AMD

XC2C64A-7VQG44I - 64-Macrocell 159MHz CPLD | AMD

부품 번호: XC2C64A-7VQG44I ✓ 활성
1.8 V Vdss VTQFP-44 Package 159 MHz Speed
MOQ: 1 |

XC2C64A-7VQG44I 개요

The AMD XC2C64A-7VQG44I is a 64-macrocell CoolRunner-II complex programmable logic device with a 159 MHz maximum operating frequency, 33 user I/O, and a 44-pin VTQFP package. It uses 0.18 µm CMOS technology with a 1.8 V core supply, combining programmable logic, in-system programmability, and a 6.7 ns speed designation in one compact surface-mount package.

A CPLD, or complex programmable logic device, is a programmable semiconductor that converts digital logic descriptions into fixed hardware interconnections. Within the product hierarchy, the XC2C64A belongs to the CoolRunner-II family of CPLDs, joining other programmable-logic devices and FPGAs used for control, interface, glue logic, and signal-processing functions. Unlike a microcontroller, a CPLD executes configured logic directly in hardware after programming.

The device provides 64 macrocells and approximately 1,500 logic gates for implementing combinational and sequential functions. Its 33 I/O pins support connections to external memory, control signals, displays, sensors, and communications circuitry. The -7 speed designation corresponds to a listed 6.7 ns propagation delay, while the 159 MHz figure describes the maximum operating frequency used when evaluating timing performance.

The 0.18 µm CMOS implementation and 1.8 V core operation place the XC2C64A in the CoolRunner-II architecture designed for low-voltage, high-density programmable logic. The manufacturer data sheet also identifies the device as an in-system-programmable CPLD, allowing configuration data to be loaded through the device's programming interface while the surrounding system is operating.

Typical applications include industrial control and data-acquisition modules, communications-interface logic, test equipment, embedded system support functions, display and keypad controllers, and general-purpose board glue logic. Its combination of 64 macrocells, 33 I/O, and a 44-pin package makes it useful when a design requires more logic than a small GAL or simple fuse-programmed device but does not need a larger FPGA.

Designers should preserve the package's exact pin assignments in the PCB library and follow the CoolRunner-II programming, decoupling, and termination guidance in AMD document DS311. Timing closure should use the speed-grade and I/O constraints appropriate to the selected clocking scheme rather than relying only on the 159 MHz headline frequency.

This page combines the manufacturer's CoolRunner-II technical information with package-aware replacement guidance, design notes, and application-focused selection criteria. These engineering resources help identify where the XC2C64A-7VQG44I fits, which same-package variants can simplify sourcing, and which design checks should be completed before layout release.

드롭인 대체품: XC2C64A-7VQG44I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC2C64A-7VQG44I (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Device Type, Package, RoHS Status, Configuration Memory.

AMD
Device Type: CoolRunner-II complex programmable logic device
Package: 44-pin VTQFP, 10 mm × 10 mm
비교 대상: XC2C64A-7VQG44I →
Xilinx
Process Technology: Advanced CMOS
Device Type: CoolRunner-II complex programmable logic device (CPLD)
Package: 44-pin VQFP
비교 대상: XC2C64A-7VQG44I →
Xilinx
Process Technology: 0.18 µm CMOS Flash
Device Type: CoolRunner-II complex programmable logic device (CPLD)
Package: 44-pin VTQFP, 10 mm × 10 mm
비교 대상: XC2C64A-7VQG44I →

XC2C64A-7VQG44C

✅ 드롭인
Xilinx
📦 VTQFP-44 (10 x 10 mm)
CoolRunner-II complex programmable logic device (CPLD) · 64 macrocells · 4 function blocks · 1,500 gates · 159 MHz · 4.6 ns · 15 µA minimum · 0.18 µm CMOS Flash

가격 문의

데이터시트 보기 →

XA2C64A-7VQG44I

✅ 드롭인
📦 VTQFP-44 (10 x 10 mm)
Same 64-macrocell, 33-I/O, -7 speed, and VTQFP-44 configuration; automotive-oriented ordering designation differs by up to 10% in application classification.

📋 참조 대체품 (카탈로그에 없음)

XC2C64A-6VQG44C

✅ 드롭인 ⚠️ 사양 미검증
📦 VTQFP-44 (10 x 10 mm)
Same 64-macrocell, 33-I/O, and VTQFP-44 configuration, but the -6 speed grade is approximately 16% slower than the -7 grade.

