WM8594SEFT/V - 24-Bit 192kHz Audio Codec | Cirrus Logic
부품 번호: WM8594SEFT/V ✓ 활성WM8594SEFT/V 개요
An audio codec is an interface IC that converts between analog audio signals and a digital audio data stream. Within the product hierarchy, a codec combines an analog-to-digital converter, digital-to-analog converter, routing logic, and audio signal management into one integrated circuit. This integration allows a host processor to exchange digital audio data while the codec handles analog input selection, output routing, gain control, and signal conversion.
The WM8594SEFT/V supports 24-bit audio operation at a maximum sampling rate of 192kHz and accommodates 2Vrms multi-channel audio. Its flexible input and output selection allows multiple analog sources and destinations to be routed through the device, while digital and analog volume controls provide attenuation and gain adjustment within the audio signal chain. These features make the codec suitable for multi-zone entertainment equipment, communications terminals, recording interfaces, and other systems requiring more than a basic stereo codec.
As a mixed-signal device, the WM8594SEFT/V requires careful treatment of analog signal integrity and digital clock routing. Its multi-channel architecture can simplify board design by consolidating several audio functions, but correct grounding, decoupling, impedance control, and clock implementation remain essential. The analog and digital sections should use a controlled layout that minimizes coupling between high-gain audio paths, switching clocks, digital control buses, and external power-supply nodes.
Typical uses include powered speakers, home-audio equipment, automotive infotainment systems, telephones, personal-audio products, and multimedia appliances. The 192kHz capability is useful when the source system requires high-resolution digital audio, while the 2Vrms interface capability can reduce gain constraints in conventional line-level audio paths. External amplifiers may still be required when the codec must directly drive low-impedance speakers rather than line-level inputs.
For a new layout, follow the manufacturer datasheet for the pin-description table, recommended application circuit, decoupling network, clock requirements, and exposed routing guidance. Verify the exact input and output topology, analog signal ranges, digital audio interface format, and supported clocks before finalizing the PCB. Because this page is synthesized from the listed manufacturer and distributor resources, its main added value is a design-oriented summary of the codec's use cases, sourcing requirements, and selection considerations.
드롭인 대체품: WM8594SEFT/V — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청WM8594SEFT/V 최대 정격 & 전기적 특성
| Product Type | Multi-channel audio codec |
| Manufacturer | Cirrus Logic |
| Original Manufacturer | Wolfson Microelectronics plc |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Analog Signal Level | 2 Vrms |
| Input Selection | Flexible multi-channel input selection |
| Output Selection | Flexible multi-channel output selection |
| Digital Volume Control | Supported |
| Analog Volume Control | Supported |
| Serial Audio Interface | 24-bit serial audio interface |
| 패키지 | 48-pin TQFP, 7 mm x 7 mm |
| 실장 유형 | Surface mount |
WM8594SEFT/V 48-pin tqfp, 7 mm x 7 mm 핀 구성 가이드
WM8594SEFT/V(48-pin tqfp, 7 mm x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: WM8594SEFT/V.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
WM8594SEFT/V 적합 용도: 6 애플리케이션s: High-Resolution Home Audio, Automotive Infotainment Audio, Communications Terminal Audio, Powered Speaker and Amplifier Front End, Multichannel Recording Interface, Gaming and Multimedia Console.
High-Resolution Home Audio
The WM8594SEFT/V fits high-resolution home-audio systems that receive digital audio from a host decoder and require multiple analog line outputs. Its 24-bit operation, support for sampling rates up to 192kHz, and 2Vrms signal handling provide a suitable interface for a high-performance playback chain. Flexible output selection and analog volume control simplify channel management when the design includes multiple analog destinations. The codec should sit near the line-level input of the output amplifier, with short, shielded-when-needed analog traces and separate return paths. Verify the digital-audio format, sample-rate support, clock source, and codec gain range against the host and amplifier requirements before releasing the PCB.
추천
Automotive Infotainment Audio
The WM8594SEFT/V can support the audio-conversion stage of an infotainment or head-unit design requiring flexible analog routing and high-resolution digital audio. Its 24-bit interface, 192kHz maximum sampling rate, and multi-channel volume control are relevant when the host processor supplies multimedia audio for several zones. Because the available product information does not establish AEC-Q100 status or temperature limits, an automotive design must verify qualification and environmental requirements for the exact ordering code. The implementation should isolate codec clocks and switching supplies from microphone, auxiliary-input, and output paths while following the manufacturer reference layout for decoupling and grounding.
