TPD1E10B06DPYR - Single-Channel ESD TVS Diode, ±30kV | TI
부품 번호: TPD1E10B06DPYR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0.36 | $0.36 |
| 10 | $0.32 | $3.20 |
| 100 | $0.27 | $27.00 |
| 500 | $0.22 | $110.00 |
| 1,000 | $0.18 | $180.00 |
| 3,000 | $0.15 | $450.00 |
TPD1E10B06DPYR 개요
What is a TVS diode? A TVS (transient voltage suppressor) diode is a clamping semiconductor that diverts ESD and surge energy away from sensitive downstream ICs. Within the protection hierarchy (TVS -> protection diode -> discrete semiconductor -> electronic component), TVS arrays sit closest to external connectors, where they shunt fast transients (ns-scale ESD, µs-scale surge) before they reach ASICs, MCUs, or analog front-ends. The TPD1E10B06 family uses a back-to-back configuration to handle bipolar signals.
Key specifications include 12pF (typical, per DigiKey listing; datasheet lists 10pF IO capacitance typical and 12pF line capacitance) line capacitance, 0.37 Ω dynamic resistance (R_DYNAMIC), and ±6V minimum DC breakdown voltage. The 0402-class footprint frees PCB real estate for high-density mobile and wearable designs where every square millimeter matters. The device is rated for ultra-low leakage current, minimizing quiescent loss on protected lines.
Architecturally, the TPD1E10B06 uses a silicon TVS structure with back-to-back Zener diodes, achieving system-level IEC 61000-4-2 ESD immunity. Its low capacitance suits data lines like USB VBUS/ID, audio (microphone, headphone, speakerphone), SD card interfaces, keypads, and GPIO. The bidirectional capability removes the need for two unidirectional TVS in many use cases, halving the BOM on differential or AC-coupled lines.
Typical applications include protection for audio lines (microphone, earphone, speakerphone), SD card interfaces, keypad buttons, USB port VBUS/ID pins, and general-purpose GPIO. End-equipment targets are portable devices, wearables, set-top boxes, electronic point-of-sale terminals, and appliances. The low 12pF capacitance preserves signal integrity on high-speed interfaces.
Design tip: place the TPD1E10B06DPYR as close as possible to the external connector with a short, low-inductance ground return. Use a dedicated TVS ground via directly to the chassis/ground plane to maximize the IEC 61000-4-2 discharge current path and avoid coupling noise into adjacent signal traces. This component is also available in a larger SOD-523 (DPYT) variant on the same datasheet for layouts needing a different footprint.
드롭인 대체품: TPD1E10B06DPYR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TPD1E10B06DPYR (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Clamping Voltage, Line Capacitance, Peak Pulse Current.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청TPD1E10B06DPYR 최대 정격 & 전기적 특성
| Device Type | Single-channel ESD protection TVS diode |
| Polarity | Bidirectional (back-to-back TVS) |
| Working Voltage (Vrwm) | 5 V (typical); 14 V clamp at 5 A Ipp |
| DC Breakdown Voltage | ±6 V (minimum) |
| Peak Pulse Current (Ipp) | 5 A (8/20 µs) |
| ESD Contact Discharge | ±30 kV (IEC 61000-4-2) |
| ESD Air-Gap Discharge | ±30 kV (IEC 61000-4-2) |
| Line Capacitance | 12 pF (typical) |
| IO Capacitance | 10 pF (typical) |
| Dynamic Resistance (R_DYNAMIC) | 0.37 Ω |
| Leakage Current | Ultra-low (nA range per datasheet) |
| 패키지 | X1SON / 2-X1SON (DPY), 1.0 x 0.6 mm |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 °C to +125 °C |
| ESD Standard | IEC 61000-4-2 Level 4 (Air & Contact) |
| RoHS 상태 | Compliant |
| MSL 레벨 | Level 3 (per PartGenie summary) |
TPD1E10B06DPYR x1son / 2-x1son (dpy), 1.0 x 0.6 mm 핀 구성 가이드
TPD1E10B06DPYR(x1son / 2-x1son (dpy), 1.0 x 0.6 mm 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: TPD1E10B06DPYR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TPD1E10B06DPYR 적합 용도: 3 애플리케이션s: 전력 관리, 모터 제어, LED 조명.
전력 관리
TPD1E10B06DPYR을(를) 사용한 전원 공급 회로의 스위칭 및 레귤레이션.
모터 제어
TPD1E10B06DPYR을(를) 사용한 DC/BLDC 모터 구동 및 제어.
LED 조명
TPD1E10B06DPYR을(를) 사용한 LED 스트링 및 어레이 구동.
엔지니어링 참조 데이터: TPD1E10B06DPYR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TPD1E10B06DPYT | TPD1E10B04DPYR | TPD1E10B06QDPYRQ1 |
|---|---|---|---|---|
| Package | 2-X1SON (DPY), 1.0 x 0.6 mm | SOD-523 (DPYT) - different land pattern, same die | 2-X1SON (DPY) - same footprint | 2-X1SON (DPY) Q1 - same footprint |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Working Voltage (Vrwm) | 5 V | 5 V | 3.6 V | 5 V |
| ESD Rating (Contact / Air-Gap) | ±30 kV / ±30 kV | ±30 kV / ±30 kV | ±30 kV / ±30 kV | ±30 kV / ±30 kV |
| Polarity | Bidirectional | Bidirectional | Bidirectional | Bidirectional |
| Automotive Grade (AEC-Q100) | No | No | No | Yes (Q1 suffix) |
주요 차별점
- Smallest bidirectional TVS footprint in TI's 5 V ESD portfolio (vs TPD1E10B06DPYT (SOD-523))
- AEC-Q100 qualified drop-in available (vs TPD1E10B06DPYR (industrial))
- Higher working voltage than TPD1E10B04 (vs TPD1E10B04DPYR)
설계 노트
Place the TPD1E10B06DPYR within 2-3 mm of the external connector pads to minimize the inductance of the discharge path. Use a dedicated short, wide TVS-ground via directly under the device's ground terminal to the chassis/ground plane; long ground returns turn the discharge inductance into a secondary clamp-voltage overshoot that defeats the TVS.
Route the protected trace on a single layer (avoid vias on the protected path). Keep the trace impedance matched because the TPD1E10B06DPYR adds 12 pF capacitance; for USB 2.0 (480 Mbps) and similar interfaces this is on the upper edge of acceptable parasitic load, so account for it in your signal-integrity budget.
Do not stack the TPD1E10B06DPYR on the same line as a series ferrite bead without verifying that the bead's saturation current and DC resistance do not push the protected line voltage outside the ±6 V DC breakdown of the TVS. Also avoid using the TVS on lines whose nominal operating voltage exceeds 5 V for extended periods; the part's Vrwm is 5 V and prolonged exposure above that accelerates leakage degradation.
The TPD1E10B06DPYR's 12 pF capacitance is acceptable for sub-100 MHz signals (USB low/full speed, audio, GPIO, SD card) but may attenuate edges on HDMI/MIPI/USB 3.0. For these higher-speed interfaces choose a lower-capacitance TVS in TI's TPD1E04U04 or similar sub-1 pF family. Estimated: the RC rise-time constant (assuming 50 Ω source) is ~600 ps, well below USB 2.0 Hi-Speed unit interval of 2.08 ns.
규정 준수 정보
RoHS-compliant per TI product page and PartGenie summary. The Q1 variant TPD1E10B06QDPYRQ1 is AEC-Q100 qualified for automotive use; the standard DPYR part is industrial/consumer grade. REACH, halogen-free, and conflict-mineral status not explicitly stated in the verified web data.
