TS924IDT - Quad Rail-to-Rail Op Amp, 4 MHz | STMicroelectronics
부품 번호: TS924IDT ✓ 활성TS924IDT 개요
An operational amplifier is an active analog signal-conditioning device that amplifies the voltage difference between its inverting and non-inverting inputs. The TS924 belongs to the quad operational-amplifier family, placing four amplifiers in one package to reduce component count in multi-channel instrumentation. Its rail-to-rail input and output architecture supports low-voltage signal chains in which the usable common-mode and output ranges extend close to the supply rails.
The BiCMOS construction combines bipolar input transistors with CMOS output stages. In the TS924, this architecture supports low input-bias current of 15 nA, a 4 MHz unity-gain bandwidth, and 1.3 V/µs slew rate. The device is specified for both 3 V and 5 V systems and operates across a supply range of 2.7 V to 12 V. The operating temperature range extends from -40 °C to +125 °C.
Typical applications include current-to-voltage conversion in precision measurement systems, sensor-signal conditioning, low-voltage audio circuits, active filtering, and general-purpose analog signal conditioning. Because four matched amplifier channels share one package, designers can also use the device for dual-rail control loops, quad sensor interfaces, and multi-axis signal acquisition.
When laying out a TS924IDT circuit, place each decoupling capacitor close to its corresponding supply pin and keep feedback resistors and input traces short to minimize parasitic capacitance. Verify the input common-mode range, output-current capability, and capacitive-load stability against the load connected to each amplifier. The SO-14 outline is suitable for conventional surface-mount assembly and supports design reuse across the STMicroelectronics TS92x family.
This page consolidates the manufacturer specifications, package and lifecycle information, price references, cross-reference findings, and practical design guidance into one engineering-focused resource for evaluating the TS924IDT in new analog designs.
드롭인 대체품: TS924IDT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TS924IDT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Amplifier Type, Supply Voltage Range, RoHS Status, Slew Rate.
TS924AIDT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TS924ID
✅ 드롭인가격 문의
데이터시트 보기 →TS925IDT
✅ 드롭인가격 문의
데이터시트 보기 →TS924AID
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TS925ID
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →TS925AIDT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TS924IDT 최대 정격 & 전기적 특성
| Number of Amplifiers | 4 |
| Amplifier Type | General-purpose operational amplifier |
| Architecture | BiCMOS |
| Rail-to-Rail | Input and output |
| Supply Voltage Range | 2.7 V to 12 V |
| Optimized Supply Voltage | 3 V and 5 V |
| Gain-Bandwidth Product | 4 MHz |
| Slew Rate | 1.3 V/µs |
| Input Bias Current | 15 nA |
| 동작 온도 범위 | -40 °C to +125 °C |
| 패키지 | 14-pin Small Outline (SO-14) |
| 실장 유형 | Surface mount |
| Output Current Capability | High output current |
| RoHS 상태 | Compliant |
| 수명 주기 상태 | Active |
| Manufacturer Lead Time | 3-7 business days |
TS924IDT 핀 구성
| 핀 1 | OUT1 — Amplifier 1 output |
| 핀 2 | -IN1 — Amplifier 1 inverting input |
| 핀 3 | +IN1 — Amplifier 1 non-inverting input |
| 핀 4 | V- — Negative supply or ground |
| 핀 5 | +IN2 — Amplifier 2 non-inverting input |
| 핀 6 | -IN2 — Amplifier 2 inverting input |
| 핀 7 | OUT2 — Amplifier 2 output |
| 핀 8 | OUT3 — Amplifier 3 output |
| 핀 9 | -IN3 — Amplifier 3 inverting input |
| 핀 10 | +IN3 — Amplifier 3 non-inverting input |
| 핀 11 | V+ — Positive supply |
| 핀 12 | +IN4 — Amplifier 4 non-inverting input |
| 핀 13 | -IN4 — Amplifier 4 inverting input |
| 핀 14 | OUT4 — Amplifier 4 output |
일반적인 애플리케이션
TS924IDT 적합 용도: 6 애플리케이션s: Precision Sensor Signal Conditioning, Low-Voltage Audio Output Stages, Active Filtering and Equalization, Current-to-Voltage Measurement, Industrial Control and Data Acquisition, Portable and Battery-Powered Instruments.
Precision Sensor Signal Conditioning
The TS924IDT suits four-channel sensor conditioning because its four rail-to-rail amplifiers fit into one 14-pin SO package while maintaining 15 nA input-bias current. Connect each amplifier as a non-inverting or differential stage around a resistive sensor network, then place a short feedback path close to the device. The 4 MHz gain-bandwidth product supports useful closed-loop bandwidth above audio frequencies, while the 1.3 V/µs slew rate produces full-scale transitions quickly. For high-impedance sensors, evaluate input leakage, offset voltage, and noise over the -40 °C to +125 °C operating range before fixing the gain.
추천
Low-Voltage Audio Output Stages
For headphone buffers, line-level output stages, or small-signal audio amplification, the TS924IDT provides rail-to-rail output behavior and a 1.3 V/µs slew rate in a 3 V or 5 V design. Its high-output-current architecture is intended to support moderate capacitive and resistive loads more effectively than a general-purpose micropower amplifier. Place output resistors or isolation networks where required by the load, and verify capacitive-load stability from the manufacturer guidance. The four channels can support dual stereo pairs or a mixer architecture without requiring four separate amplifier packages.
