Microchip Technology

VSC8552XKS-04 - Dual-Port Gigabit Ethernet PHY | Microchip

부품 번호: VSC8552XKS-04 ✗ 단종
1 V Vdss 256-terminal PBGA Package Gigabit Ethernet Speed
MOQ: 1 |

VSC8552XKS-04 개요

The Microchip Technology VSC8552XKS-04 is a dual-port Gigabit Ethernet physical-layer transceiver with a nominal 1 V supply, designed for automotive networking equipment and other space-constrained Ethernet systems. It is packaged in a 256-terminal PBGA measuring 17 mm by 17 mm and is specified for a -40 °C to +125 °C temperature range. The dual-port configuration integrates two Gigabit Ethernet PHYs in one high-density surface-mount package, reducing the component count required for dual-port network equipment.

A Gigabit Ethernet PHY is a physical-layer transceiver that converts digital data into electrical signals for transmission over copper cabling and reconstructs received signals for the associated media-access controller. Within the Ethernet hierarchy, a PHY sits below the MAC layer and above the physical cable interface. The VSC8552 therefore belongs to the interface-IC and network-interface categories rather than the processor or switching-controller categories. Its two independent Gigabit Ethernet ports support equipment that requires two physical network connections within one device.

The principal published features of the VSC8552 include dual-port Gigabit Ethernet operation and EcoEthernet IEEE 802.3az Energy Efficient Ethernet technology. IEEE 802.3az allows a compliant link to reduce power consumption when network traffic is light. A nominal 1 V core supply supports integration into modern high-speed digital equipment, while the automotive-grade temperature range allows operation from -40 °C to +125 °C in demanding environmental conditions.

The 256-PBGA package provides 256 bottom-side terminals on a 17 mm by 17 mm square body. This dense land pattern can reduce board footprint but requires careful escape routing, via planning, and power-distribution design. Because the package combines two PHYs and a high pin count, PCB signal-integrity and thermal performance depend heavily on layer count, return paths, via geometry, and layout symmetry. The nominal 1 V supply should be distributed through low-impedance power and ground planes rather than narrow traces.

Typical uses include automotive Ethernet gateways, vehicle network interfaces, industrial communication equipment, dual-port embedded systems, and access-network equipment. The dual-port architecture is particularly useful when one product must offer two copper Ethernet connections without using two separate PHY packages. The manufacturer identifies enterprise networks, data centers, and consumer electronics as VSC8552 application areas, while the automotive-temperature version is suited to vehicle electronics and other extended-temperature systems.

The primary design consideration is that a valid replacement must match the 256-terminal PBGA footprint, ball map, supply requirements, clocking, register behavior, and Ethernet application requirements. The VSC8552XKS-05 is identified as an alternative catalog part in the same 17 mm by 17 mm 256-PBGA format, but firmware, feature, and lifecycle differences still need confirmation before it is treated as an unconditional production substitute.

This page combines the manufacturer positioning, package and environmental characteristics, drop-in candidate review, comparison data, and practical design considerations into an engineering-oriented overview of the VSC8552XKS-04.

드롭인 대체품: VSC8552XKS-04 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

VSC8552XKS-05

✅ 드롭인
📦 256-PBGA (17 mm x 17 mm)
The published core voltage is 1 V for both parts and the package remains 256-PBGA at 17 mm x 17 mm; the -05 suffix replaces the obsolete -04 catalog designation, while qualification and lifecycle details require confirmation.

📋 참조 대체품 (카탈로그에 없음)

VSC8552XKS-04 사양

Product Type Dual-port Gigabit Ethernet PHY transceiver
Number of Ethernet Ports 2 ports
Ethernet Speed Gigabit Ethernet
Nominal Supply Voltage 1 V
동작 온도 범위 -40 °C to +125 °C
Package Type 256-terminal PBGA
Package Dimensions 17 mm x 17 mm
Terminal Count 256 terminals
Terminal Location Bottom side
실장 유형 Surface mount
Energy Efficient Ethernet Standard IEEE 802.3az
Manufacturer Product Family VSC8552 series
Product Category Ethernet interface IC
동작 공급 전압 1 V nominal
Package Shape Square
Terminal Form Ball

VSC8552XKS-04 square 핀 구성 가이드

VSC8552XKS-04(square 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

VSC8552XKS-04의 square 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: VSC8552XKS-04.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

VSC8552XKS-04 적합 용도: 6 애플리케이션s: Automotive Ethernet Gateway, Industrial Dual-Port Communication Equipment, Enterprise Network Edge Device, Data Center Network Interface, Vehicle Network Backbone Node, Consumer Network Gateway.

