TUSB6250PFC - USB 2.0 ATA/ATAPI Bridge | Texas Instruments
MPN: TUSB6250PFC ✗ Cuối đờiTUSB6250PFC Tóm tắt
A USB-to-ATA/ATAPI bridge controller is an interface IC that translates USB host transactions into ATA commands understood by compatible storage devices. This controller family belongs to the broader USB interface-controller and storage-interface hierarchy, allowing equipment without a native ATA interface to communicate with legacy-compatible disk or optical-storage subsystems through USB 2.0.
The TUSB6250PFC is identified specifically as a low-power, high-speed USB 2.0 to ATA/ATAPI bridge solution. Its operating range of 3 V to 3.6 V supports integration with 3.3 V equipment, while the high-speed interface positioning makes it suitable for storage-oriented USB ports requiring greater throughput than a low-speed USB peripheral. The 80-pin TQFP (PFC) package provides a substantial number of interface, power, control, and ground connections.
The architecture separates USB-side signaling from ATA/ATAPI-side signaling so that a USB host can communicate through a standardized external interface while the bridge manages command translation and device-side control. This division of responsibilities permits reuse in USB storage appliances, legacy disk subsystems, and backup or archival equipment that originally relied on an ATA interface. USB bus powering and suspend behavior also make power management an important part of the implementation.
Typical applications include USB-connected storage appliances, external disk interfaces, network-attached storage controller boards, digital video recorders, backup appliances, and industrial data-acquisition systems with compatible legacy storage. Designers should confirm device support, USB enumeration behavior, power requirements, and signal compatibility before integrating the controller into a new system.
The primary design task is matching the TUSB6250PFC pin configuration, voltage rails, interface timing, and PCB land pattern exactly to the selected storage architecture. Keep USB and ATA/ATAPI traces routed according to the manufacturer layout guidance, provide the required bypass capacitors, and maintain solid ground-plane continuity to reduce data-integrity and emissions risks.
This product page combines the manufacturer interface definition, package and temperature details, drop-in replacement availability, comparison data, and practical PCB guidance. It helps engineers evaluate the TUSB6250PFC as a USB 2.0 ATA/ATAPI bridge while highlighting the electrical and footprint checks required for a successful design.
Bộ thay thế dễ dàng lắp đặt cho TUSB6250PFC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếTUSB6250PFC Thông số kỹ thuật
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Interface | USB 2.0 |
| Storage-Side Interface | ATA/ATAPI |
| Performance Class | High-speed and low-power |
| Operating Voltage | 3 V to 3.6 V |
| Nhiệt độ hoạt động | 0 °C to 70 °C |
| Hộp | 80-pin TQFP (PFC) |
| Package Dimensions | 12 x 12 mm |
| Kiểu lắp đặt | Surface mount |
| Số lượng chân | 80 pins |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
Hướng dẫn cấu hình chân TUSB6250PFC 12 x 12 mm
Cấu hình chân cho TUSB6250PFC (12 x 12 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TUSB6250PFC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TUSB6250PFC phù hợp cho 6 Áp dụngs: USB Storage Appliance Bridge, External Legacy Disk Interface, Network-Attached Storage Interface Board, Digital Video Recorder Storage, Industrial Backup Appliance, Portable Media Maintenance System.
USB Storage Appliance Bridge
The TUSB6250PFC fits a USB storage appliance that retains an ATA/ATAPI-oriented subsystem but needs to present a USB 2.0 connection to a host. The bridge handles the interface boundary between USB and ATA/ATAPI while operating from 3 V to 3.6 V. Its low-power, high-speed positioning supports compact storage products, although system firmware must support the selected bridge and enumerate the attached device correctly.
External Legacy Disk Interface
An external legacy disk enclosure can use the TUSB6250PFC to connect an ATA/ATAPI-compatible disk subsystem to a USB 2.0 host. The 80-pin TQFP (PFC) package provides the connections needed for bridge control, storage-side signaling, USB data, power, and ground. The implementation must follow the manufacturer pinout and layout guidance while confirming enclosure power, connector, and thermal requirements.
