TUSB3410VFG4 - USB to UART Bridge | Texas Instruments
부품 번호: TUSB3410VFG4 ✓ 활성TUSB3410VFG4 개요
A USB-to-UART bridge is an interface IC that translates USB data transactions into a conventional asynchronous serial stream. It eliminates the need for a separate USB controller when an embedded system needs a PC-compatible RS-232, IrDA, or other UART endpoint. The TUSB3410 occupies the interface-controller level of the hierarchy: USB interface controller, serial bridge, peripheral interface IC, and ultimately an embedded connectivity solution.
The TUSB3410VFG4 integrates an 8052-compatible microcontroller core with 10 KB of ROM, 16 KB of RAM, and an I2C interface. Its boot ROM configures the USB connection and contains an I2C bootloader, while application firmware can be loaded from the host or from external onboard memory through I2C. This architecture is useful when a product needs more behavior than a fixed hardware USB-to-serial converter can provide.
Important electrical characteristics include a 3.3 V operating supply, full-speed USB 2.0 operation, and a 32-lead gull-wing LQFP package. The G4 suffix identifies a specific ordering configuration, while the VF ordering code identifies the square LQFP package. The package is designed for surface-mount assembly and provides a practical pin count for systems requiring parallel UART control, USB data, I2C, and support signals.
Typical uses include legacy RS-232 equipment interfaces, industrial serial adapters, point-of-sale terminals, security equipment, and embedded systems that need a programmable USB serial endpoint. Compared with simple fixed-function USB-to-UART converters, the integrated processor and downloadable firmware allow application-specific behavior, additional GPIO control, and custom boot or configuration sequences.
Plan the PCB around the 32-pin LQFP footprint and keep USB D+ and D- routing short and impedance-controlled. Follow the pin-description and layout guidance in the manufacturer datasheet when assigning power, ground, crystal, UART, and I2C nets. This page also organizes package, application, and comparison information to support sourcing and design decisions that are not consolidated in a single manufacturer document.
드롭인 대체품: TUSB3410VFG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TUSB3410VFG4 (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range, Auxiliary Interface, Device Type, Package Type, Serial Interfaces.
TUSB3410VF
✅ 드롭인가격 문의
데이터시트 보기 →TUSB3410IVF
✅ 드롭인가격 문의
데이터시트 보기 →TUSB3410VFG4 사양
| Product Type | USB to UART serial-port controller |
| 공급 전압 | 3.3 V |
| USB Version | USB 2.0 full-speed |
| Processor Core | 8052 microcontroller unit |
| Internal ROM | 10 KB |
| Internal RAM | 16 KB |
| Bootloader | I2C bootloader in ROM |
| Host Firmware Loading | Supported from host or external onboard memory through I2C |
| Serial Interfaces | Enhanced UART, RS-232, and IrDA |
| Auxiliary Interface | I2C |
| 동작 온도 범위 | 0 °C to 70 °C |
| Temperature Grade | Commercial |
| Package Type | 32-pin LQFP |
| Terminal Count | 32 |
| Terminal Form | Gull wing |
| Package Shape | Square |
| 실장 유형 | Surface mount |
| Evaluation Support | TUSB3410 general-purpose I/O evaluation board |
TUSB3410VFG4 square 핀 구성 가이드
TUSB3410VFG4(square 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: TUSB3410VFG4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TUSB3410VFG4 적합 용도: 6 애플리케이션s: Legacy RS-232 Equipment Interface, Industrial USB Serial Adapter, Point-of-Sale Terminal Connectivity, Security and Access-Control Peripherals, Programmable USB-to-Serial Gateway, IrDA-Equipped Data Collection Device.
Legacy RS-232 Equipment Interface
The TUSB3410VFG4 connects a USB host to legacy equipment that exposes an enhanced UART or RS-232 interface. Its 8052 core, 10 KB ROM, and 16 KB RAM allow the bridge to support boot configuration and downloadable application firmware rather than acting as a completely fixed converter. The 32-LQFP package provides separate access to USB, UART, I2C, and control signals. For reliable operation, route USB D+ and D- as a controlled-impedance pair, provide the required USB transceiver support components, and verify the external interface levels against the connected equipment rather than assuming a direct RS-232 connection.
추천
Industrial USB Serial Adapter
The TUSB3410VFG4 suits compact industrial adapters that need a programmable USB-to-serial endpoint for configuration tools, service ports, or field diagnostics. Its 3.3 V supply and full-speed USB 2.0 operation fit modern USB peripheral designs, while the integrated I2C bootloader provides a controlled path for firmware loading. The commercial 0 °C to 70 °C grade covers many indoor and controlled-enclosure installations; use an extended-temperature variant when the enclosure experiences wider temperature swings. Follow the manufacturer layout guidance to minimize radiated USB emissions and maintain signal integrity through the connector and cable interface.
