정격 & 전기적 특성

Product Type Dual operational amplifier
Amplifier Count 2 circuits
Nominal Supply Voltage 3.6 V
Gain-Bandwidth Product 8 MHz
Input Offset Voltage 250 uV
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Control Shutdown pin
Application Classification General-purpose instrumentation and signal conditioning
Package Type 14-pin SOIC
실장 유형 Surface mount

TLV2783CD 14-pin soic 핀 구성 가이드

TLV2783CD(14-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

TLV2783CD의 14-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TLV2783CD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TLV2783CD 적합 용도: 6 애플리케이션s: Portable Sensor Signal Conditioning, Industrial Instrumentation and Data Acquisition, Low-Voltage Audio Preamplification, Actuator and Motor Control Interfaces, Embedded Control Signal Conditioning, Battery-Powered Measurement Module.

🧩

Portable Sensor Signal Conditioning

The TLV2783CD suits portable sensor modules that require two analog channels on a compact 3.6 V rail. Its rail-to-rail input behavior allows the amplifier to sense signals close to either supply limit, while the 250 uV offset-voltage specification helps preserve low-level sensor information. The dual 8 MHz amplifiers can condition one channel while buffering another or support active filtering. In a battery-powered design, the shutdown function can disable the analog path when measurements are not required, although power consumption and wake timing should be checked against the complete system duty cycle.

🏭

Industrial Instrumentation and Data Acquisition

The TLV2783CD is appropriate for compact data-acquisition front ends that process analog sensor signals close to the 3.6 V supply boundary. Rail-to-rail input and output operation increases usable signal range, and the 8 MHz gain-bandwidth product provides adequate response for many pressure, temperature, and position sensors. One channel can amplify the transducer output while the other drives an active filter or buffer. The 250 uV offset-voltage rating must be interpreted together with the required accuracy, because resistor tolerance, bias current, noise, and temperature drift can dominate the total error of a high-gain measurement chain.

🎧

Low-Voltage Audio Preamplification

The dual TLV2783CD can support two low-voltage audio preamplifier channels in portable or compact audio equipment powered from a 3.6 V rail. Rail-to-rail output operation provides additional signal swing before subsequent stages, while the 8 MHz gain-bandwidth product is suitable for general audio-band signal conditioning rather than ultra-high-definition video paths. The 250 uV offset specification is useful when the signal chain requires low DC offset. Input and feedback impedances should be chosen to avoid excessive loading, and the shutdown function should be coordinated with headphone, speaker, and microphone power states to prevent unintended transients.

⚡

Actuator and Motor Control Interfaces

The TLV2783CD can condition position, current, or voltage feedback in embedded actuator-control systems operating from a low-voltage rail. The dual arrangement allows one amplifier to sense a control signal and the other to buffer a reference or feedback node, reducing board area. Its rail-to-rail inputs are valuable when the sensed node moves across much of the 3.6 V supply range, and the 8 MHz bandwidth can support control-loop signals beyond static precision measurements. Feedback-network design must preserve loop stability, and the output must remain compatible with the actuator driver’s input impedance and common-mode range.

🖥️

Embedded Control Signal Conditioning

The TLV2783CD is useful in embedded systems that need local analog conditioning before an ADC samples sensor or control-node voltages. Running the amplifier at 3.6 V supports integration with low-power processors, while dual channels can amplify one sensor and buffer another reference. The 8 MHz gain-bandwidth product helps preserve amplitude and phase through moderate-bandwidth filters. Rail-to-rail operation supports wide common-mode sensing, but the system designer must still account for ADC input range, anti-alias filtering, amplifier settling time, and any shutdown interval during which the ADC may still be sampling.

📱

Battery-Powered Measurement Module

The TLV2783CD fits battery-powered measurement modules that process two low-level analog channels from a 3.6 V supply. Rail-to-rail sensing extends the usable input range without moving the circuit to a higher-voltage supply, and the dual amplifier count preserves PCB area. The 8 MHz gain-bandwidth product supports active filters and general signal conditioning while the shutdown function offers a direct way to disable the amplifiers between measurement intervals. Duty-cycle analysis should include wake-up latency, analog settling, and downstream converter behavior. High-impedance sensor nodes may also require guarding or leakage control to prevent unintended offsets.

