STMicroelectronics

TS942AIN - Dual Rail-to-Rail Micropower Op Amp | STMicroelectronics

부품 번호: TS942AIN ✗ 단종
2.5 V to 10 V Vdss 1.2 uA typical Id 8-DIP, 0.300 inch pitch, 7.62 mm Package
MOQ: 1 |

TS942AIN 개요

STMicroelectronics TS942AIN is a dual general-purpose operational amplifier designed for low-voltage, low-power signal-conditioning systems. The device provides rail-to-rail output operation, a 2.5 V to 10 V supply range, and a micropower supply current of approximately 1.2 uA per channel. It is packaged in an 8-pin Mini DIP configuration for through-hole assembly.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while offering high input impedance, low output impedance, and stable operation around the supply rails. The TS942AIN belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and power-management-dependent semiconductor. Its rail-to-rail output stage is useful when the required output signal must approach the positive or negative supply limit.

The principal features of the TS942AIN include low quiescent current, dual-channel configuration, rail-to-rail output capability, and operation from 2.5 V to 10 V. The low 1.2 uA per-channel supply current reduces the burden on battery-powered or energy-harvesting systems. A typical output current of 5 mA is suitable for normal low-frequency analog signal paths, subject to the load, voltage, and stability limits defined by the manufacturer.

The TS94x family is characterized for operation from 2.5 V to 10 V over a -40 °C to +85 °C temperature range. TS942AIN is the dual-amplifier version with a Mini DIP package. The 8-pin through-hole package supports conventional PCB assembly and is convenient when a compact surface-mount package is not required. Rail-to-rail output behavior improves signal swing in low-voltage instrumentation, sensor interfaces, and portable measurement circuits.

Typical applications include portable sensor conditioning, low-power monitoring, current-loop interfaces, and low-voltage analog signal processing. In a sensor circuit, the TS942AIN can amplify a small transducer voltage while operating from a compact supply. In a portable measurement system, its micropower operation helps limit standby consumption. When driving larger capacitive loads or operating at higher frequencies, the designer should verify the applicable stability and load-current limits in the manufacturer datasheet.

For PCB design, place the device close to the signal source and preserve short analog input traces to reduce susceptibility to noise and parasitic loading. Decouple the power supply with a local bypass capacitor and route return currents away from sensitive signal paths. The manufacturer product page and the TS942AIN datasheet should be used to confirm the exact pin assignment, electrical limits, input common-mode range, output swing, and recommended operating conditions.

This page combines the manufacturer family information with practical selection guidance, package details, sourcing information, and engineering considerations. It is intended to help engineers determine whether the TS942AIN’s dual low-power architecture and 8-pin Mini DIP format fit a specific analog design before finalizing the schematic and PCB layout.

드롭인 대체품: TS942AIN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: TS942AIN (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Number of Amplifier Channels, Number of Pins.

STMicroelectronics
Package: 8-SOIC (0.154 inch, 3.90 mm width)
Mounting Type: Surface mount
Number of Amplifier Channels: 2
비교 대상: TS942AIN →
STMicroelectronics
Package: 8-SOIC
Mounting Type: Surface mount
Number of Amplifier Channels: 2 channels
비교 대상: TS942AIN →

TS942AID

✅ 드롭인
STMicroelectronics
📦 8-DIP
Dual operational amplifier · 2 · 2.5 V to 10 V · -40 °C to +85 °C · Rail-to-rail · 1 pA · 5 mA · 1.2 µA per channel

가격 문의

데이터시트 보기 →

TS942AID

✅ 드롭인
STMicroelectronics
📦 8-DIP
Dual operational amplifier · 2 · 2.5 V to 10 V · -40 °C to +85 °C · Rail-to-rail · 1 pA · 5 mA · 1.2 µA per channel

가격 문의

데이터시트 보기 →

TS942ID

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 8-DIP
2 channels · 10 kHz · 0.0045 V/us · 2.5 V to 10 V · Up to 10 V · 1.2 uA · 1 pA · Rail-to-rail

가격 문의

데이터시트 보기 →

TS942AID

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 8-DIP
Dual operational amplifier · 2 · 2.5 V to 10 V · -40 °C to +85 °C · Rail-to-rail · 1 pA · 5 mA · 1.2 µA per channel

가격 문의

데이터시트 보기 →

TS942AID

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 8-DIP
Dual operational amplifier · 2 · 2.5 V to 10 V · -40 °C to +85 °C · Rail-to-rail · 1 pA · 5 mA · 1.2 µA per channel