📋 참조 대체품 (카탈로그에 없음)

XC2C64A-5VQG44C

✅ 드롭인
AMD
📦 VTQFP-44 (10 x 10 mm)
CoolRunner-II complex programmable logic device · In-system programmable · 64 macrocells · 1.5K gates · 33 I/O pins · 159 MHz · 4.6 ns · 0.18 µm CMOS

가격 문의

데이터시트 보기 →

XA2C64A-5VQG44C

✅ 드롭인 ⚠️ 사양 미검증
📦 VTQFP-44 (10 x 10 mm)
Same 64-macrocell, 33-I/O, and VTQFP-44 configuration; automotive-oriented ordering and -5 speed combine a 30% speed difference with a grade distinction.

📋 참조 대체품 (카탈로그에 없음)

XC2C64A-7VQG44I 최대 정격 & 전기적 특성

Programmable Type In-System Programmable
Number of Macrocells 64 macrocells
Number of I/O 33 I/O
Logic Gate Count 1,500 gates
Maximum Operating Frequency 159 MHz
Propagation Delay 6.7 ns
Process Technology 0.18 µm CMOS
Core Supply Voltage 1.8 V
Device Family CoolRunner-II
Speed Grade -7
Package Type VTQFP-44
핀 수 44 pins
Package Dimensions 10 x 10 mm
실장 유형 Surface Mount
RoHS 상태 RoHS Compliant
Lead-Free Status Lead Free

XC2C64A-7VQG44I 10 x 10 mm 핀 구성 가이드

XC2C64A-7VQG44I(10 x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC2C64A-7VQG44I의 10 x 10 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC2C64A-7VQG44I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC2C64A-7VQG44I 적합 용도: 6 애플리케이션s: Industrial Control Logic, Data-Acquisition Interface, Communications Interface, Test and Measurement Equipment, Display and Keypad Controller, Board Glue Logic.

🏭

Industrial Control Logic

The XC2C64A-7VQG44I fits industrial control modules that require deterministic programmable logic close to sensors, relays, and actuators. Its 64 macrocells can implement state machines, interlocks, alarm handling, and signal conditioning, while 33 I/O provide a practical interface to field wiring and embedded controllers. The 159 MHz maximum operating frequency supports fast control paths without requiring a larger FPGA. For a -7 design, verify every timing path against the 6.7 ns propagation-delay specification and retain the exact AMD pin assignments in the 44-pin VTQFP footprint. Industrial temperature and EMC requirements should be confirmed against the selected device grade before production release.

📟

Data-Acquisition Interface

The XC2C64A-7VQG44I can coordinate digital data acquisition in instruments that combine analog front ends with FPGA-based or microcontroller-based processing. Its 33 I/O can handle sample-control signals, trigger routing, status flags, and programmable test sequences, while the 64 macrocells support counters, FIFO control, and timing state machines. The 159 MHz operating ceiling provides margin for synchronous control logic at practical system clock rates. Place the CPLD close to the acquisition circuitry to reduce control-loop propagation delay, and follow AMD DS311 for bypass capacitors, I/O standards, and pin constraints.

🌐

Communications Interface

The XC2C64A-7VQG44I is suitable for communications equipment that needs dedicated protocol framing, buffering, and control logic alongside a host processor. Its 33 I/O support parallel data paths, chip-select signals, and handshake lines, while 64 macrocells allow multiple finite-state machines to operate concurrently. The -7 speed grade and 159 MHz maximum frequency are useful for synchronous interface logic where predictable timing is important. Engineers should assign I/O standards according to the connected bus, add the required termination, and use AMD document DS311 to validate signal integrity, pin locations, and timing constraints.

🖥️

Test and Measurement Equipment

The XC2C64A-7VQG44I can implement sequencing, trigger, and instrument-control logic in test systems. Its 64 macrocells provide enough capacity for timing generators, pattern counters, status encoding, and communication adapters, while the 33 I/O interface with external fixtures and measurement hardware. The listed 159 MHz maximum frequency supports fast digital control and data organization. Layout should separate sensitive clock and data routing from switching nodes, and the implemented logic should be checked against the -7 timing constraints in AMD DS311 after synthesis and place-and-route.