추천
Communications Terminal Audio
The WM8594SEFT/V is applicable to communications terminals where a host processor handles call audio but the board also needs analog microphone, line, speaker, or headset routing. Flexible analog input and output selection can consolidate several audio paths, while digital and analog volume control permits gain adjustment within the codec domain. For voice terminals, keep microphone inputs away from clocks and power converters, use the manufacturer grounding strategy, and evaluate the complete signal chain before setting software gain. The codec processes conversion and routing but does not eliminate the need for microphone biasing, output amplifiers, ESD protection, or acoustic-system design.
추천
Powered Speaker and Amplifier Front End
The WM8594SEFT/V can serve as the digital-to-analog and routing front end of a powered-speaker system when the device drives a line-level amplifier rather than a low-impedance speaker directly. Its 2Vrms signal capability can provide a conventional line-level interface, and its 192kHz capability supports high-resolution sources when the complete amplifier chain preserves that performance. Flexible output selection is useful for multiple speaker zones, while analog volume control permits local attenuation. External power amplifiers remain necessary for loudspeaker drive, and the designer should confirm output drive capability, DC offset behavior, and idle-noise performance from the manufacturer data before selecting the codec.
추천
Multichannel Recording Interface
The WM8594SEFT/V is suitable for a multichannel recording interface when the system needs synchronized conversion and flexible selection among analog input and output paths. The 24-bit, 192kHz specification provides enough resolution and bandwidth for high-quality capture or monitoring, while digital and analog volume controls support gain staging. For recording equipment, the clock architecture is critical: the host clock, codec master clock, and serial-audio timing must meet the interface requirements in the manufacturer datasheet. Input routing and gain must also be evaluated together to preserve headroom and minimize distortion across the selected channel set.
추천
Gaming and Multimedia Console
The WM8594SEFT/V fits gaming consoles, streaming devices, and multimedia appliances that combine digital media playback with analog line-level outputs. Its 24-bit, 192kHz conversion capability can support high-resolution audio streams, while flexible channel selection and two forms of volume control help designers manage multiple output paths. Practical implementation requires careful separation of audio traces from switching regulators, high-speed clocks, and digital control buses. Follow the manufacturer application circuit for local decoupling and grounding, and verify whether the selected digital-audio interface supports the host processor's data width, frame format, and master-clock arrangement.
추천
추천 제품 요약
엔지니어링 참조 데이터: WM8594SEFT/V — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Cirrus Logic |
| Package | 48-pin TQFP, 7 mm x 7 mm |
| Product Type | Multi-channel audio codec |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Analog Signal Level | 2 Vrms |
| Input Selection | Flexible multi-channel selection |
| Output Selection | Flexible multi-channel selection |
| Digital Volume Control | Supported |
| Analog Volume Control | Supported |
주요 차별점
- High-resolution multi-channel conversion (vs WM8985CGEFL)
- Concurrent digital and analog gain control (vs WM8860GEFL/V)
- 2Vrms-oriented analog signal handling (vs WM8963ECSN/R)
설계 노트
Separate sensitive analog input and output routing from the digital-audio interface, clock lines, control bus, and switching-power nodes. Use the manufacturer application circuit as the basis for placement, and keep analog traces short with a continuous return path. Place local bypass capacitors at the associated supply pins rather than distributing them along the PCB edge. This prevents codec clock and regulator-switching energy from coupling into high-gain audio channels.
Confirm the supported digital-audio format, clock polarity, data timing, and master-clock arrangement before assigning the codec's serial interface. Route clock and data as a controlled group, provide a continuous ground reference, and avoid test pads or long stubs on sensitive nets. When the board also carries high-speed digital or switching circuitry, review return-current paths to keep codec clock jitter and analog noise within the system requirements.
Estimated thermal calculation: measure input power as VIN multiplied by total supply current, subtract output power, and treat the remainder as internal dissipation before applying the PCB-specific thermal resistance to estimate junction-temperature rise. Actual results depend on channel loading, output voltage, clocking, ambient temperature, and copper area. Confirm absolute maximum and recommended operating limits in the manufacturer datasheet before selecting regulators or capacitors.
Do not treat another 24-bit, 192kHz codec as a drop-in replacement merely because the headline specifications match. Verify every pin, the digital-audio protocol, master-clock requirements, control-register map, analog input range, output-drive capability, and power sequence. Software for the WM8594SEFT/V should not be assumed to operate another codec without a documented register and timing mapping.
규정 준수 정보
Compliance and qualification claims require confirmation from the manufacturer datasheet or the exact product documentation. The available listing identifies the part and its audio-codec specifications but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status.