최종 구매 공지: TUSB6250PFC 단종에 가까워지고 있습니다. 최종 주문일: 문의하기. 사용 가능한 대체 부품 보기 →
Texas Instruments

TUSB6250PFC - USB 2.0 ATA/ATAPI Bridge | Texas Instruments

부품 번호: TUSB6250PFC ✗ 단종
3 V to 3.6 V Vdss 80-pin TQFP (PFC) Package
MOQ: 1 |

TUSB6250PFC 개요

Texas Instruments TUSB6250PFC is a USB 2.0 low-power, high-speed ATA/ATAPI bridge controller packaged in an 80-pin TQFP (PFC) measuring 12 x 12 mm. It provides 3 V to 3.6 V operation, 80 integrated pins, and a 0 °C to 70 °C commercial temperature range for compatible USB-to-ATA storage interface designs.

A USB-to-ATA/ATAPI bridge controller is an interface IC that translates USB host transactions into ATA commands understood by compatible storage devices. This controller family belongs to the broader USB interface-controller and storage-interface hierarchy, allowing equipment without a native ATA interface to communicate with legacy-compatible disk or optical-storage subsystems through USB 2.0.

The TUSB6250PFC is identified specifically as a low-power, high-speed USB 2.0 to ATA/ATAPI bridge solution. Its operating range of 3 V to 3.6 V supports integration with 3.3 V equipment, while the high-speed interface positioning makes it suitable for storage-oriented USB ports requiring greater throughput than a low-speed USB peripheral. The 80-pin TQFP (PFC) package provides a substantial number of interface, power, control, and ground connections.

The architecture separates USB-side signaling from ATA/ATAPI-side signaling so that a USB host can communicate through a standardized external interface while the bridge manages command translation and device-side control. This division of responsibilities permits reuse in USB storage appliances, legacy disk subsystems, and backup or archival equipment that originally relied on an ATA interface. USB bus powering and suspend behavior also make power management an important part of the implementation.

Typical applications include USB-connected storage appliances, external disk interfaces, network-attached storage controller boards, digital video recorders, backup appliances, and industrial data-acquisition systems with compatible legacy storage. Designers should confirm device support, USB enumeration behavior, power requirements, and signal compatibility before integrating the controller into a new system.

The primary design task is matching the TUSB6250PFC pin configuration, voltage rails, interface timing, and PCB land pattern exactly to the selected storage architecture. Keep USB and ATA/ATAPI traces routed according to the manufacturer layout guidance, provide the required bypass capacitors, and maintain solid ground-plane continuity to reduce data-integrity and emissions risks.

This product page combines the manufacturer interface definition, package and temperature details, drop-in replacement availability, comparison data, and practical PCB guidance. It helps engineers evaluate the TUSB6250PFC as a USB 2.0 ATA/ATAPI bridge while highlighting the electrical and footprint checks required for a successful design.

드롭인 대체품: TUSB6250PFC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

TUSB6250PFC 사양

Product Type USB 2.0 to ATA/ATAPI bridge controller
USB Interface USB 2.0
Storage-Side Interface ATA/ATAPI
Performance Class High-speed and low-power
Operating Voltage 3 V to 3.6 V
동작 온도 0 °C to 70 °C
패키지 80-pin TQFP (PFC)
Package Dimensions 12 x 12 mm
실장 유형 Surface mount
핀 수 80 pins
RoHS 상태 unknown
REACH Status unknown
Lead-Free Status unknown

TUSB6250PFC 12 x 12 mm 핀 구성 가이드

TUSB6250PFC(12 x 12 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

TUSB6250PFC의 12 x 12 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TUSB6250PFC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TUSB6250PFC 적합 용도: 6 애플리케이션s: USB Storage Appliance Bridge, External Legacy Disk Interface, Network-Attached Storage Interface Board, Digital Video Recorder Storage, Industrial Backup Appliance, Portable Media Maintenance System.

