TLV2783CD - Dual 3.6V 8MHz RRIO Op Amp | Texas Instruments
MPN: TLV2783CD ✓ Hoạt độngTLV2783CD Tóm tắt
An operational amplifier is an active analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. Within the broader semiconductor hierarchy, the TLV2783CD belongs to the operational-amplifier class, then to analog ICs and signal-chain semiconductors. Rail-to-rail input and output operation allows the amplifier to approach both supply rails, which is useful in compact systems where signal range and board area are constrained.
The 8 MHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, feedback control, active filtering, and general instrumentation. Its rail-to-rail input capability supports sensing near the positive or negative supply rail, while rail-to-rail output improves dynamic range in low-voltage systems. The shutdown feature can reduce power consumption when signal-chain activity is not required, although a dedicated shutdown pin exists in this package configuration.
The TLV2783 family combines two amplifiers with a common supply in a 14-pin SOIC outline. A 250 uV input offset-voltage specification and low-noise general-purpose architecture make it suitable for sensors, buffered analog channels, and signal-conditioning stages. Its dual-channel configuration reduces the number of packages needed when a design requires two related analog functions, such as filtering plus buffering.
Typical applications include portable sensor interfaces, industrial instrumentation, low-voltage data-acquisition channels, audio preamplification, motor or actuator signal conditioning, and embedded control systems. The 3.6 V operating point suits compact equipment operating from low-voltage rails, while the 8 MHz bandwidth is appropriate for signals that do not require high-definition audio or wideband communications performance.
When laying out the circuit, keep feedback components and sensitive input nodes compact, provide normal bypassing at the supply pins, and account for output drive when driving capacitive loads. The shutdown state should be checked against downstream power-sequencing requirements, because forcing the output into a high-impedance state can influence the behavior of the surrounding circuit.
This page combines the TLV2783CD's core electrical characteristics with same-family drop-in options, package-aware comparisons, and practical guidance for low-voltage analog design. It is intended to accelerate component selection while keeping the distinction between confirmed device ratings and application-specific design assumptions clear.
Bộ thay thế dễ dàng lắp đặt cho TLV2783CD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TLV2783ACD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TLV2785ACD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TLV2785CD
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TLV2783CD Tỷ lệ tối đa & tính chất điện
| Product Type | Dual operational amplifier |
| Amplifier Count | 2 circuits |
| Nominal Supply Voltage | 3.6 V |
| Gain-Bandwidth Product | 8 MHz |
| Input Offset Voltage | 250 uV |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Control | Shutdown pin |
| Application Classification | General-purpose instrumentation and signal conditioning |
| Package Type | 14-pin SOIC |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân TLV2783CD 14-pin soic
Cấu hình chân cho TLV2783CD (14-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TLV2783CD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TLV2783CD phù hợp cho 6 Áp dụngs: Portable Sensor Signal Conditioning, Industrial Instrumentation and Data Acquisition, Low-Voltage Audio Preamplification, Actuator and Motor Control Interfaces, Embedded Control Signal Conditioning, Battery-Powered Measurement Module.
Portable Sensor Signal Conditioning
The TLV2783CD suits portable sensor modules that require two analog channels on a compact 3.6 V rail. Its rail-to-rail input behavior allows the amplifier to sense signals close to either supply limit, while the 250 uV offset-voltage specification helps preserve low-level sensor information. The dual 8 MHz amplifiers can condition one channel while buffering another or support active filtering. In a battery-powered design, the shutdown function can disable the analog path when measurements are not required, although power consumption and wake timing should be checked against the complete system duty cycle.
Industrial Instrumentation and Data Acquisition
The TLV2783CD is appropriate for compact data-acquisition front ends that process analog sensor signals close to the 3.6 V supply boundary. Rail-to-rail input and output operation increases usable signal range, and the 8 MHz gain-bandwidth product provides adequate response for many pressure, temperature, and position sensors. One channel can amplify the transducer output while the other drives an active filter or buffer. The 250 uV offset-voltage rating must be interpreted together with the required accuracy, because resistor tolerance, bias current, noise, and temperature drift can dominate the total error of a high-gain measurement chain.
