Texas Instruments

TUSB3410VFG4 - USB to UART Bridge | Texas Instruments

N.º da peça: TUSB3410VFG4 ✓ Ativo
3.3 V Vdss 32-pin LQFP Package 10 KB Memory
MOQ: 1 |

TUSB3410VFG4 Visão geral

The Texas Instruments TUSB3410VFG4 is a full-speed USB 2.0 serial-port controller that bridges a USB host to an enhanced UART, with I2C and IrDA support, in a 32-pin LQFP package. The device operates from a 3.3 V supply, includes 10 KB of internal ROM and 16 KB of RAM, and provides the hardware and firmware foundation for USB-to-serial peripheral connectivity. Its commercial-grade temperature range is 0 °C to 70 °C.

A USB-to-UART bridge is an interface IC that translates USB data transactions into a conventional asynchronous serial stream. It eliminates the need for a separate USB controller when an embedded system needs a PC-compatible RS-232, IrDA, or other UART endpoint. The TUSB3410 occupies the interface-controller level of the hierarchy: USB interface controller, serial bridge, peripheral interface IC, and ultimately an embedded connectivity solution.

The TUSB3410VFG4 integrates an 8052-compatible microcontroller core with 10 KB of ROM, 16 KB of RAM, and an I2C interface. Its boot ROM configures the USB connection and contains an I2C bootloader, while application firmware can be loaded from the host or from external onboard memory through I2C. This architecture is useful when a product needs more behavior than a fixed hardware USB-to-serial converter can provide.

Important electrical characteristics include a 3.3 V operating supply, full-speed USB 2.0 operation, and a 32-lead gull-wing LQFP package. The G4 suffix identifies a specific ordering configuration, while the VF ordering code identifies the square LQFP package. The package is designed for surface-mount assembly and provides a practical pin count for systems requiring parallel UART control, USB data, I2C, and support signals.

Typical uses include legacy RS-232 equipment interfaces, industrial serial adapters, point-of-sale terminals, security equipment, and embedded systems that need a programmable USB serial endpoint. Compared with simple fixed-function USB-to-UART converters, the integrated processor and downloadable firmware allow application-specific behavior, additional GPIO control, and custom boot or configuration sequences.

Plan the PCB around the 32-pin LQFP footprint and keep USB D+ and D- routing short and impedance-controlled. Follow the pin-description and layout guidance in the manufacturer datasheet when assigning power, ground, crystal, UART, and I2C nets. This page also organizes package, application, and comparison information to support sourcing and design decisions that are not consolidated in a single manufacturer document.

Alternativas drop-in para TUSB3410VFG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TUSB3410VFG4 (mesmo formato e footprint) — diferindo em Operating Temperature Range, Auxiliary Interface, Device Type, Package Type, Serial Interfaces.

Texas Instruments
Operating Temperature Range: -40°C to +85°C
Device Type: USB to UART bridge controller
Package Type: LQFP (VF)
Comparar com TUSB3410VFG4 →
Texas Instruments
Operating Temperature Range: 0°C to 70°C
Auxiliary Interface: I2C and IrDA
Device Type: USB to UART serial-port controller
Comparar com TUSB3410VFG4 →

TUSB3410VF

✅ Drop-In
Texas Instruments
📦 32-LQFP
USB to UART serial-port controller · USB 2.0 full-speed · Enhanced UART · I2C and IrDA · 3 V to 3.6 V · 0°C to 70°C · 10 kB · 32-pin LQFP (VF)

Consulte o preço

Ver ficha técnica →

TUSB3410IVF

✅ Drop-In
Texas Instruments
📦 32-LQFP
USB to UART bridge controller · 8052 · 10 kB · UART, I2C, and IrDA · USB serial port controller · 3 V to 3.6 V · -40°C to +85°C · Industrial

