VTM48MP010T107AA1 - 107A 1/48 VTM Current Multiplier | Vicor
부품 번호: VTM48MP010T107AA1 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $88.5 | $88.50 |
| 10 | $79.65 | $796.50 |
| 100 | $70.8 | $7,080.00 |
| 500 | $63.5 | $31,750.00 |
| 1,000 | $56.95 | $56,950.00 |
VTM48MP010T107AA1 개요
A VTM current multiplier is a transformer-like isolated DC-DC converter stage used in factorized power architectures. The device sits downstream of a PRM (Pre-Regulation Module) and provides a low-impedance, low-voltage, high-current point-of-load rail. Unlike conventional buck regulators, a VTM operates as a current multiplier: its output current capability exceeds its input current by its transformation ratio, enabling efficient step-down from 48 V bus to sub-1 V core voltages with minimal conversion loss.
Key specifications include 107 A continuous output current, 0.95 V nominal output voltage, 45.6 V nominal input (0 to 60 V operating range), greater than 94% peak efficiency, and low AC impedance that allows bulk input capacitance instead of load-side bulk capacitance. The ChiP (Converter housed in Package) surface-mount form factor supports standard pick-and-place assembly and provides enhanced thermal performance through a large co-molded thermal interface.
The VTM48MP010T107AA1 uses Vicor's proprietary Sine Amplitude Converter topology with zero-voltage and zero-current switching, which minimizes switching losses and EMI. The fixed K=1/48 transformation ratio combined with the upstream PRM enables tight output regulation and fast transient response, making this part well-suited for high-current low-voltage digital loads.
Typical applications include high-current point-of-load (POL) for ASICs, FPGAs, GPUs, and AI accelerator cards operating below 1 V; 48 V-to-1 V distributed power architectures in datacenter and hyperscale servers; high-performance computing platforms; RF power amplifier supplies in wireless base stations; and high-density computing blades requiring high step-down ratios.
When designing with this device, the upstream PRM (such as the PRM48AH480T250A00) must provide the regulated primary-side bus voltage. Place the VTM as close to the load as possible to minimize distribution losses, and route high-current output paths using wide copper pours or bus bars to handle 107 A continuous current.
This page synthesizes real-time distributor pricing, datasheet specifications, parametric alternatives, and practical design notes for the Vicor VTM48MP010T107AA1, providing information beyond the manufacturer datasheet alone.
드롭인 대체품: VTM48MP010T107AA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
VTM48MP010T135AA1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
VTM48MP010T080AA1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
VTM48MP010T107AA0
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
VTM48MP010T107AA1 최대 정격 & 전기적 특성
| 토폴로지 | VTM Current Multiplier (Sine Amplitude Converter / SAC) |
| Transformation Ratio (K) | 1/48 |
| 입력 전압 범위 | 0 V to 60 VDC |
| Nominal Input Voltage | 45.6 VDC |
| 출력 전압 | 0.95 VDC nominal (0 V to 1.25 VDC range) |
| Output Current | 107 A DC continuous |
| Output Power | Approximately 102 W |
| Peak Efficiency | Greater than 94% |
| 패키지 | Vicor 1323 ChiP (surface mount) |
| 실장 유형 | Surface Mount (pick-and-place compatible) |
| 동작 온도 | -40C to +125C (per Vicor datasheet family) |
| Switching Topology | Zero-voltage, zero-current switching (SAC) |
| Isolation | Functional (designed to operate with isolated PRM upstream) |
| RoHS 상태 | Compliant (per Vicor product page) |
| Compatible Upstream PRM | Vicor PRM48AH series or equivalent 48V PRM regulators |
VTM48MP010T107AA1 핀 구성
| 핀 1 | VIN+ — Positive input voltage from PRM primary bus (0 to 60 VDC) |
| 핀 2 | VIN- — Input return (ground reference for primary bus) |
| 핀 3 | PC — Primary Control - enables/disables the VTM and reports faults |
| 핀 4 | TM — Temperature Monitor - analog voltage proportional to internal junction temperature |
| 핀 5 | VOUT+ — Positive output voltage (0 to 1.25 VDC nominal 0.95 VDC at 107 A) |
| 핀 6 | VOUT- — Output return (ground reference for secondary side) |
| 핀 7 | Thermal Pad — Bottom thermal pad - must be soldered to PCB thermal land for heat dissipation |
일반적인 애플리케이션
VTM48MP010T107AA1 적합 용도: 6 애플리케이션s: High-Current Point-of-Load (POL) for AI Accelerators, 48V-to-1V Datacenter Distributed Power Architecture, High-Performance Computing (HPC) and FPGA Core Power, RF Power Amplifier Supplies in Wireless Base Stations, High-Density Computing Blade Systems, Industrial High-Power Computing and Test Equipment.