추천
Active Filtering and Equalization
The TS924IDT is appropriate for active filters and equalizer sections where multiple identical amplifiers share one package. A 4 MHz gain-bandwidth product gives sufficient loop-gain reserve for many low-frequency filter sections, and the 1.3 V/µs slew rate helps preserve signal amplitude through fast transitions. Build each second-order section with local feedback resistors and capacitors, keeping the amplifier output separated from high-impedance summing nodes. Check stability with the actual source impedance and load capacitance, especially when the filter also performs current-to-voltage conversion.
추천
Current-to-Voltage Measurement
The TS924IDT can implement transimpedance amplifiers for photodiodes, electrochemical sensors, and other current-producing devices. Its 15 nA input-bias current reduces the error associated with high-value feedback resistors, while the 4 MHz bandwidth and 1.3 V/µs slew rate support responsive measurement of transient currents. Use a guarded, low-leakage feedback node and avoid long PCB traces into the inverting input. Because photodiode capacitance and cable capacitance can destabilize the high-gain stage, follow the application guidance in the manufacturer datasheet or add an isolation resistor and compensation capacitor.
추천
Industrial Control and Data Acquisition
The -40 °C to +125 °C operating range and 2.7 V to 12 V supply capability make the TS924IDT suitable for industrial control boards that condition several low-level channels. The quad configuration can amplify thermocouple, bridge-sensor, pressure, or position-sensor outputs without requiring four separate amplifiers. For 24 V industrial environments, regulate the supply down to the supported range before the device. Verify input protection, transient immunity, grounding, and channel-to-channel isolation according to the final EMC and safety requirements of the end equipment.
추천
Portable and Battery-Powered Instruments
A portable instrument running from a 3 V or 5 V rail can use the TS924IDT when rail-to-rail signal handling is more important than minimum quiescent current. The device combines four amplifiers in a single SO-14 package, reducing board area compared with four separate single-amplifier packages. Its low-bias-current input stage also suits sensors with high source impedances. Current consumption still depends on the complete signal chain and selected operating point, so evaluate quiescent current for the intended duty cycle and confirm the battery voltage range against the device specifications.
추천
추천 제품 요약
엔지니어링 참조 데이터: TS924IDT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TS924AIDT | TS924ID | TS925IDT | TS924AID | TS925ID |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | SO-14 | SO-14 | SO-14 | SO-14 | SO-14 | SO-14 |
| Number of Amplifiers | 4 | 4 | 4 | 4 | 4 | 4 |
| Architecture | BiCMOS | BiCMOS | BiCMOS | BiCMOS | BiCMOS | BiCMOS |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V | 2.7 V to 12 V | 2.7 V to 12 V | 2.7 V to 12 V | 2.7 V to 12 V |
| Optimized Operating Point | 3 V and 5 V | 3 V and 5 V | 3 V and 5 V | 3 V and 5 V | 3 V and 5 V | 3 V and 5 V |
| Rail-to-Rail Operation | Input and output | Input and output | Input and output | Input and output | Input and output | Input and output |
주요 차별점
- Four-channel integration in one package (vs LM2902N/PB)
- Rail-to-rail signal handling at low supply voltage (vs LM2902N/PB)
- Specified dynamic performance for the TS924 family (vs TS925IDT)
- Low-bias-current input stage for sensor interfaces (vs LM324ADR)
설계 노트
Route the four inverting-input and four non-inverting-input connections away from the supply pins and output traces. High-impedance inputs are particularly sensitive to leakage through contaminated PCB surfaces or nearby high-impedance nets. Place the input-bias-current compensation or guarding network recommended in the manufacturer application guidance directly beside the relevant input pin rather than extending it across the board.
Place the supply bypass capacitor immediately across the V+ and V- pins, with the shortest possible ground return. Because the package contains four amplifiers sharing one supply connection, the total supply current is four times the average current drawn by each channel. Use a regulator and capacitor arrangement that can supply the summed channel current plus transient demand without producing supply droop that distorts all four outputs simultaneously.
Do not assume that an identical 14-pin footprint guarantees identical behavior. When substituting TS924AIDT, TS925IDT, TS924AID, or TS925ID, verify input common-mode range, output swing, input offset, noise, slew rate, bandwidth, and capacitive-load stability at the intended supply voltage. The TS924IDT's 4 MHz bandwidth and 1.3 V/µs slew rate should be compared with the selected alternative before releasing a production change.
Keep feedback components close to the associated amplifier pins and avoid routing the high-impedance summing node beneath or between output traces. For transimpedance applications, minimize the capacitance at the inverting input and follow the datasheet's guidance for stability with photodiode or cable capacitance. An isolation resistor between the source and inverting input can help control high-frequency feedback when the physical board cannot be optimized.
규정 준수 정보
RoHS compliance is identified for the exact TS924IDT ordering code. No automotive qualification is claimed for this general-purpose amplifier.