🚗

Automotive Ethernet Gateway

The VSC8552XKS-04 fits an automotive Ethernet gateway that must provide two network connections while operating across an extended temperature range of -40 °C to +125 °C. Its dual-port Gigabit Ethernet PHY architecture consolidates two physical channels into one 17 mm by 17 mm device, which can simplify board partitioning compared with two separate PHY packages. The nominal 1 V core supply is suited to tightly regulated automotive digital rails, while IEEE 802.3az support can reduce link activity during idle periods. The design should preserve continuous ground references beneath the BGA, use short supply connections, and validate magnetics and channel compliance in the final vehicle-network design.

🏭

Industrial Dual-Port Communication Equipment

The VSC8552XKS-04 is suitable for industrial communication equipment requiring two Gigabit Ethernet physical interfaces in a high-density package. Its -40 °C to +125 °C operating range supports equipment deployed in factories, control cabinets, and outdoor systems where ambient conditions exceed consumer-grade limits. Integrating two PHYs can reduce component count and connector-adjacent routing congestion, although the 256-terminal PBGA requires disciplined via-in-pad and escape-routing strategies. IEEE 802.3az support can lower power consumption when traffic is intermittent, making the device useful for monitoring stations and industrial gateways that must remain network-accessible without maintaining maximum link activity continuously.

🌐

Enterprise Network Edge Device

The VSC8552 can support edge equipment requiring two Gigabit Ethernet links, such as an access controller or compact network interface module. Its dual-port configuration allows separate uplink and service connections without duplicating the physical-layer circuitry footprint. IEEE 802.3az Energy Efficient Ethernet is particularly relevant in enterprise networks where link idle periods can be frequent, although energy performance must be confirmed with the system link partner and network configuration. The 17 mm by 17 mm PBGA offers high pin density but can increase assembly and inspection complexity, so designers should evaluate thermal spreading, BGA assembly capability, and high-speed layer transitions during hardware qualification.

🖥️

Data Center Network Interface

The VSC8552XKS-04 is applicable to specialized data-center network-interface equipment that needs two compact Gigabit Ethernet physical ports. Integrating both ports into one package may simplify enclosure space and provide a consistent PHY implementation across two connections. Its nominal 1 V operating supply aligns with modern high-speed digital power architecture, while EcoEthernet IEEE 802.3az can support power-control objectives in links with variable traffic. In a data-center product, however, thermal design and signal integrity remain critical: high pin-count BGA escape routes can couple aggressors into Ethernet channels, so layer transitions, return paths, magnetics placement, and connector-to-PHY differential routing should be validated using the manufacturer layout guidance.

🚗

Vehicle Network Backbone Node

The VSC8552XKS-04 can serve as the physical-layer element in a vehicle network node that requires two Gigabit Ethernet connections. The -40 °C to +125 °C rating is directly relevant to automotive environmental conditions, and the dual-port organization can support bridging, diagnostic, or service-facing links within one controller. The nominal 1 V supply should be generated from an appropriately regulated automotive rail and filtered close to the BGA power terminals. Because the device is a high-density PBGA, thermal cycling, solder-joint reliability, and differential-channel performance should be evaluated in the final enclosure and wiring environment rather than inferred from the component rating alone.

🧩

Consumer Network Gateway

The VSC8552 family is identified by Microchip for consumer electronics as well as enterprise and data-center systems, making its dual-port PHY suitable for compact routers, media gateways, and connected home equipment. Two Gigabit Ethernet ports can support wired uplink and local-device connectivity in a single package. IEEE 802.3az can reduce power use when one link is lightly loaded, while the 256-terminal PBGA helps contain board area despite a large ball count. Consumer-product implementations still need careful separation between Ethernet differential pairs, clocking domains, and switching or processor supplies. The manufacturer reference layout and channel-compatibility testing should guide magnetics placement, connector clearances, and thermal verification.