High-Current Point-of-Load (POL) for AI Accelerators
The VTM48MP010T107AA1 is ideally suited for powering sub-1V AI accelerator ASICs and GPUs that demand 80 to 107 A continuous current. With its 0.95 V nominal output, greater than 94% peak efficiency, and 1/48 K-factor transformation ratio, the part minimizes power loss when stepping down from a 48 V intermediate bus. When paired with a Vicor PRM48AH upstream regulator, the combined factorized power system delivers fast transient response — critical for AI training workloads where load steps can exceed 50 A in microseconds — while the VTM's low AC impedance allows bulk input capacitance instead of load-side bulk capacitance.
추천
48V-to-1V Datacenter Distributed Power Architecture
The VTM48MP010T107AA1 supports modern 48 V datacenter power architectures by stepping down from the 48 V bus to a 0.95 V core voltage at 107 A. Its greater than 94% efficiency, zero-voltage/zero-current switching Sine Amplitude Converter topology, and 1323 ChiP surface-mount package make it ideal for high-density server and switch boards. The fixed 1/48 K-factor transformation ratio enables predictable output regulation when the upstream PRM regulates the primary bus, reducing design complexity versus traditional multi-stage buck designs at the point of load.
추천
High-Performance Computing (HPC) and FPGA Core Power
For FPGA and HPC processor core rails requiring 0.95 V at 80 to 100 A, the VTM48MP010T107AA1 provides an efficient single-stage conversion solution. The 107 A output capability supports large FPGAs such as Xilinx Virtex UltraScale+ and Intel Stratix 10 with margin for transient loading. The ChiP package's superior thermal conductivity via co-molded thermal interface maintains junction temperature at full 107 A load, and the low-impedance AC characteristic bypasses bulk output capacitors, simplifying PCB layout in high-density HPC boards.
추천
RF Power Amplifier Supplies in Wireless Base Stations
The VTM48MP010T107AA1 can power RF power amplifier stages in 5G and LTE base stations where clean, low-voltage, high-current delivery is required. The greater than 94% efficiency reduces thermal stress in sealed outdoor enclosures, and the zero-voltage/zero-current SAC switching minimizes EMI — a critical consideration for RF systems. At 0.95 V and 107 A, the part can supply multiple PA stages through distribution networks while maintaining the low-noise characteristics required for receiver sensitivity on co-located radio chains.
추천
High-Density Computing Blade Systems
The compact 1323 ChiP surface-mount package of the VTM48MP010T107AA1 is optimized for high-density blade servers and switching systems where PCB real estate is constrained. Delivering 102 W of output power in a footprint suitable for standard pick-and-place assembly, the part enables dense power delivery without sacrificing efficiency. The factorized power architecture using a 48V PRM upstream and the VTM downstream reduces distribution losses compared to traditional 12V bus architectures, improving overall blade-level efficiency.
추천
Industrial High-Power Computing and Test Equipment
Industrial test systems, automated test equipment (ATE), and industrial controllers requiring 0.95 V at 107 A benefit from the VTM48MP010T107AA1's wide -40C to +125C operating temperature range and robust ChiP packaging. The greater than 94% efficiency reduces cooling requirements in factory-floor enclosures, while the surface-mount ChiP package withstands industrial vibration profiles better than through-hole alternatives. Pairing with a PRM upstream enables flexible factory-bus voltage handling from standard 24V or 48V industrial supplies.