Consulte o preço

Ver ficha técnica →

TUSB3410VFG4 Especificações

Product Type USB to UART serial-port controller
Tensão de alimentação 3.3 V
USB Version USB 2.0 full-speed
Processor Core 8052 microcontroller unit
Internal ROM 10 KB
Internal RAM 16 KB
Bootloader I2C bootloader in ROM
Host Firmware Loading Supported from host or external onboard memory through I2C
Serial Interfaces Enhanced UART, RS-232, and IrDA
Auxiliary Interface I2C
Faixa de temperatura de operação 0 °C to 70 °C
Temperature Grade Commercial
Package Type 32-pin LQFP
Terminal Count 32
Terminal Form Gull wing
Package Shape Square
Tipo de montagem Surface mount
Evaluation Support TUSB3410 general-purpose I/O evaluation board

Guia de Configuração de Pinos do TUSB3410VFG4 square

Configuração de pinos para TUSB3410VFG4 (pacote square). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote square para TUSB3410VFG4

Nenhum dado detalhado de pinagem disponível para TUSB3410VFG4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TUSB3410VFG4 é adequado para 6 aplicaçãos: Legacy RS-232 Equipment Interface, Industrial USB Serial Adapter, Point-of-Sale Terminal Connectivity, Security and Access-Control Peripherals, Programmable USB-to-Serial Gateway, IrDA-Equipped Data Collection Device.

🖥️

Legacy RS-232 Equipment Interface

The TUSB3410VFG4 connects a USB host to legacy equipment that exposes an enhanced UART or RS-232 interface. Its 8052 core, 10 KB ROM, and 16 KB RAM allow the bridge to support boot configuration and downloadable application firmware rather than acting as a completely fixed converter. The 32-LQFP package provides separate access to USB, UART, I2C, and control signals. For reliable operation, route USB D+ and D- as a controlled-impedance pair, provide the required USB transceiver support components, and verify the external interface levels against the connected equipment rather than assuming a direct RS-232 connection.

🏭

Industrial USB Serial Adapter

The TUSB3410VFG4 suits compact industrial adapters that need a programmable USB-to-serial endpoint for configuration tools, service ports, or field diagnostics. Its 3.3 V supply and full-speed USB 2.0 operation fit modern USB peripheral designs, while the integrated I2C bootloader provides a controlled path for firmware loading. The commercial 0 °C to 70 °C grade covers many indoor and controlled-enclosure installations; use an extended-temperature variant when the enclosure experiences wider temperature swings. Follow the manufacturer layout guidance to minimize radiated USB emissions and maintain signal integrity through the connector and cable interface.

🖥️

Point-of-Sale Terminal Connectivity

The TUSB3410VFG4 can bridge a point-of-sale terminal or peripheral controller to a PC over USB while exposing UART-based service or data functions. Its internal 8052 processor and downloadable firmware provide more implementation flexibility than a basic hardware-only USB-to-UART converter, which is useful when a vendor requires custom enumeration behavior, control signaling, or an application-specific boot sequence. The device also supports IrDA, enabling short-range optical communication with compatible equipment. Validate the host driver, enumeration sequence, baud-rate handling, and cable shielding in the final enclosure, because firmware and mechanical choices can affect the user experience.

🔒

Security and Access-Control Peripherals

The TUSB3410VFG4 is appropriate for USB-connected access-control, security, and monitoring peripherals that need an embedded serial bridge with application firmware. Its internal 8052 core and 16 KB of RAM support device-specific logic, while I2C provides access to external memory or sensors. The commercial temperature range covers many indoor terminals, and the 32-LQFP package simplifies assembly in multi-function controller boards. Firmware should handle enumeration, watchdog behavior, serial framing, and connector faults. Confirm driver support on the target operating system and validate the complete USB and serial interface against the intended security hardware.

🌐

Programmable USB-to-Serial Gateway

The TUSB3410VFG4 fits gateway products that must present a programmable serial endpoint to a USB host while coordinating UART traffic with other on-board subsystems. Its ROM-based USB boot configuration, I2C bootloader, and host or external-memory firmware-loading capability separate device configuration from the final application. This makes it useful when protocol behavior, control outputs, or boot-time checks must be customized without redesigning the host interface. Use the I2C bus only after checking address allocation and pull-up requirements in the datasheet, and keep firmware updates recoverable if the application interrupts normal enumeration.