What is the VSC8552XKS-04?
The VSC8552XKS-04 is a Microchip Technology dual-port Gigabit Ethernet PHY transceiver packaged in a 256-terminal PBGA. According to the manufacturer product page, the VSC8552 family supports two Gigabit Ethernet ports and EcoEthernet IEEE 802.3az Energy Efficient Ethernet. The automotive-temperature orderable variant operates from -40 °C to +125 °C with a nominal 1 V supply.
What package does the VSC8552XKS-04 use?
The VSC8552XKS-04 uses a 256-terminal PBGA measuring 17 mm by 17 mm. Distributor and technical catalog records identify the terminals as balls located on the bottom of a square surface-mount package. Because it is a high-density BGA, PCB layout should provide a continuous ground reference, short supply connections, and symmetric signal escape routing using the manufacturer land pattern.
What is the operating temperature range of VSC8552XKS-04?
The VSC8552XKS-04 is specified for operation from -40 °C to +125 °C. The manufacturer describes the VSC8552 as a dual-port Gigabit Ethernet PHY, while the technical listing identifies this orderable version for automotive environments. Its extended temperature range supports industrial, vehicle-network, and other applications requiring operation across a wide environmental range.
How many Gigabit Ethernet ports does the VSC8552 provide?
The VSC8552 provides two Gigabit Ethernet ports in one package. This integration can reduce board area compared with a design using two separate single-port PHY devices. Each port must still satisfy the layout, magnetics, termination, clocking, and signal-integrity requirements of its corresponding copper Ethernet channel.
Does the VSC8552 support Energy Efficient Ethernet?
Yes, the VSC8552 family supports EcoEthernet technology based on IEEE 802.3az Energy Efficient Ethernet. The standard is intended to reduce link-level power consumption during periods of low network activity. Product-level energy savings depend on PHY configuration, negotiated link behavior, the connected network equipment, and how frequently the design enters and leaves low-power states.
Where can I download the VSC8552XKS-04 datasheet?
The VSC8552XKS-04 datasheet can be accessed through the Microchip VSC8552 product page or the component’s Octopart datasheet entry. Use the manufacturer PDF for final electrical characteristics, the complete 256-ball pin description, initialization sequence, register map, application circuit, and recommended PCB layout. The pin names and land pattern should be taken directly from that documentation before PCB release.
Where can I find the VSC8552XKS-04 pinout?
The complete VSC8552XKS-04 pinout is in the manufacturer datasheet’s pin-description and land-pattern sections for the 256-terminal 17 mm by 17 mm PBGA. Assigning PCB nets requires all 256 terminal names and the package ball-map orientation. Do not infer ball locations from the square outline or from a generic BGA-256 drawing, because rotated or nonstandard ball maps can cause an otherwise compatible replacement to fail.
What is the best drop-in replacement for VSC8552XKS-04?
VSC8552XKS-05 is the clearest documented drop-in candidate because it is listed as an alternative to VSC8552XKS-04 and uses the same 256-PBGA 17 mm by 17 mm format. Before production use, confirm its electrical characteristics, register compatibility, clocking, automotive qualification, lifecycle status, and firmware expectations. A request for engineering comparison data through the Request a Quote form can help locate the correct successor.
Can VSC8552XKS-05 replace VSC8552XKS-04?
VSC8552XKS-05 can serve as a replacement candidate because technical records identify it as an alternative part and list the same 256-PBGA 17 mm by 17 mm package. The records do not establish that every electrical and software function is identical. Verify supply sequencing, clock requirements, register behavior, PHY features, automotive qualification, and end-of-life change notifications before approving it as an exact drop-in replacement.
VSC8552XKS-04 vs VSC8552XKS-05: which is better?
Both parts are associated with the VSC8552 family and the same 256-PBGA 17 mm by 17 mm package, but VSC8552XKS-05 is the documented alternative to the obsolete VSC8552XKS-04. The better choice is normally VSC8552XKS-05 when its lifecycle and product-change records support continued production. Verify the complete datasheet, firmware, qualification, and customer-notification requirements before substitution.
When should I choose VSC8552XKS-05 over VSC8552XKS-04?
Choose VSC8552XKS-05 when it is the supported successor for the VSC8552XKS-04 and the existing PCB can accept the part without functional changes. Both catalog entries use the same 256-PBGA 17 mm by 17 mm format, which simplifies mechanical replacement. However, package identity alone does not prove regulatory, firmware, or production compatibility, so obtain the applicable Microchip product-change documentation before release.
Is the VSC8552XKS-04 suitable for automotive Ethernet?
The VSC8552XKS-04 is explicitly listed as an automotive-grade Ethernet transceiver with an operating range of -40 °C to +125 °C, making it suitable in principle for automotive networking equipment. The exact AEC-Q100 qualification status is not established by the product listing. Confirm the qualification report, environmental tests, AEC-Q100 status, and Microchip product-change notices for the exact orderable MPN.
Where can I buy VSC8552XKS-04 online?
Use the Request a Quote form on this page to request VSC8552XKS-04 availability, current lifecycle status, and sourcing support. The part is associated with end-of-life activity in the VSC85xx series, so new procurement should account for possible obsolescence and allocation constraints. Quote requests should identify the required quantity, target delivery date, approved source, and whether traceability or automotive documentation is required.
What is the price of VSC8552XKS-04?
The current commercial terms for VSC8552XKS-04 should be requested through the Request a Quote form on this page. Because the VSC85xx series is associated with end-of-life activity, availability, package condition, and traceability can materially affect procurement. Submit the required quantity and any source-inspection requirements so the quotation can reflect the correct supply channel.
What is the lead time and stock status for VSC8552XKS-04?
Current stock and lead time for VSC8552XKS-04 should be confirmed through the Request a Quote form on this page. The listing indicates a 256-PBGA automotive-temperature part, while the VSC85xx series is associated with end-of-life notices. A sourcing response should state available quantity, manufacturing lead time, date code, lot traceability, and whether any remaining units are new surplus or previously installed stock.