가격 문의

데이터시트 보기 →

TS942AIN 최대 정격 & 전기적 특성

Number of Amplifiers 2 channels
Amplifier Type General-purpose operational amplifier
출력 유형 Rail-to-rail
Supply Voltage Range 2.5 V to 10 V
Quiescent Current per Channel 1.2 uA typical
Typical Output Current 5 mA
동작 온도 범위 -40 °C to +85 °C
패키지 8-DIP, 0.300 inch pitch, 7.62 mm
실장 유형 Through-hole
RoHS 상태 Compliant

TS942AIN 8-dip, 0.300 inch pitch, 7.62 mm 핀 구성 가이드

TS942AIN(8-dip, 0.300 inch pitch, 7.62 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

TS942AIN의 8-dip, 0.300 inch pitch, 7.62 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TS942AIN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TS942AIN 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Conditioning, Portable Industrial Monitoring, Low-Voltage Buffering, Current-Loop Interface, Medical Sensor Interface, Low-Power Data Acquisition.

🔋

Battery-Powered Sensor Conditioning

The TS942AIN is well suited to conditioning low-level sensor signals in battery-powered equipment because each amplifier channel draws approximately 1.2 uA at typical conditions. The dual configuration can amplify or buffer two related channels while operating from a supply between 2.5 V and 10 V. Rail-to-rail output behavior helps preserve signal swing in low-voltage systems. Designers should verify the input common-mode range, offset voltage, and noise against the sensor specification, then place the amplifier close to the source to minimize trace noise and parasitic loading.

🏭

Portable Industrial Monitoring

The TS942AIN can monitor slow analog signals in portable instrumentation where each channel’s approximately 1.2 uA supply current helps extend operating time. Its 2.5 V minimum supply supports compact sensor systems, while the -40 °C to +85 °C family rating covers a broad range of industrial environments. Use the dual amplifier for paired conditioning channels and confirm that the required gain, input common-mode range, and output accuracy fit the measurement chain. A stable local bypass capacitor and short analog traces are important in field environments with electrical noise.

📡

Low-Voltage Buffering

The TS942AIN can buffer low-voltage signals when the source impedance would make downstream loading unacceptable. Its dual general-purpose topology allows one channel to buffer a sensor and the other to support a second signal path. The 5 mA typical output current is suitable for moderate loads, while the rail-to-rail output stage increases available swing near the supply limits. Before implementation, verify the load capacitance, output stability, and exact output-voltage limits from the manufacturer electrical characteristics.

⚙️

Current-Loop Interface

The low-power dual TS942AIN can support the input and output stages of a low-voltage current-loop interface when the loop bandwidth is within the amplifier’s capability. Its 2.5 V to 10 V operating range suits compact process-control electronics, and the rail-to-rail output helps drive the required current within the available supply headroom. The design must confirm input bias current, offset, gain-bandwidth, common-mode range, and load capability in the manufacturer datasheet. Decouple the supply near the IC and keep feedback components away from switching traces.

💊

Medical Sensor Interface

The TS942AIN can serve as a low-power amplifier in a medical sensor interface when its input offset, noise, bias current, and common-mode performance meet the measurement requirements. Its dual channels support paired sensing or buffering, and the approximately 1.2 uA per-channel supply current limits battery drain. The 2.5 V to 10 V supply range accommodates compact acquisition systems. Because safety-critical medical designs require application-specific validation, engineers should compare the complete electrical limits, isolation strategy, and leakage requirements before integrating the device into patient-contact circuitry.

🖥️

Low-Power Data Acquisition

A TS942AIN-based front end can amplify or buffer two channels in a compact, low-power data-acquisition system. The dual configuration reduces the component count compared with separate single amplifiers, while the 2.5 V minimum operating voltage supports low-voltage sensors. Its typical 1.2 uA per-channel supply current is advantageous for long-duration acquisition, provided the selected sample rate is compatible with the amplifier bandwidth. Check input bias current for high-impedance sources, use short guarded traces, and ensure the output stage remains stable with the ADC sampling network.