Low-Voltage Audio Preamplification
The dual TLV2783CD can support two low-voltage audio preamplifier channels in portable or compact audio equipment powered from a 3.6 V rail. Rail-to-rail output operation provides additional signal swing before subsequent stages, while the 8 MHz gain-bandwidth product is suitable for general audio-band signal conditioning rather than ultra-high-definition video paths. The 250 uV offset specification is useful when the signal chain requires low DC offset. Input and feedback impedances should be chosen to avoid excessive loading, and the shutdown function should be coordinated with headphone, speaker, and microphone power states to prevent unintended transients.
Actuator and Motor Control Interfaces
The TLV2783CD can condition position, current, or voltage feedback in embedded actuator-control systems operating from a low-voltage rail. The dual arrangement allows one amplifier to sense a control signal and the other to buffer a reference or feedback node, reducing board area. Its rail-to-rail inputs are valuable when the sensed node moves across much of the 3.6 V supply range, and the 8 MHz bandwidth can support control-loop signals beyond static precision measurements. Feedback-network design must preserve loop stability, and the output must remain compatible with the actuator driver’s input impedance and common-mode range.
Embedded Control Signal Conditioning
The TLV2783CD is useful in embedded systems that need local analog conditioning before an ADC samples sensor or control-node voltages. Running the amplifier at 3.6 V supports integration with low-power processors, while dual channels can amplify one sensor and buffer another reference. The 8 MHz gain-bandwidth product helps preserve amplitude and phase through moderate-bandwidth filters. Rail-to-rail operation supports wide common-mode sensing, but the system designer must still account for ADC input range, anti-alias filtering, amplifier settling time, and any shutdown interval during which the ADC may still be sampling.
Battery-Powered Measurement Module
The TLV2783CD fits battery-powered measurement modules that process two low-level analog channels from a 3.6 V supply. Rail-to-rail sensing extends the usable input range without moving the circuit to a higher-voltage supply, and the dual amplifier count preserves PCB area. The 8 MHz gain-bandwidth product supports active filters and general signal conditioning while the shutdown function offers a direct way to disable the amplifiers between measurement intervals. Duty-cycle analysis should include wake-up latency, analog settling, and downstream converter behavior. High-impedance sensor nodes may also require guarding or leakage control to prevent unintended offsets.
Dữ liệu tham khảo kỹ thuật cho TLV2783CD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TLV2783ACD | TLV2785ACD | TLV2785CD |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Amplifier Count | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Nominal Supply Voltage | 3.6 V | 3.6 V | 5 V | 5 V |
| Gain-Bandwidth Product | 8 MHz | 10 MHz | 10 MHz | 8 MHz |
| Shutdown Control | Yes | Yes | Yes | Yes |
| General-Purpose Amplifier | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Higher-bandwidth same-package upgrade (vsTLV2783ACD)
- Direct 3.6 V fit for existing low-voltage boards (vsTLV2785CD)
- Two amplifiers with rail-to-rail signal range (vsTLV2783ACD)
Ghi chú thiết kế
Place the power-supply bypass capacitor close to the 14-pin SOIC supply pins, and route the connection with minimal loop area. Keep the two amplifier inputs, feedback resistors, and their ground-return paths away from the shutdown trace and digital switching nodes. Because the device supports rail-to-rail input operation, the input common-mode range remains a critical stability boundary even when the signal stays near a supply rail.
Do not assume that shutdown merely reduces supply current while preserving the previous output voltage. Depending on the device’s internal state, the output may become high-impedance and can be influenced by downstream leakage or feedback components. Define the valid signal state during disable, add pull resistors where required by the system architecture, and verify startup and shutdown sequencing with the complete analog chain connected.
Choose the closed-loop gain and feedback resistor values with the 8 MHz gain-bandwidth product in mind. A high-gain stage can show reduced phase margin or ringing if excessive capacitance is present at the input or output. Use short feedback paths, keep sensor nodes high impedance only when their bandwidth permits, and test the assembled board with realistic source impedance, loading, supply decoupling, and shutdown transitions.
For a 3.6 V rail, separate analog signal paths from digital switching returns and provide local bypass at the amplifier. Rail-to-rail operation improves signal range but does not remove the need for clean supply voltage. Confirm the exact operating limits, output-current capability, and shutdown current in the manufacturer datasheet before setting the regulator headroom for maximum output load and temperature.
Thông tin tuân thủ
The TLV2783CD is a general-purpose operational amplifier. No specific RoHS, REACH, halogen-free, or conflict-minerals statement was identified for the exact orderable MPN.