엔지니어링 참조 데이터: VSC8552XKS-04 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose VSC8552XKS-05 when searching for an ongoing alternative to the obsolete VSC8552XKS-04 and when the existing PCB uses the documented 256-PBGA 17 mm by 17 mm land pattern. The two parts share a 1 V nominal core supply, making preliminary power compatibility straightforward. However, package and voltage equivalence do not establish complete functional equivalence: compare ball maps, clocking, registers, initialization, firmware, qualification, and Microchip product-change notices before production release. For new dual-port Gigabit Ethernet designs, evaluate the current VSC8552 family and its supported ordering options rather than starting a new platform with an obsolete catalog designation. Use a different Ethernet PHY family only when its electrical, software, package, lifecycle, and qualification requirements have been validated against the complete system design.

대체품과의 비교

파라미터 이 제품 VSC8552XKS-05
Package 256-PBGA (17 mm x 17 mm) 256-PBGA (17 mm x 17 mm)
Brand Microchip Technology Microchip Technology
Product Type Dual-port Gigabit Ethernet PHY Ethernet transceiver
Nominal Supply Voltage 1 V 1 V
Terminal Count 256 terminals 256 terminals
Package Dimensions 17 mm x 17 mm 17 mm x 17 mm

주요 차별점

  • Same documented 256-PBGA mechanical format (vs VSC8552XKS-05)
  • Identical nominal core supply (vs VSC8552XKS-05)
  • Documented same-series replacement candidate (vs VSC8552XKS-05)

설계 노트

Use the exact manufacturer land pattern and ball map for the 256-terminal PBGA rather than a generic BGA-256 footprint. A 17 mm square package leaves little room for arbitrary escape routing, so place Ethernet magnetics and their supporting networks close to the relevant PHY balls. Maintain a continuous ground reference beneath the device, avoid splits across any layer carrying high-speed signals, and route each differential pair as a tightly coupled pair with matched impedance.

Distribute the nominal 1 V supply through low-impedance power and ground planes, with local high-frequency bypass capacitors placed according to the manufacturer reference layout. Decoupling should be located close to the associated BGA power and ground terminals rather than at the system supply connector. Validate power sequencing, startup behavior, voltage tolerance, and the interaction between the PHY rails and any external processor or MAC supplies before releasing the PCB.

Treat each Gigabit Ethernet channel as a controlled-impedance differential route and keep it away from switching supplies, clocks, and unrelated high-speed traffic. The two PHY ports should have symmetric reference layouts to reduce channel-to-channel variation. Check connector, magnetics, and PCB losses together rather than validating them independently, and use the manufacturer's channel and layout guidance to set termination, biasing, and isolation requirements.

A 17 mm by 17 mm BGA can introduce substantial heat-flow distance from its center to the PCB, particularly at the 1 V core rail. Use uninterrupted ground planes and a layer stack that provides effective heat spreading, then evaluate junction and board temperatures in the maximum-activity enclosure condition. The -40 °C to +125 °C component rating does not by itself guarantee adequate system cooling or solder-joint reliability across the complete temperature range.

Do not approve a replacement solely because both devices use a 256-terminal PBGA. Verify the ball map, supply pins, clock requirements, register behavior, initialization sequence, firmware expectations, and qualification status. Also check Microchip product-change and end-of-life notices because the VSC85xx series is associated with lifecycle transitions. A mechanical footprint match is necessary for drop-in use but is not sufficient for functional equivalence.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The part is identified as an automotive-temperature Ethernet transceiver operating from -40 °C to +125 °C, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not included in the cited product records.

관련 검색

VSC8552XKS-04 datasheet VSC8552XKS-04 pinout VSC8552XKS-04 datasheet pdf VSC8552XKS-04 replacement VSC8552XKS-04 equivalent VSC8552XKS-05 cross reference Microchip VSC8552XKS-04 VSC8552XKS-04 256 PBGA VSC8552XKS-04 1V VSC8552XKS-04 automotive Ethernet VSC8552XKS-04 price VSC8552XKS-04 stock

관련 부품 & 용어

Microchip Technology VSC8552XKS-04 VSC8552XKS-05 VSC8552 Dual-port Gigabit Ethernet PHY Ethernet transceiver Gigabit Ethernet IEEE 802.3az EcoEthernet Energy Efficient Ethernet 256-PBGA BGA-256 17 mm x 17 mm package Surface mount Automotive Ethernet Industrial Ethernet Nominal 1 V supply -40 °C to +125 °C Ethernet MAC Physical layer AEC-Q100 RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기