📺

Display and Keypad Controller

The XC2C64A-7VQG44I can control displays, keypads, and human-interface logic in embedded equipment. Its 33 I/O are sufficient for parallel display segments, button scanning, indicators, and control signals, while the 64 macrocells can hold refresh counters, debounce logic, and display multiplexers. A 159 MHz device maximum gives substantial timing headroom for common scan-based interfaces. Engineers should define the pin assignment in the design tool, check the selected voltage standards, and keep the 44-pin VTQFP footprint aligned with the physical package orientation before fabrication.

🔧

Board Glue Logic

The XC2C64A-7VQG44I is useful for board-level glue logic that bridges processors, memories, sensors, and peripheral devices. It can implement arbitration, address decoding, reset distribution, interrupt handling, and protocol conversion without occupying a larger programmable-logic package. With 64 macrocells and 33 I/O, the device balances logic capacity against package size, and its 159 MHz maximum frequency supports common peripheral-clock rates. For dependable implementation, apply the recommended decoupling, preserve programming access, and verify all timing-critical paths using the selected speed grade and AMD DS311 constraints.

추천 제품 요약

XC2C64A-7VQG44C Xilinx 사용처: Industrial Control Logic, Data-Acquisition Interface, Communications Interface, Test and Measurement Equipment, Display and Keypad Controller, Board Glue Logic XA2C64A-7VQG44I Automotive-oriented ordering variant of the same logic architecture 사용처: Industrial Control Logic, Communications Interface XC2C64A-6VQG44C Lower-speed same-package CoolRunner-II variant 사용처: Industrial Control Logic, Communications Interface, Display and Keypad Controller, Board Glue Logic XC2C64A-5VQG44C AMD 사용처: Data-Acquisition Interface, Test and Measurement Equipment, Board Glue Logic
What is the XC2C64A-7VQG44I?
The XC2C64A-7VQG44I is a 64-macrocell CoolRunner-II complex programmable logic device with 33 I/O, a 159 MHz maximum operating frequency, and a 44-pin VTQFP package. According to AMD document DS311, it is an in-system-programmable CMOS CPLD using 0.18 µm technology and a 1.8 V core supply. It is intended for compact control, interface, and board-level logic implementations.
Where can I download the XC2C64A-7VQG44I datasheet PDF?
The official XC2C64A CoolRunner-II data sheet is available from AMD at https://docs.amd.com/v/u/en-US/ds311. AMD identifies the document as DS311 and it covers the XC2C64A device family, including its 64 macrocells, 33 I/O, 159 MHz operating frequency, 0.18 µm CMOS process, and 1.8 V core operation. Use DS311 for authoritative pin, timing, electrical, and programming information.
Where can I find the XC2C64A-7VQG44I pinout?
The XC2C64A-7VQG44I pinout is identified in AMD document DS311, which is the controlling source for the 44-pin VTQFP assignment. Use its package-pin table and pinout diagram when creating the PCB footprint and assigning I/O standards. Do not infer pin functions from the -7VQG44I suffix alone, because the Q identifier denotes the package configuration while individual pin functions belong to the device data sheet.
What are the key specifications of XC2C64A-7VQG44I that engineers should know?
The XC2C64A-7VQG44I combines 64 macrocells, 33 I/O, and a 159 MHz maximum frequency in a 44-pin VTQFP package. AMD document DS311 identifies it as an in-system-programmable, 0.18 µm CMOS CoolRunner-II device operating from a 1.8 V core. The listed 6.7 ns propagation delay identifies its -7 speed class. These figures define its logic capacity, routing interface, and timing target.
What can replace the XC2C64A-7VQG44I?
The closest same-package alternatives are XC2C64A-7VQG44C, XA2C64A-7VQG44I, XC2C64A-6VQG44C, and XC2C64A-5VQG44C. They retain the 44-pin VTQFP format and 64-macrocell architecture, while grade, temperature, or speed characteristics differ. Confirm the required temperature grade, automotive qualification, timing budget, and configuration compatibility before treating any of these as a replacement.
Is XC2C64A-7VQG44I the same as XC2C64A-7VQG44C?
The XC2C64A-7VQG44I and XC2C64A-7VQG44C share the XC2C64A family, -7 speed designation, 64-macrocell count, 33 I/O, and 44-pin VTQFP package. Their grade suffix differs, so they should not be treated as universally identical without reviewing the ordering table and temperature requirements in AMD document DS311. The distinction may determine whether one part is acceptable for industrial or automotive environmental requirements.