What is the TLV2783CD?
The TLV2783CD is a Texas Instruments dual operational amplifier with a 3.6 V nominal supply, 8 MHz gain-bandwidth product, rail-to-rail input and output operation, and shutdown capability. According to the Texas Instruments TLV2783 product information, the device contains two amplifier circuits in a 14-pin SOIC package. It is intended for general-purpose instrumentation, buffering, filtering, and low-voltage analog signal conditioning.
What are the key specifications of TLV2783CD that engineers should know?
The TLV2783CD combines two amplifier circuits, an 8 MHz gain-bandwidth product, rail-to-rail input and output behavior, a 250 uV input offset-voltage specification, and shutdown control in a 14-pin SOIC package. Texas Instruments describes it as a 3.6 V dual RRIO operational amplifier with shutdown. These characteristics make it most relevant to low-voltage sensors, instrumentation, filtering, and buffered analog signal chains.
Where can I download the TLV2783CD datasheet PDF?
The TLV2783CD datasheet and ordering information are available from the Texas Instruments TLV2783 product page at https://www.ti.com/product/TLV2783. The manufacturer page provides the authoritative electrical characteristics, package information, pin descriptions, and ordering details needed for design review and PCB implementation. Use the pin-description table and recommended-layout material in that document before assigning tracks or making input and shutdown connections.
Where can I find the TLV2783CD pinout?
The TLV2783CD pinout is defined by its 14-pin SOIC package and is documented in the Texas Instruments TLV2783 datasheet. The package drawing identifies the pin numbering, while the pin-description table maps each terminal to the two amplifier channels, supply rails, and shutdown control. For board layout, preserve the manufacturer’s pin numbering orientation and do not infer an equivalent pin map from a different SOIC outline.
Is the TLV2783CD suitable for low-voltage sensor interfaces?
Yes, the TLV2783CD is suitable for low-voltage sensor interfaces because it combines rail-to-rail input operation with an 8 MHz gain-bandwidth product and a 250 uV offset-voltage specification. It can buffer sensor outputs whose useful range lies near either supply rail. The selected gain, feedback resistance, and input capacitance must still be evaluated for the sensor’s output impedance, noise, and required bandwidth.
What is the difference between TLV2783CD and TLV2785CD?
The TLV2783CD is the 3.6 V member of the dual TLV278x family, while the TLV2785CD is associated with a 5 V supply range. Both use a 14-pin SOIC format and provide dual rail-to-rail amplifiers with shutdown. The supply difference is the primary selection issue: use the 3.6 V part for a 3.6 V rail and the 5 V part when the power architecture requires a 5 V operating point.
TLV2783CD vs TLV2783ACD — which is better for a new design?
The TLV2783ACD is the improved A-version family member and is preferable when its higher bandwidth and specified enhancements are needed. The standard TLV2783CD provides an 8 MHz gain-bandwidth product and remains appropriate for conventional low-frequency instrumentation. Because both use the same 14-pin SOIC footprint, the choice should follow the complete electrical requirements rather than package convenience alone.
When should I choose TLV2783CD over TLV2785CD?
Choose the TLV2783CD when the circuit is powered from a 3.6 V rail and its 8 MHz gain-bandwidth product is sufficient. Choose the TLV2785CD when the system operates from a 5 V rail and the wider supply capability is required. Because the shutdown behavior and amplifier functions are closely related, supply voltage, input range, output swing, and downstream power requirements should determine the final choice.
Can TLV2783ACD replace TLV2783CD on the same PCB?
The TLV2783ACD can serve as a drop-in replacement candidate because it belongs to the same TLV2783 family and uses the same 14-pin SOIC footprint. Check the manufacturer’s comparison of input range, output swing, supply limits, shutdown behavior, stability, and package tolerances before production use. A shared footprint alone does not remove the need to verify operating conditions and timing around shutdown.
What can replace the TLV2783CD?
The TLV2783ACD is the closest same-family drop-in candidate for a TLV2783CD design because it retains the 14-pin SOIC footprint while offering the A-version performance improvements. The TLV2785ACD and TLV2785CD are also footprint-compatible family options, but their supply-voltage requirements must match the board. Confirm stability, output loading, shutdown polarity, and operating range in the manufacturer documentation before substitution.
Where can I buy TLV2783CD online?
Use the Request a Quote form on this page to request current TLV2783CD pricing, stock status, lead time, and order quantity. The form connects directly with XAIPART’s sales workflow and avoids stale pricing. Include the target quantity, acceptable delivery date, and whether reel, cut-tape, tray, or bulk packaging is required so the quote can reflect the correct procurement conditions.
What is the price of TLV2783CD?
Current TLV2783CD pricing is shown through the Request a Quote form on this page rather than embedded in the technical description. Pricing can vary with quantity, package packing, currency, and current component supply, so a direct quote request is the appropriate procurement method. Submit the required quantity and packaging preference to receive a current response tied to the exact TLV2783CD order number.
What is the lead time for TLV2783CD?
Current lead time for TLV2783CD should be requested through the Request a Quote form on this page. The manufacturer product page identifies the device and its ordering information, while inventory and delivery timing can change independently of technical specifications. Provide your required quantity, target delivery date, and approved package format when requesting the quotation.
Is TLV2783CD in stock?
Use the Request a Quote form on this page to check the current TLV2783CD stock position and lead time. The form lets you specify the exact quantity and package format required for your production plan. Because stock levels are time-sensitive, treat the quote response as the current procurement commitment rather than relying on a static availability statement.
How should shutdown be used in a TLV2783CD circuit?
The TLV2783CD includes dedicated shutdown control for reducing amplifier activity when it is not needed. Connect the shutdown function according to the manufacturer’s truth table and logic-level requirements, and verify its state during startup and reset. Because shutdown may place an output in a high-impedance state, confirm that the following stage remains safe when the amplifier is disabled.