🧩

IrDA-Equipped Data Collection Device

The TUSB3410VFG4 can combine a USB host connection with IrDA short-range optical communication through its integrated serial interface functions. This combination suits bench instruments and data-collection devices that store or exchange information locally and then connect to a computer for configuration. The 8052 core allows application-specific framing and control, and the 10 KB ROM provides a known boot path for USB configuration. Validate IrDA transceiver selection, optical timing, modulation, and supported data rates separately from the USB side. Also confirm that the final host software expects the same serial framing and handshaking behavior implemented by the loaded firmware.

What is the TUSB3410VFG4 used for?
The TUSB3410VFG4 is used to connect a USB host to an enhanced UART, RS-232, or IrDA serial interface. Texas Instruments describes it as a UART, I2C, and IrDA serial-port-to-USB bridge. Its integrated 8052 core, 10 KB ROM, and 16 KB RAM support boot configuration and application firmware, making it more flexible than a fixed-function USB-to-serial converter.
What are the key specifications of TUSB3410VFG4 that engineers should know?
The TUSB3410VFG4 is a 3.3 V, full-speed USB 2.0 interface controller in a 32-pin LQFP package. It integrates an 8052 microcontroller with 10 KB of ROM and 16 KB of RAM, plus UART, IrDA, and I2C interfaces. According to the manufacturer product page, the ROM configures USB at boot and includes an I2C bootloader for loading firmware from a host or external onboard memory.
Is TUSB3410VFG4 the same as TUSB3410VF?
The TUSB3410VFG4 and TUSB3410VF use the same 32-pin LQFP device configuration and are identified as package and function compatible in comparison listings. The G4 suffix distinguishes the TUSB3410VFG4 ordering configuration from TUSB3410VF. Confirm the exact temperature grade and ordering details against the current manufacturer part table before substituting one MPN for another in a released design.
What is the difference between TUSB3410VFG4 and TUSB3410IVF?
The primary documented difference is the operating temperature grade: TUSB3410VFG4 is commercial grade from 0 °C to 70 °C, while TUSB3410IVF is specified from -40 °C to 85 °C according to component comparison data. Both use a 32-pin LQFP package and belong to the same TUSB3410 family, so the industrial-grade TUSB3410IVF is the closer choice when extended-temperature operation is required.
Can TUSB3410VFG4 replace an FT232RL or CP2105?
The TUSB3410VFG4 can perform a USB-to-UART bridging function, but it is not automatically a pin-for-pin replacement for an FT232RL or CP2105. The TUSB3410 uses an internal 8052 core with firmware-based configuration, while fixed-function converters use different hardware and pin arrangements. A board redesign is required unless the original design was specifically laid out for the TUSB3410 footprint and signal mapping.
What is the best drop-in replacement for TUSB3410VFG4?
The closest documented same-family drop-in choices are TUSB3410VF and TUSB3410IVF because both use the same 32-pin LQFP package and equivalent serial-bridge functions. TUSB3410VF matches the commercial temperature grade most closely, while TUSB3410IVF extends the temperature range to -40 °C to 85 °C. Review the manufacturer ordering table and firmware requirements before production substitution.
When should I choose TUSB3410IVF instead of TUSB3410VFG4?
Choose TUSB3410IVF when the product must operate across an extended industrial temperature range rather than the TUSB3410VFG4 commercial range of 0 °C to 70 °C. Both parts retain the 32-pin LQFP package and the same core USB-to-UART architecture. For room-temperature commercial equipment, TUSB3410VF or TUSB3410VFG4 generally align more closely with the original operating grade.
Is TUSB3410VFG4 suitable for industrial control and IoT equipment?
The TUSB3410VFG4 is suitable for industrial and IoT equipment that operates within its 0 °C to 70 °C commercial temperature range and requires a programmable USB serial interface. Its 8052 core, downloadable firmware, I2C bootloader, and enhanced UART make it useful for customized adapters and legacy serial connectivity. Select the industrial-grade family variant when the enclosure temperature can fall outside the commercial limits.
Where can I download the TUSB3410VFG4 datasheet PDF?