추천
추천 제품 요약
엔지니어링 참조 데이터: VTM48MP010T107AA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | VTM48MP010T135AA1 | VTM48MP010T080AA1 | VTM48MP010T107AA0 |
|---|---|---|---|---|
| Brand | Vicor | Vicor | Vicor | Vicor |
| Package | 1323 ChiP | 1323 ChiP - same | 1323 ChiP - same | 1323 ChiP - same |
| Output Current | 107 A | 135 A (+26%) | 80 A (-25%) | 107 A (identical) |
| Output Voltage | 0.95 VDC nominal | 0.95 VDC nominal | 0.95 VDC nominal | 0.95 VDC nominal |
| Transformation Ratio (K) | 1/48 | 1/48 | 1/48 | 1/48 |
| Peak Efficiency | Greater than 94% | Greater than 94% | Greater than 94% | Greater than 94% |
| Topology | VTM Current Multiplier (SAC) | VTM Current Multiplier (SAC) | VTM Current Multiplier (SAC) | VTM Current Multiplier (SAC) |
| Mounting Type | Surface Mount (1323 ChiP) | Surface Mount (1323 ChiP) | Surface Mount (1323 ChiP) | Surface Mount (1323 ChiP) |
주요 차별점
- Highest current density in the Vicor 1/48 K-factor VTM family (vs VTM48MP010T080AA1)
- Drop-in compatible upgrade path to higher-current VTM (vs VTM48MP010T135AA1)
- Proprietary ChiP package with co-molded thermal interface (vs VTM48MP010T107AA0 (A0 thermal grade))
설계 노트
The VTM48MP010T107AA1 in the 1323 ChiP package dissipates approximately 6 to 8 W at full 107 A load (at greater than 94% efficiency). The ChiP's co-molded thermal interface requires a properly sized PCB thermal land with thermal vias to an internal copper plane. Estimated: at 7 W dissipation with the ChiP's typical theta_JA of approximately 8 C/W, junction temperature rises 56 C above ambient. For continuous 107 A operation in ambient temperatures above 70 C, forced-air cooling or a heatsink attached to the top of the ChiP is recommended to keep Tj below 125 C.
Route the high-current 107 A output paths using wide copper pours (minimum 10 mm wide 2 oz copper per 50 A) or dedicated bus bars. According to Vicor's VTM datasheet, the input and output power pads of the 1323 ChiP are designed for direct PCB mounting with thermal vias. Place the input capacitors close to VIN+/VIN- pads and output capacitors close to VOUT+/VOUT- to minimize parasitic inductance, which is critical given the high di/dt at 107 A switching transitions.
The VTM48MP010T107AA1 must NEVER be operated without an upstream PRM providing a regulated primary-side voltage. Unlike standalone buck regulators, a VTM is a current multiplier and will pass through the primary bus voltage scaled by 1/48 if the PRM is missing or unregulated. Per the Vicor datasheet, the upstream PRM (such as PRM48AH480T250A00) handles output regulation — the VTM simply performs fixed-ratio current multiplication. Operating the VTM without a PRM will deliver approximately 1.25 VDC at the output when 60 VDC is applied at the input, which can damage downstream 1V-core ASICs.
Minimize the primary-to-secondary loop area in PCB layout to reduce EMI and switching losses. The PC (Primary Control) pin should be pulled high to enable the VTM, and the TM (Temperature Monitor) pin provides an analog voltage proportional to internal junction temperature for thermal management. According to the Vicor datasheet, the TM pin output voltage scales with temperature and can be fed to an ADC for real-time thermal monitoring in safety-critical applications such as automotive or medical systems.
규정 준수 정보
RoHS compliant per Vicor product page. Not AEC-Q100 qualified - this is a commercial-grade part for datacenter, telecom, and industrial applications.