추천
Point-of-Sale Terminal Connectivity
The TUSB3410VFG4 can bridge a point-of-sale terminal or peripheral controller to a PC over USB while exposing UART-based service or data functions. Its internal 8052 processor and downloadable firmware provide more implementation flexibility than a basic hardware-only USB-to-UART converter, which is useful when a vendor requires custom enumeration behavior, control signaling, or an application-specific boot sequence. The device also supports IrDA, enabling short-range optical communication with compatible equipment. Validate the host driver, enumeration sequence, baud-rate handling, and cable shielding in the final enclosure, because firmware and mechanical choices can affect the user experience.
추천
Security and Access-Control Peripherals
The TUSB3410VFG4 is appropriate for USB-connected access-control, security, and monitoring peripherals that need an embedded serial bridge with application firmware. Its internal 8052 core and 16 KB of RAM support device-specific logic, while I2C provides access to external memory or sensors. The commercial temperature range covers many indoor terminals, and the 32-LQFP package simplifies assembly in multi-function controller boards. Firmware should handle enumeration, watchdog behavior, serial framing, and connector faults. Confirm driver support on the target operating system and validate the complete USB and serial interface against the intended security hardware.
추천
Programmable USB-to-Serial Gateway
The TUSB3410VFG4 fits gateway products that must present a programmable serial endpoint to a USB host while coordinating UART traffic with other on-board subsystems. Its ROM-based USB boot configuration, I2C bootloader, and host or external-memory firmware-loading capability separate device configuration from the final application. This makes it useful when protocol behavior, control outputs, or boot-time checks must be customized without redesigning the host interface. Use the I2C bus only after checking address allocation and pull-up requirements in the datasheet, and keep firmware updates recoverable if the application interrupts normal enumeration.
추천
IrDA-Equipped Data Collection Device
The TUSB3410VFG4 can combine a USB host connection with IrDA short-range optical communication through its integrated serial interface functions. This combination suits bench instruments and data-collection devices that store or exchange information locally and then connect to a computer for configuration. The 8052 core allows application-specific framing and control, and the 10 KB ROM provides a known boot path for USB configuration. Validate IrDA transceiver selection, optical timing, modulation, and supported data rates separately from the USB side. Also confirm that the final host software expects the same serial framing and handshaking behavior implemented by the loaded firmware.
추천
추천 제품 요약
엔지니어링 참조 데이터: TUSB3410VFG4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TUSB3410VF | TUSB3410IVF |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 32-LQFP | 32-LQFP - same package | 32-LQFP - same package |
| Product Type | USB to UART, I2C, and IrDA serial-port controller | USB to UART, I2C, and IrDA serial-port controller | USB to UART, I2C, and IrDA serial-port controller |
| Supply Voltage | 3.3 V | 3 V nominal supply, up to 3.6 V maximum | 3 V nominal supply, up to 3.6 V maximum |
| USB Interface | USB 2.0 full-speed | USB 2.0 full-speed | USB 2.0 full-speed |
| Processor Core | 8052 microcontroller unit | 8052 microcontroller unit | 8052 microcontroller unit |
| Internal ROM | 10 KB | 10 KB | 10 KB |
| Internal RAM | 16 KB | 16 KB | 16 KB |
| Operating Temperature Range | 0 °C to 70 °C | 0 °C to 70 °C | -40 °C to 85 °C |
| Temperature Grade | Commercial | Commercial | Industrial |
| Firmware Bootloader | I2C bootloader in ROM | I2C bootloader in ROM | I2C bootloader in ROM |
주요 차별점
- Programmable bridge behavior rather than a fixed hardware-only converter (vs TUSB3410VF)
- Commercial-grade ordering configuration (vs TUSB3410IVF)
- Multiple serial and configuration functions in one interface IC (vs TUSB3410VF)
설계 노트
Route the USB D+ and D- connection as a length-matched, controlled-impedance pair and keep the pair away from UART edges, crystal circuitry, and switching-supply traces. Follow the USB transceiver and capacitor placement in the manufacturer application guidance rather than treating the bridge as a conventional low-speed UART device. A short connection from the interface pins through the USB connector reduces radiated emissions and improves enumeration reliability.
Decouple the 3.3 V supply close to the device pins and follow the manufacturer capacitance recommendations. The TUSB3410 is an interface IC rather than a linear regulator, so its supply rail must be generated and conditioned upstream. Confirm the operating range against the 3 V nominal and 3.6 V maximum information, and keep analog and digital return currents separated where the board architecture permits.
Do not treat a generic USB-to-UART converter as a pin-compatible substitute. The TUSB3410 includes an 8052 core and a firmware-based boot architecture, so board changes may also require different host-side behavior. Before releasing an alternative, verify the LQFP land pattern, pin mapping, clock implementation, I2C bus arrangement, firmware-loading flow, and supported operating-system driver.
규정 준수 정보
The device is an interface controller and is not identified as an AEC-Q100 automotive-qualified part. Compliance status not stated in the available manufacturer and distributor records and therefore remains unknown.