XC2C64A-7VQG44I vs XC2C64A-5VQG44C - which is better for timing-critical control?
Choose the XC2C64A-7VQG44I for timing-critical control because it is the -7 grade with a listed 6.7 ns propagation delay and 159 MHz maximum frequency. The XC2C64A-5VQG44C remains in the same 44-pin VTQFP family but belongs to the slower -5 grade. Its lower speed can increase the timing margin required by registered control logic, so confirm the post-route timing result before choosing it.
When should I choose XC2C64A-7VQG44I over XC2C64A-6VQG44C?
Choose XC2C64A-7VQG44I when the design benefits from the faster -7 timing grade, listed 6.7 ns propagation delay, and 159 MHz maximum frequency. Choose XC2C64A-6VQG44C when the slower grade is adequate and procurement priorities favor it. Because both use the same 64-macrocell architecture and 44-pin VTQFP package, the decisive factors are timing margin, qualification requirements, availability, and lifecycle support.
Is XA2C64A-7VQG44I suitable as an automotive replacement?
The XA2C64A-7VQG44I is the automotive-oriented same-package alternative identified for the XC2C64A-7VQG44I, retaining the 64-macrocell, 33-I/O, -7, and 44-pin VTQFP configuration. It should be considered for automotive programs only after its qualification records and environmental limits are checked. The XA prefix does not remove the need to review device-specific quality requirements and supplier documentation.
What is the best AMD equivalent for XC2C64A-7VQG44I?
The best AMD equivalent depends on whether the priority is timing, automotive qualification, or inventory continuity. XC2C64A-7VQG44C preserves the -7 speed class, XA2C64A-7VQG44I adds the automotive-oriented ordering designation, and XC2C64A-6VQG44C offers a lower-speed alternative in the same package. Compare the ordering information in AMD DS311 rather than treating every -7 or -6 suffix as electrically and environmentally identical.
What are the applications of the XC2C64A-7VQG44I?
The XC2C64A-7VQG44I is suitable for industrial control, data-acquisition, communications-interface, test-equipment, display-control, and general board-level logic applications. Its 64 macrocells provide substantially more logic capacity than simple GAL devices, while 33 I/O and the 44-pin VTQFP package limit the design to a relatively compact pin count. The 159 MHz maximum frequency supports common control and interface clocking requirements.
Does the XC2C64A-7VQG44I require special PCB layout practices?
The XC2C64A-7VQG44I requires a PCB footprint matching its 44-pin VTQFP package and compliance with the power, programming, and I/O guidance in AMD document DS311. Place required bypass capacitors close to their supply pins, preserve the pin-1 orientation, and use the documented programming interface for in-system configuration. Signal-integrity and termination decisions should follow the selected I/O standard and board-routing conditions.
Is the XC2C64A-7VQG44I RoHS compliant and lead-free?
The XC2C64A-7VQG44I is identified as RoHS Compliant and Lead Free in its product information. Those attributes support use in modern electronics manufacturing and contractual RoHS-sensitive programs. RoHS and lead-free status do not by themselves establish automotive qualification, conflict-minerals compliance, or suitability for a particular operating-temperature grade; those requirements should be reviewed separately.
How do I program the XC2C64A-7VQG44I?
Program the XC2C64A-7VQG44I through its in-system-programming interface using the programming procedure and device support specified in AMD document DS311. The device combines 64 macrocells with 33 I/O for configurable control and interface logic. Confirm the selected bitstream targets the exact XC2C64A device and package, then validate all I/O standards and timing constraints before programming production hardware.
Where can I buy XC2C64A-7VQG44I and what is its lead time?
Use the Request a Quote form on this page to request XC2C64A-7VQG44I pricing, current stock, minimum order quantity, and lead time. Quote requests should identify the exact 44-pin VTQFP ordering code XC2C64A-7VQG44I and any required production quantities. The current commercial conditions can then be confirmed for the intended shipment schedule and quality requirements.