🖥️

USB Storage Appliance Bridge

The TUSB6250PFC fits a USB storage appliance that retains an ATA/ATAPI-oriented subsystem but needs to present a USB 2.0 connection to a host. The bridge handles the interface boundary between USB and ATA/ATAPI while operating from 3 V to 3.6 V. Its low-power, high-speed positioning supports compact storage products, although system firmware must support the selected bridge and enumerate the attached device correctly.

💾

External Legacy Disk Interface

An external legacy disk enclosure can use the TUSB6250PFC to connect an ATA/ATAPI-compatible disk subsystem to a USB 2.0 host. The 80-pin TQFP (PFC) package provides the connections needed for bridge control, storage-side signaling, USB data, power, and ground. The implementation must follow the manufacturer pinout and layout guidance while confirming enclosure power, connector, and thermal requirements.

🌐

Network-Attached Storage Interface Board

The TUSB6250PFC is applicable to a network-attached storage interface board that retains an ATA/ATAPI storage subsystem and adds USB service or maintenance connectivity. Its USB 2.0 interface operates with a 3 V to 3.6 V supply and a 0 °C to 70 °C range, matching many internal storage controller boards. Use cases should confirm whether USB is a primary data path or only a diagnostic and recovery path.

📺

Digital Video Recorder Storage

A digital video recorder storage subsystem can use the TUSB6250PFC when the recorder requires a USB 2.0 path to an ATA/ATAPI-compatible disk assembly. The bridge solution provides a defined boundary between USB and ATA/ATAPI while supporting the voltage range common to 3.3 V equipment. Designers should validate recording throughput, power-loss behavior, enclosure service procedures, and the selected drive’s interface compatibility.

🏭

Industrial Backup Appliance

The TUSB6250PFC can serve in an industrial backup appliance that must connect a legacy-compatible storage subsystem to a USB 2.0 service port. Its low-power designation is useful for compact equipment, and the 3 V to 3.6 V operating range aligns with typical embedded rails. Production designs should validate electrostatic protection, cable shielding, ground continuity, and operating temperature around the storage subsystem.

📱

Portable Media Maintenance System

A portable media maintenance or diagnostic system can use the TUSB6250PFC to bridge a USB 2.0 host to an ATA/ATAPI device assembly. The low-power, high-speed interface positioning supports service equipment where compactness and straightforward connectivity are important. The 80-pin PFC footprint requires careful fanout and layout, while the 0 °C to 70 °C operating range requires suitable enclosure conditions.