Network-Attached Storage Interface Board
The TUSB6250PFC is applicable to a network-attached storage interface board that retains an ATA/ATAPI storage subsystem and adds USB service or maintenance connectivity. Its USB 2.0 interface operates with a 3 V to 3.6 V supply and a 0 °C to 70 °C range, matching many internal storage controller boards. Use cases should confirm whether USB is a primary data path or only a diagnostic and recovery path.
Digital Video Recorder Storage
A digital video recorder storage subsystem can use the TUSB6250PFC when the recorder requires a USB 2.0 path to an ATA/ATAPI-compatible disk assembly. The bridge solution provides a defined boundary between USB and ATA/ATAPI while supporting the voltage range common to 3.3 V equipment. Designers should validate recording throughput, power-loss behavior, enclosure service procedures, and the selected drive’s interface compatibility.
Industrial Backup Appliance
The TUSB6250PFC can serve in an industrial backup appliance that must connect a legacy-compatible storage subsystem to a USB 2.0 service port. Its low-power designation is useful for compact equipment, and the 3 V to 3.6 V operating range aligns with typical embedded rails. Production designs should validate electrostatic protection, cable shielding, ground continuity, and operating temperature around the storage subsystem.
Portable Media Maintenance System
A portable media maintenance or diagnostic system can use the TUSB6250PFC to bridge a USB 2.0 host to an ATA/ATAPI device assembly. The low-power, high-speed interface positioning supports service equipment where compactness and straightforward connectivity are important. The 80-pin PFC footprint requires careful fanout and layout, while the 0 °C to 70 °C operating range requires suitable enclosure conditions.
Dữ liệu tham khảo kỹ thuật cho TUSB6250PFC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Texas Instruments |
| Package | 80-pin TQFP (PFC), 12 x 12 mm |
| Product Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Interface | USB 2.0 |
| Storage-Side Interface | ATA/ATAPI |
| Operating Voltage | 3 V to 3.6 V |
| Operating Temperature | 0 °C to 70 °C |
| Power Class | Low-power, high-speed solution |
| Number of Pins | 80 pins |
Bảo phân biệt quan trọng
- Dedicated USB-to-ATA/ATAPI translation in one controller (vsNative USB storage controller)
- Low-power bridge positioning for embedded storage equipment (vsHigh-power USB-to-ATA bridge redesign)
- Established 80-pin TQFP integration footprint (vsUnverified generic 80-pin replacement)
Ghi chú thiết kế
Use the manufacturer TQFP (PFC) land pattern and pin-description table without substituting a generic 80-pin footprint. Place the required bypass capacitors close to their associated power pins, route USB and ATA/ATAPI interfaces away from noisy sources, and maintain uninterrupted ground-plane return paths beneath the device.
USB and ATA/ATAPI signals are high-speed digital interfaces even though the device is commonly described as a low-power bridge. Follow the manufacturer routing lengths, impedance, via-count, and topology guidance, and provide continuous reference planes. Avoid splitting ground regions beneath the controller or introducing long stubs into either interface.
Design the 3 V to 3.6 V supply rail within the manufacturer's operating limits and verify startup, loading, and attached-device power requirements. Bus-powered operation and externally powered storage behave differently, so confirm which source supplies the ATA side. Include local bulk and high-frequency decoupling where the reference circuit specifies it.
Do not assume that every USB-to-ATA bridge is pin-compatible with the TUSB6250PFC. A replacement must match the complete 80-pin PFC pinout, USB and ATA/ATAPI signal assignments, supply levels, and supported device behavior. Also verify that host software and embedded firmware recognize the bridge and that the selected drive supports the intended ATA/ATAPI command set.
Thông tin tuân thủ
The manufacturer product information identifies the package, interface, voltage range, and temperature range. Confirm material and environmental declarations for the exact orderable device and package.