The official TUSB3410 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tusb3410.pdf. It contains the device description, electrical characteristics, pin descriptions, application information, and firmware considerations for the family. The manufacturer product page at https://www.ti.com/product/TUSB3410 provides ordering information and additional support resources.
Where can I find the TUSB3410VFG4 pinout?
The TUSB3410VFG4 pinout and pin descriptions are published in the Pin Configuration and Pin Functions sections of the Texas Instruments TUSB3410 datasheet. The device uses a 32-pin square LQFP package with gull-wing leads. Use the manufacturer pin table when assigning PCB nets, and check the package drawings for lead dimensions and land-pattern guidance.
How much RAM and ROM does the TUSB3410VFG4 contain?
The TUSB3410VFG4 contains 10 KB of ROM and 16 KB of RAM. Texas Instruments states that the ROM code configures the USB port during boot and includes an I2C bootloader. Application firmware can be loaded by the host or from external onboard memory through I2C, so available RAM and bootloader behavior should be considered when planning firmware updates.
Does the TUSB3410VFG4 support IrDA and I2C?
Yes, the TUSB3410VFG4 supports enhanced UART, IrDA, and I2C functions. According to the Texas Instruments product page, the device bridges USB to an enhanced UART serial port, while its I2C interface provides a path for host or external-memory firmware loading and for connected peripheral functions. The complete mode and electrical configuration must follow the datasheet pin and timing requirements.
What is the lead time for TUSB3410VFG4?
Request the current lead time, minimum order quantity, and available packaging through the Request a Quote form on this page. Lead time can vary with order volume, manufacturing status, and replenishment conditions, so confirm the confirmed delivery schedule at the time of quotation rather than relying on a historical listing.
Where can I buy TUSB3410VFG4 online?
Use the Request a Quote form on this page to request TUSB3410VFG4 pricing, stock confirmation, and delivery scheduling. The component is listed as a Texas Instruments 32-LQFP USB serial-port controller with 10 KB ROM. The quote request lets the order be matched against the required package configuration and current manufacturing supply.
What is the price of TUSB3410VFG4?
Request current TUSB3410VFG4 pricing through the Request a Quote form on this page. Pricing depends on order quantity, chosen shipping method, market availability, and the latest supplier cost. The structured listing records a current reference price, while the quotation form provides the live commercial figure for your specific order.
Is TUSB3410VFG4 in stock?
Stock availability for TUSB3410VFG4 changes with order volume and replenishment cycles. Submit a stock and lead-time request through the Request a Quote form on this page for an order-specific confirmation. For production planning, request the schedule for the complete quantity and any alternates rather than relying on a single unit-level availability indication.
What is the best cross-brand equivalent for TUSB3410VFG4?
No verified cross-brand, pin-to-pin equivalent for the TUSB3410VFG4 was identified in the available cross-reference records. USB-to-UART bridges from other manufacturers often use different packages, pin assignments, and firmware architectures, so they are not drop-in replacements. Treat devices such as the FT232RL or CP2105 as redesign candidates rather than direct substitutes, and use the manufacturer comparison resources to evaluate functional alternatives.

Dados de referência de engenharia para TUSB3410VFG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TUSB3410VFG4 when an embedded product needs a 3.3 V USB-to-serial bridge with enhanced UART, IrDA, and I2C support, and when downloadable application firmware is valuable. Its 8052 core and I2C bootloader make it appropriate for customized adapters, legacy equipment interfaces, and industrial serial gateways operating within the 0 °C to 70 °C commercial temperature range. Select TUSB3410IVF when the same package and core functionality are needed but the product must operate from -40 °C to 85 °C. TUSB3410VF is the closest family configuration for package-identical commercial designs. Cross-brand USB-to-serial devices should be treated as functional alternatives rather than drop-in replacements because their packages, signal assignments, processors, and firmware-loading methods commonly differ. Validate host-driver support and the complete board-level interface before production release.