What is the Texas Instruments TUSB6250PFC?
The Texas Instruments TUSB6250PFC is a low-power, high-speed USB 2.0 to ATA/ATAPI bridge controller in an 80-pin TQFP (PFC) package. According to the manufacturer product page, it operates from 3 V to 3.6 V and is intended for systems that need a USB host connection to compatible ATA or ATAPI storage equipment.
What are the key specifications of TUSB6250PFC that engineers should know?
The TUSB6250PFC combines a USB 2.0 host interface with ATA/ATAPI storage-side signaling, 3 V to 3.6 V operation, and an 80-pin TQFP package measuring 12 x 12 mm. According to Texas Instruments, the device supports a 0 °C to 70 °C operating range and is categorized as a low-power, high-speed bridge solution.
What package and temperature range does TUSB6250PFC use?
The TUSB6250PFC uses an 80-pin TQFP (PFC) surface-mount package measuring 12 x 12 mm. The manufacturer specifies an operating temperature range from 0 °C to 70 °C. The 80-pin footprint and its pin assignments should be checked against the manufacturer pin-description table before PCB layout.
Where can I download the TUSB6250PFC datasheet PDF?
The official TUSB6250PFC datasheet and supporting documents are available through the Texas Instruments product page listed on this page. The manufacturer part-details page identifies the device as an 80-pin USB 2.0 ATA/ATAPI bridge and provides the appropriate technical documentation for the PFC package.
Where can I find the TUSB6250PFC pinout?
The TUSB6250PFC pinout is found in the pin-description table of the manufacturer datasheet for the 80-pin PFC package. Use that table to assign USB, ATA/ATAPI, power, control, and ground nets because the device has 80 pins and cannot be treated as a generic 80-pin layout.
What can replace the TUSB6250PFC?
A valid drop-in replacement for the TUSB6250PFC must use the same 80-pin TQFP (PFC) footprint, match the USB and ATA/ATAPI pin assignments, and preserve the 3 V to 3.6 V operating range. No confirmed pin-compatible replacement MPN is identified here, so do not substitute a bridge solely because it is described as USB 2.0 or ATA/ATAPI compatible.
Is TUSB6250PFC suitable for a USB storage controller board?
The TUSB6250PFC is suitable for a USB storage controller board when the attached device implements the compatible ATA/ATAPI interface and the board meets the electrical and pin-layout requirements. Its USB 2.0 interface, low-power positioning, 3 V to 3.6 V supply range, and 80-pin PFC package support legacy storage-interface integration.
TUSB6250PFC vs a native USB storage controller: which is better?
The TUSB6250PFC is better when an existing subsystem exposes ATA/ATAPI and needs to be connected to a USB 2.0 host. A native USB storage controller is generally preferable when the storage device directly implements USB because it can eliminate a translation bridge and reduce board complexity. The correct choice depends on the device interface, firmware, and enclosure architecture.
When should I choose TUSB6250PFC instead of a redesigned USB storage controller?
Choose the TUSB6250PFC when preserving an ATA/ATAPI subsystem is more important than redesigning the storage connection from the ground up. Its USB 2.0 interface and 3 V to 3.6 V operation suit low-power bridge designs, but a native USB controller may offer lower component count and simpler firmware when the attached media can support USB directly.
Is TUSB6250PFC in stock and what is its lead time?
Current stock and lead time for the TUSB6250PFC should be requested through the Request a Quote form on this page. Texas Instruments identifies the TUSB6250 family as end-of-life, so availability may be limited to remaining inventory or qualified sourcing channels. Confirm quantity, date code, condition, and packaging before placing an order.
Where can I buy TUSB6250PFC online?
Use the Request a Quote form on this page to request TUSB6250PFC availability, lead time, and a quotation. The request should identify the exact 80-pin PFC package, required quantity, and acceptable date-code or condition criteria. Because the family is listed as end-of-life, confirmed supply status is important before committing the component to a production design.
What is the price of TUSB6250PFC?
Request a current TUSB6250PFC quotation through the Request a Quote form on this page. End-of-life inventory can vary substantially by quantity, condition, date code, and traceable supply chain. The form allows the exact package variant, quantity schedule, and sourcing requirements to be reviewed before an order is placed.
Does TUSB6250PFC support low-power USB operation?
The TUSB6250PFC is identified by Texas Instruments as a low-power, high-speed USB 2.0 ATA/ATAPI bridge solution. The manufacturer page specifies 3 V to 3.6 V operation and a 0 °C to 70 °C temperature range. Detailed suspend current, bus-powered behavior, and operating-current limits must be confirmed in the manufacturer datasheet.
What electrical and PCB checks are required for TUSB6250PFC?
The essential checks are a 3 V to 3.6 V supply, correct sequencing, compliant USB and ATA/ATAPI routing, and the exact 80-pin PFC land pattern. Use the manufacturer reference layout and pin table when assigning nets, place required bypass capacitors near their pins, and preserve continuous ground-plane return paths for reliable high-speed operation.
Is the TUSB6250PFC RoHS compliant and lead-free?
RoHS and lead-free status should be confirmed for the exact TUSB6250PFC orderable configuration before production release. The available product information identifies the package and operating conditions but does not provide a definitive compliance declaration. Use the manufacturer’s material or environmental documentation associated with the specific device and package.