엔지니어링 참조 데이터: TLV2783CD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TLV2783CD for compact, dual-channel analog designs powered from a 3.6 V rail when 8 MHz gain-bandwidth product, rail-to-rail input and output operation, and shutdown control meet the design requirements. Choose the TLV2783ACD when the same 14-pin footprint is desired but the higher 10 MHz bandwidth provides useful design margin or signal-processing capability. Consider the TLV2785ACD for a 5 V rail where the improved bandwidth is useful, and the TLV2785CD for a 5 V rail where 8 MHz bandwidth is sufficient. Before committing to a replacement, verify the manufacturer’s operating limits, input and output ranges, shutdown truth table, load behavior, and stability requirements. No cross-brand drop-in substitute is presented because the cross-reference results do not establish a candidate with both the same 14-pin SOIC footprint and verified parametric compatibility.

대체품과의 비교

파라미터 이 제품 TLV2783ACD TLV2785ACD TLV2785CD
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Amplifier Count 2 circuits 2 circuits 2 circuits 2 circuits
Nominal Supply Voltage 3.6 V 3.6 V 5 V 5 V
Gain-Bandwidth Product 8 MHz 10 MHz 10 MHz 8 MHz
Shutdown Control Yes Yes Yes Yes
General-Purpose Amplifier Yes Yes Yes Yes

주요 차별점

  • Higher-bandwidth same-package upgrade (vs TLV2783ACD)
  • Direct 3.6 V fit for existing low-voltage boards (vs TLV2785CD)
  • Two amplifiers with rail-to-rail signal range (vs TLV2783ACD)

설계 노트

Place the power-supply bypass capacitor close to the 14-pin SOIC supply pins, and route the connection with minimal loop area. Keep the two amplifier inputs, feedback resistors, and their ground-return paths away from the shutdown trace and digital switching nodes. Because the device supports rail-to-rail input operation, the input common-mode range remains a critical stability boundary even when the signal stays near a supply rail.

Do not assume that shutdown merely reduces supply current while preserving the previous output voltage. Depending on the device’s internal state, the output may become high-impedance and can be influenced by downstream leakage or feedback components. Define the valid signal state during disable, add pull resistors where required by the system architecture, and verify startup and shutdown sequencing with the complete analog chain connected.

Choose the closed-loop gain and feedback resistor values with the 8 MHz gain-bandwidth product in mind. A high-gain stage can show reduced phase margin or ringing if excessive capacitance is present at the input or output. Use short feedback paths, keep sensor nodes high impedance only when their bandwidth permits, and test the assembled board with realistic source impedance, loading, supply decoupling, and shutdown transitions.

For a 3.6 V rail, separate analog signal paths from digital switching returns and provide local bypass at the amplifier. Rail-to-rail operation improves signal range but does not remove the need for clean supply voltage. Confirm the exact operating limits, output-current capability, and shutdown current in the manufacturer datasheet before setting the regulator headroom for maximum output load and temperature.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The TLV2783CD is a general-purpose operational amplifier. No specific RoHS, REACH, halogen-free, or conflict-minerals statement was identified for the exact orderable MPN.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TLV2783CD datasheet TLV2783CD pinout TLV2783CD datasheet pdf TLV2783CD equivalent TLV2783CD replacement TLV2783CD footprint TLV2783CD schematic TLV2783CD application circuit TLV2783CD vs TLV2783ACD Texas Instruments TLV2783CD TLV2783CD 14-SOIC TLV2783CD price TLV2783CD stock TLV2783CD 8MHz amplifier

관련 부품 & 용어

Texas Instruments TLV2783CD TLV2783ACD TLV2785ACD TLV2785CD operational amplifier dual amplifier analog IC signal conditioner rail-to-rail input rail-to-rail output RRIO gain-bandwidth product input offset voltage shutdown control 3.6 V power supply 14-pin SOIC surface-mount package active filter sensor interface data acquisition industrial instrumentation portable electronics battery-powered measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기