Comparação com alternativas

Parâmetro Este produto TUSB3410VF TUSB3410IVF
Brand Texas Instruments Texas Instruments Texas Instruments
Package 32-LQFP 32-LQFP - same package 32-LQFP - same package
Product Type USB to UART, I2C, and IrDA serial-port controller USB to UART, I2C, and IrDA serial-port controller USB to UART, I2C, and IrDA serial-port controller
Supply Voltage 3.3 V 3 V nominal supply, up to 3.6 V maximum 3 V nominal supply, up to 3.6 V maximum
USB Interface USB 2.0 full-speed USB 2.0 full-speed USB 2.0 full-speed
Processor Core 8052 microcontroller unit 8052 microcontroller unit 8052 microcontroller unit
Internal ROM 10 KB 10 KB 10 KB
Internal RAM 16 KB 16 KB 16 KB
Operating Temperature Range 0 °C to 70 °C 0 °C to 70 °C -40 °C to 85 °C
Temperature Grade Commercial Commercial Industrial
Firmware Bootloader I2C bootloader in ROM I2C bootloader in ROM I2C bootloader in ROM

Principais diferenciais

  • Programmable bridge behavior rather than a fixed hardware-only converter (vs TUSB3410VF)
  • Commercial-grade ordering configuration (vs TUSB3410IVF)
  • Multiple serial and configuration functions in one interface IC (vs TUSB3410VF)

Notas de projeto

Route the USB D+ and D- connection as a length-matched, controlled-impedance pair and keep the pair away from UART edges, crystal circuitry, and switching-supply traces. Follow the USB transceiver and capacitor placement in the manufacturer application guidance rather than treating the bridge as a conventional low-speed UART device. A short connection from the interface pins through the USB connector reduces radiated emissions and improves enumeration reliability.

Decouple the 3.3 V supply close to the device pins and follow the manufacturer capacitance recommendations. The TUSB3410 is an interface IC rather than a linear regulator, so its supply rail must be generated and conditioned upstream. Confirm the operating range against the 3 V nominal and 3.6 V maximum information, and keep analog and digital return currents separated where the board architecture permits.

Do not treat a generic USB-to-UART converter as a pin-compatible substitute. The TUSB3410 includes an 8052 core and a firmware-based boot architecture, so board changes may also require different host-side behavior. Before releasing an alternative, verify the LQFP land pattern, pin mapping, clock implementation, I2C bus arrangement, firmware-loading flow, and supported operating-system driver.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is an interface controller and is not identified as an AEC-Q100 automotive-qualified part. Compliance status not stated in the available manufacturer and distributor records and therefore remains unknown.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TUSB3410VFG4 datasheet TUSB3410VFG4 datasheet pdf TUSB3410VFG4 pinout TUSB3410VFG4 specifications Texas Instruments TUSB3410VFG4 TUSB3410VFG4 32-LQFP TUSB3410VFG4 USB to UART bridge TUSB3410VFG4 IrDA I2C interface TUSB3410VFG4 vs TUSB3410IVF TUSB3410VFG4 equivalent TUSB3410VFG4 drop-in replacement TUSB3410VFG4 price TUSB3410VFG4 stock TUSB3410VFG4 firmware loading

Componentes & termos relacionados

Texas Instruments TUSB3410VFG4 TUSB3410VF TUSB3410IVF USB-to-UART bridge USB serial-port controller interface IC 8052 microcontroller 10 KB ROM 16 KB RAM I2C bootloader I2C IrDA enhanced UART RS-232 USB 2.0 full-speed 3.3 V 32-LQFP LQFP family surface-mount package gull-wing lead commercial temperature grade industrial temperature grade boot configuration Texas Instruments TUSB3410 evaluation board
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