엔지니어링 참조 데이터: TUSB6250PFC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TUSB6250PFC when an existing storage subsystem exposes ATA/ATAPI and the product must connect through USB 2.0 without redesigning the storage media interface. Its 3 V to 3.6 V operating range, low-power positioning, 80-pin TQFP (PFC) package, and 0 °C to 70 °C range suit embedded storage appliances, service tools, and legacy disk-interface products. Select a native USB storage controller instead when the attached media supports USB directly; that can simplify firmware, reduce board complexity, and remove the translation stage. Do not select a substitute solely by USB version or package count. A valid drop-in option must match every PFC pin assignment and provide equivalent USB and ATA/ATAPI behavior. Because this family is listed as end-of-life, production planning should also include lifecycle risk, traceability requirements, and a confirmed supply plan.

대체품과의 비교

파라미터 이 제품
Brand Texas Instruments
Package 80-pin TQFP (PFC), 12 x 12 mm
Product Type USB 2.0 to ATA/ATAPI bridge controller
USB Interface USB 2.0
Storage-Side Interface ATA/ATAPI
Operating Voltage 3 V to 3.6 V
Operating Temperature 0 °C to 70 °C
Power Class Low-power, high-speed solution
Number of Pins 80 pins

주요 차별점

  • Dedicated USB-to-ATA/ATAPI translation in one controller (vs Native USB storage controller)
  • Low-power bridge positioning for embedded storage equipment (vs High-power USB-to-ATA bridge redesign)
  • Established 80-pin TQFP integration footprint (vs Unverified generic 80-pin replacement)

설계 노트

Use the manufacturer TQFP (PFC) land pattern and pin-description table without substituting a generic 80-pin footprint. Place the required bypass capacitors close to their associated power pins, route USB and ATA/ATAPI interfaces away from noisy sources, and maintain uninterrupted ground-plane return paths beneath the device.

USB and ATA/ATAPI signals are high-speed digital interfaces even though the device is commonly described as a low-power bridge. Follow the manufacturer routing lengths, impedance, via-count, and topology guidance, and provide continuous reference planes. Avoid splitting ground regions beneath the controller or introducing long stubs into either interface.

Design the 3 V to 3.6 V supply rail within the manufacturer's operating limits and verify startup, loading, and attached-device power requirements. Bus-powered operation and externally powered storage behave differently, so confirm which source supplies the ATA side. Include local bulk and high-frequency decoupling where the reference circuit specifies it.

Do not assume that every USB-to-ATA bridge is pin-compatible with the TUSB6250PFC. A replacement must match the complete 80-pin PFC pinout, USB and ATA/ATAPI signal assignments, supply levels, and supported device behavior. Also verify that host software and embedded firmware recognize the bridge and that the selected drive supports the intended ATA/ATAPI command set.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product information identifies the package, interface, voltage range, and temperature range. Confirm material and environmental declarations for the exact orderable device and package.

관련 검색

TUSB6250PFC datasheet TUSB6250PFC datasheet pdf TUSB6250PFC pinout TUSB6250PFC equivalent TUSB6250PFC replacement TUSB6250PFC cross reference TUSB6250PFC footprint TUSB6250PFC schematic Texas Instruments TUSB6250PFC TUSB6250PFC price TUSB6250PFC stock TUSB6250PFC USB 2.0 ATA bridge TUSB6250PFC application circuit TUSB6250 TQFP 80 pinout

관련 부품 & 용어

Texas Instruments TUSB6250 TUSB6250PFC USB 2.0 ATA ATAPI USB interface controller USB-to-ATA bridge bridge controller storage interface interface IC semiconductor TQFP-80 TQFP package family surface-mount package SMD 3 V power rail low-power bridge high-speed USB interface ATA transfer USB host external storage firmware printed circuit board
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기