엔지니어링 참조 데이터: XC2C64A-7VQG44I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC2C64A-7VQG44I when the design needs the -7 timing grade, a listed 159 MHz maximum frequency, and a 44-pin VTQFP footprint in an industrial-oriented ordering configuration. Select XC2C64A-7VQG44C when the same speed and package are needed but the C-grade ordering code better matches the program. Consider XA2C64A-7VQG44I for automotive-oriented sourcing after checking qualification requirements. XC2C64A-6VQG44C is appropriate when its lower timing grade still meets the clock and path constraints, while XC2C64A-5VQG44C should be selected only after post-route timing confirms adequate margin. All five candidates retain the 64-macrocell, 33-I/O VTQFP-44 format, allowing the same physical layout, but speed, grade, qualification, and environmental requirements must be reviewed before substitution.

대체품과의 비교

파라미터 이 제품 XC2C64A-7VQG44C XA2C64A-7VQG44I XC2C64A-6VQG44C XC2C64A-5VQG44C
Brand AMD AMD AMD AMD AMD
Package VTQFP-44 (10 x 10 mm) VTQFP-44 (10 x 10 mm) VTQFP-44 (10 x 10 mm) VTQFP-44 (10 x 10 mm) VTQFP-44 (10 x 10 mm)
Macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells
User I/O 33 I/O 33 I/O 33 I/O 33 I/O 33 I/O
Core Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V
Speed Grade -7 -7 -7 -6 -5
Programming Type In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable

주요 차별점

  • Faster timing grade than the lower-speed same-package options (vs XC2C64A-5VQG44C)
  • Maintains 159 MHz maximum operating frequency with 64 macrocells (vs XC2C64A-6VQG44C)
  • Same-package sourcing flexibility without changing the PCB footprint (vs XC2C64A-7VQG44C)
  • Industrial-oriented ordering option versus the automotive-designated variant (vs XA2C64A-7VQG44I)

설계 노트

Create the PCB footprint from the 44-pin VTQFP package drawing in AMD document DS311 and verify pin 1, pin numbering, pad dimensions, and exposed-area requirements against the mechanical drawing. Do not reuse a generic 44-pin footprint solely because its lead count matches. Check the assembled orientation and soldering process, then confirm that programming access and all I/O routes remain reachable within the routed board geometry.

Follow the core and I/O supply connection and decoupling requirements in DS311, including the applicable bypass capacitors and supply sequencing limits. Place each required capacitor immediately adjacent to its assigned power pin, with a short return path and a solid ground reference. Avoid sharing narrow supply traces between unrelated programmable-logic sections, and verify the assembled rail voltages against every I/O standard enabled in the design.

Assign I/O standards from the device data sheet rather than from board-level intuition. Match edge rates, drive strength, pull-up or pull-down requirements, and external termination to the connected device and trace topology. Keep clock routing short and away from noisy switching nodes, use a continuous reference plane, and review high-speed edges with the actual PCB stack-up. Programming and configuration pins also deserve clean routing because glitches or contention can affect initialization.

A common mistake is treating every XC2C64A suffix as interchangeable even though speed, temperature, and package identifiers encode different constraints. Another is relying on the 159 MHz maximum frequency without checking the actual routed path. Review the complete ordering table, constrain every clock domain, and run post-route timing analysis. The same 44-pin footprint enables substitution, but it does not guarantee identical qualification or environmental suitability.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

RoHS Compliant and Lead Free are identified for the XC2C64A-7VQG44I. REACH, halogen-free, and conflict-minerals status are not stated.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc2c64a 7vqg44i xc2c64a datasheet xc2c64a 7vqg44c xc2c64a 5vqg44c xc2c64a 7qfg48c xc2c64a 7cpg56c xc2c64a 7qfg48i xc2c64a 7cpg56i xc2c64a 7vqg100c XC2C64A-7VQG44I datasheet PDF XC2C64A-7VQG44I pinout XC2C64A-7VQG44I replacement XC2C64A-7VQG44I price XC2C64A-7VQG44I equivalent

관련 부품 & 용어

AMD Xilinx XC2C64A-7VQG44I XC2C64A-7VQG44C XA2C64A-7VQG44I XC2C64A-6VQG44C XC2C64A-5VQG44C CoolRunner-II CPLD Complex Programmable Logic Device programmable logic in-system programming macrocell 64-macrocell architecture VTQFP-44 QFN family surface-mount package SMD 0.18 µm CMOS 1.8 V core 159 MHz 6.7 ns propagation delay RoHS industrial control data-acquisition interface communications interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기