What is the TS942AIN?
The TS942AIN is a dual general-purpose operational amplifier with rail-to-rail output capability, low power consumption, and an 8-pin Mini DIP package. According to the STMicroelectronics TS94x product page, the family operates from 2.5 V to 10 V over a -40 °C to +85 °C temperature range, making it suitable for low-voltage analog signal-conditioning designs.
What is the operating voltage range of TS942AIN?
The TS942AIN operates from 2.5 V to 10 V. According to the STMicroelectronics TS94x product page, this supply range supports low-voltage systems using 3.3 V or 5 V rails as well as higher-voltage analog circuits operating below 10 V. The exact absolute maximum and recommended supply limits should be checked in the manufacturer datasheet.
How much current does the TS942AIN consume?
The TS942AIN uses approximately 1.2 uA of supply current per channel, according to the manufacturer family description. For two active channels, the listed per-channel value corresponds to approximately 2.4 uA before considering additional application-specific effects. This micropower operating point is especially useful in battery-powered sensor and monitoring equipment.
Where can I download the TS942AIN datasheet PDF?
The official TS942AIN technical information is available through the STMicroelectronics TS94x product page at https://www.st.com/en/amplifiers-and-comparators/ts942.html. The page links to manufacturer documentation and presents the TS942AIN as a dual rail-to-rail micropower operational amplifier in an 8-pin Mini DIP package. Use the manufacturer document for the authoritative pinout and electrical limits.
Where can I find the TS942AIN pinout?
The TS942AIN pinout is shown in the manufacturer datasheet for the 8-pin Mini DIP configuration. The verified product information identifies an 8-DIP package with 7.62 mm pitch, but it does not reproduce the numbered pin descriptions. Before assigning PCB tracks, use the pin-description table and package drawing in the STMicroelectronics TS942 documentation.
Is TS942AIN suitable for battery-powered sensor circuits?
Yes, the TS942AIN is suitable for many battery-powered sensor circuits because its typical supply current is approximately 1.2 uA per channel and its operating range starts at 2.5 V. The dual configuration can process two analog signals when channel count and board space permit. The complete input bias current, offset, and noise specifications should be compared with the sensor accuracy requirement.
What can replace the TS942AIN?
A replacement must match the TS942AIN’s 8-pin Mini DIP footprint, pin functions, supply range, rail-to-rail output behavior, and low-power requirements. The cross-reference search identified the TS94x family as the closest same-manufacturer source, but it did not establish five verified drop-in alternatives. A candidate should therefore be checked against the manufacturer pinout and electrical tables before substitution is approved.
What is the best drop-in replacement for TS942AIN?
The best drop-in replacement is the device with an identical 8-pin Mini DIP pinout and electrical performance closest to the TS942AIN, including the 2.5 V to 10 V supply range, approximately 1.2 uA per-channel supply current, and rail-to-rail output. The available cross-reference material identifies the TS94x family but does not confirm a specific cross-manufacturer drop-in part, so board-level substitution requires datasheet verification.
TS942AIN vs TS942A: which one should be selected?
The TS942AIN is the identified orderable device in the verified listings, while the TS942A family ordering variants differ in their suffix codes. The available family information confirms a dual rail-to-rail micropower amplifier and an 8-DIP format, but it does not provide a complete suffix-by-suffix comparison. Check the manufacturer ordering table for temperature grade, packing option, and exact pin configuration.
When should I choose the TS942AIN over a conventional dual op amp?
Choose the TS942AIN when the design needs a dual amplifier operating from 2.5 V to 10 V with approximately 1.2 uA supply current per channel and rail-to-rail output behavior. A conventional dual op amp may offer broader bandwidth or precision, but generally consumes more current. The choice depends on the required signal bandwidth, offset, noise, and load capability.
Is TS942AIN suitable for low-voltage instrumentation?
Yes, the TS942AIN fits low-voltage instrumentation where a 2.5 V minimum supply and low quiescent current are important. Its dual channels can provide gain or buffering around sensor outputs, and rail-to-rail output improves available signal swing. The input common-mode range, offset voltage, noise, and gain-bandwidth figures must satisfy the measurement accuracy and bandwidth requirements.
How should I design the TS942AIN power supply bypassing?
Place a local bypass capacitor at the TS942AIN supply pins and connect it to a low-impedance ground reference close to the device. Keep the supply and ground paths short so switching-current loops do not share traces with sensitive input signals. The manufacturer datasheet should define the recommended bypass capacitance; the exact value must be confirmed before PCB release.
Does the TS942AIN need a heatsink?
No external heatsink is normally expected for the TS942AIN because it is a low-power micropower operational amplifier. Its typical supply current is approximately 1.2 uA per channel, so internal dissipation is very low in ordinary signal-conditioning applications. PCB thermal performance should still be checked when the device operates near its maximum supply voltage with unusual loads.
What is the lifecycle status of TS942AIN?
The TS942AIN is treated as obsolete for this product record because current distributor search material identifies it as obsolete stock. The STMicroelectronics family page remains the appropriate starting point for technical information and related orderable variants. Confirm availability, lifecycle status, and any supported migration path through the Request a Quote form on this page.
Where can I buy TS942AIN and check its price and lead time?
Use the Request a Quote form on this page to request the current TS942AIN price, stock position, minimum order quantity, and lead time. The device is an obsolete catalog part, so availability may be limited and may consist of surplus or legacy inventory. The Request a Quote workflow is the appropriate channel for a firm quotation and current delivery information.

엔지니어링 참조 데이터: TS942AIN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TS942AIN when a new or replacement design requires a dual, general-purpose operational amplifier with rail-to-rail output, approximately 1.2 uA supply current per channel, and operation from 2.5 V to 10 V. Its 8-DIP package is particularly convenient for through-hole assemblies and prototypes where a surface-mount package is unnecessary. Choose TS942A, TS942AI, TS942, or TS942AID only after confirming the exact suffix, temperature grade, packing method, and current production status. For higher-bandwidth, lower-offset, lower-noise, or higher-current designs, compare the TS942AIN against LM324NSR, LM2902N/PB, or another qualified dual amplifier rather than assuming family equivalence. Because the TS942AIN is obsolete, obtain a quotation and lifecycle confirmation before committing new production quantities.

대체품과의 비교

파라미터 이 제품 TS942A TS942AI TS942 TS942AID
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-DIP 8-DIP 8-DIP 8-DIP 8-DIP
Number of Amplifiers 2 channels 2 channels 2 channels 2 channels 2 channels
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Supply Voltage Range 2.5 V to 10 V 2.5 V to 10 V 2.5 V to 10 V 2.5 V to 10 V 2.5 V to 10 V
Supply Current per Channel 1.2 uA typical 1.2 uA typical 1.2 uA typical 1.2 uA typical 1.2 uA typical
Output Configuration Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Typical Output Current 5 mA 5 mA 5 mA 5 mA 5 mA
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

주요 차별점

  • Very low dual-channel supply current (vs LM324NSR)
  • Low-voltage rail-to-rail output operation (vs TS942A)
  • Compact eight-pin through-hole integration (vs TS942AI)
  • Broad family temperature capability (vs TS942AID)

설계 노트

Place the TS942AIN close to the sensor or signal source to minimize capacitive loading and susceptibility to induced noise. Keep input and feedback traces short, avoid routing them parallel to switching-conductor paths, and provide a quiet ground return. Use a local bypass capacitor at the supply pins, with its ground connection routed directly to the device ground area. The manufacturer datasheet should be used to select the final capacitor value.

Design the supply around the confirmed 2.5 V to 10 V operating range and the approximately 1.2 uA per-channel supply current. Check startup behavior, output validity, and load current rather than assuming that low quiescent current guarantees low total system consumption. External pull-ups, bias networks, ADC inputs, and external loads can dominate the power budget and must be included in the complete current calculation.

Do not assume that a rail-to-rail output implies rail-to-rail input operation. Verify the input common-mode range, output swing, input bias current, offset voltage, noise, and stability with capacitive loading before finalizing the schematic. For high-impedance sources, account for bias-current-induced error and leakage from PCB contamination. A conventional dual amplifier such as LM324NSR may offer different accuracy or bandwidth characteristics.

For sensor signals with slow bandwidth but poor common-mode margin, evaluate offset and drift over the full -40 °C to +85 °C operating range. The TS942AIN is a general-purpose micropower amplifier, so its dynamic performance may not suit precision or high-bandwidth instrumentation. Confirm the unity-gain bandwidth, slew rate, noise density, and load stability before choosing it for a fast acquisition channel.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS compliance is identified in the manufacturer-family and distributor search information. No verified REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for this exact orderable device.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TS942AIN datasheet TS942AIN specifications TS942AIN pinout TS942AIN datasheet pdf STMicroelectronics TS942AIN TS942AIN 8-DIP TS942AIN 2.5V 10V TS942AIN micropower op amp TS942AIN sensor circuit TS942AIN equivalent TS942AIN replacement TS942AIN vs LM324NSR TS942AIN price TS942AIN stock Where to buy TS942AIN

관련 부품 & 용어

STMicroelectronics TS942AIN TS942A TS942AI TS942 TS942AID TS94x LM324NSR LM2902N/PB operational amplifier dual operational amplifier general-purpose amplifier analog amplifier signal-conditioning IC rail-to-rail output micropower amplifier low-dropout regulator semiconductor 8-DIP Mini DIP through-hole package 2.5 V minimum supply 10 V maximum supply 1.2 uA supply current 5 mA output current -40 °C to +85 °C
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기