XC4VSX35-11FFG668C - Virtex-4 SX FPGA, 34560 Logic Cells | AMD
부품 번호: XC4VSX35-11FFG668C ✗ 단종XC4VSX35-11FFG668C 개요
A Virtex-4 SX FPGA is a programmable logic device in the broader FPGA and semiconductor hierarchy. Unlike fixed-function logic, an FPGA contains configurable lookup tables, registers, block RAM, dedicated multipliers, input/output blocks, and programmable interconnect. These resources allow designers to implement parallel data paths, control logic, protocol interfaces, DSP functions, and system-level verification logic in one device.
The XC4VSX35-11FFG668C provides 34,560 logic cells organized as 3,840 logic blocks. Its 90 nm CMOS implementation operates from a nominal 1.2 V supply, while the -11 designation identifies the device speed grade. The 668-ball FCBGA package supports dense board routing, but its large pin count and fine pitch require careful escape-routing, decoupling, thermal, and assembly planning.
Its architecture is suited to designs requiring substantial parallel computation. The device can support configurable logic, block memory, dedicated DSP arithmetic, clock management, and high-speed I/O within a single FPGA. The listed 1,205 MHz internal frequency is an important device-level characteristic, although actual system clock rates depend on the selected I/O standard, routing, timing constraints, logic utilization, and the targeted Xilinx design suite.
Typical uses include telecommunications line-card and baseband logic, industrial control and data acquisition, high-throughput digital filtering, network interface adaptation, instrumentation, and complex embedded systems. Engineers often pair this device with external memory, clock sources, transceivers, power controllers, and signal-conditioning components when implementing a complete system.
Power and signal-integrity design are critical because the 1.2 V core supply must remain within its specified operating limits while hundreds of I/O transitions create dynamic current demand. Place decoupling capacitance close to the supply and ground balls, provide adequate power-plane connectivity, and follow the package ball map and recommended reference-design layout. Use conservative thermal analysis based on actual synthesis utilization rather than assuming full-device switching activity.
This product page combines the verified device specifications with same-family drop-in candidates, package guidance, comparison parameters, and practical implementation notes. It helps engineers determine whether the XC4VSX35-11FFG668C matches the required logic capacity, speed grade, temperature range, package, and system constraints before starting board-level design work.
드롭인 대체품: XC4VSX35-11FFG668C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC4VSX35-11FFG668C (동일 폼 팩터 및 풋프린트) — 차이점: Package Type, Mounting Type, Speed Grade, Device Type, Operating Temperature.
XC4VSX35-10FFG668C
✅ 드롭인가격 문의
데이터시트 보기 →XC4VSX35-11FFG668I
✅ 드롭인가격 문의
데이터시트 보기 →XC4VSX35-11FFG668CS2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VSX35-10FFG668CS2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VSX35-11FF668C
✅ 드롭인가격 문의
데이터시트 보기 →XC4VSX35-11FFG668C 최대 정격 & 전기적 특성
| Device Type | Virtex-4 SX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 34,560 cells |
| Logic Blocks | 3,840 blocks |
| Internal Frequency | 1,205 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -11 |
| 동작 온도 | 0 °C to 85 °C |
| Package Type | 668-pin FCBGA |
| 핀 수 | 668 pins |
| Logic Family | CMOS |
| Die Code | 448 |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Pb-free |
XC4VSX35-11FFG668C 668-pin fcbga 핀 구성 가이드
XC4VSX35-11FFG668C(668-pin fcbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC4VSX35-11FFG668C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC4VSX35-11FFG668C 적합 용도: 6 애플리케이션s: Telecommunications Baseband Processing, Industrial Motion and Control, High-Speed Data Acquisition, Digital Signal Processing, Network Interface Adaptation, Embedded Instrumentation.
Telecommunications Baseband Processing
The XC4VSX35-11FFG668C fits parallel telecommunications baseband and line-card logic where substantial programmable datapaths are needed within one FPGA. Its 34,560 logic cells and 3,840 logic blocks can support filtering, symbol processing, control sequencing, protocol handling, and interface adaptation concurrently. The 1.2 V core supply and 668-pin FCBGA package also suit dense, high-speed boards with careful multilayer routing. Before selection, verify the required I/O standards, external memory interfaces, transceiver integration, timing margins, and worst-case power profile against the completed design.
추천
Industrial Motion and Control
The XC4VSX35-11FFG668C is appropriate for industrial motion-control and machine-control systems that combine deterministic sequencing with parallel signal processing. The 3,840 logic blocks and 34,560 logic cells can host control state machines, position-processing logic, encoder interfaces, diagnostics, and communication gateways. Its listed 0 to 85 °C operating range supports commercial industrial environments, while the -11 speed grade provides additional timing margin for demanding control paths. Final qualification should include environmental testing, grounding, isolation boundaries, thermal analysis, and timing closure for every external interface.
추천
High-Speed Data Acquisition
The XC4VSX35-11FFG668C can consolidate high-throughput data acquisition, digital filtering, and packetization into one Virtex-4 SX device. Its 34,560 logic cells support parallel sample-path logic, while configurable I/O can accommodate multiple interface standards when board-level voltage and timing requirements are satisfied. The 1.2 V core architecture helps limit switching-related power in a large 668-pin FCBGA package, although board planning must still account for I/O current and dynamic core activity. Use the manufacturer's pinout files to assign every ball and verify acquisition-clock jitter, acquisition latency, and output throughput during implementation.
추천
Digital Signal Processing
The XC4VSX35-11FFG668C suits parallel DSP architectures such as fixed-point filtering, correlation, modulation, and spectral processing. Its 34,560 logic cells and 3,840 logic blocks can implement multiple arithmetic pipelines, with dedicated FPGA resources used where supported by the selected design flow. The -11 speed grade can improve timing margin compared with the -10 option, but the realized sample rate remains constrained by pipeline depth, I/O timing, memory bandwidth, and routing. Validate arithmetic mapping, coefficient storage, clocking, and overflow behavior, and compare the device's power estimate against the target thermal envelope.
추천
Network Interface Adaptation
The XC4VSX35-11FFG668C is useful for legacy network-interface adapters that must translate between multiple data rates, widths, and protocols. Parallel engines can implement framing, buffering, rate conversion, error detection, and control logic while leaving dedicated I/O resources for external transceivers. The 668-pin FCBGA offers many physical connections for high-density board integration, but its fine pitch requires careful escape routing and strict power and ground distribution. Confirm protocol timing, packet buffer requirements, clock-domain crossings, line-rate interfaces, and interoperability before committing to the device for a production network appliance.
추천
Embedded Instrumentation
The XC4VSX35-11FFG668C can implement complex instrumentation logic that combines acquisition control, calibration, digital signal processing, local storage control, and host communication. Its 34,560 logic cells permit parallel measurement pipelines and sophisticated control sequencing, while the -11 grade supports timing-sensitive processing paths. The 1.2 V core supply must be generated with low-noise, high-current capability, and the 668-pin package requires deliberate thermal and via-in-pad or fanout-aware layout planning. Validate clock accuracy, trigger latency, isolation requirements, calibration storage, and instrument safety partitions in the complete system.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC4VSX35-11FFG668C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC4VSX35-10FFG668C | XC4VSX35-11FFG668I | XC4VSX35-11FFG668CS2 | XC4VSX35-10FFG668CS2 | XC4VSX35-11FF668C |
|---|---|---|---|---|---|---|
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX |
| Logic Cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells |
| Logic Blocks | 3,840 blocks | 3,840 blocks | 3,840 blocks | 3,840 blocks | 3,840 blocks | 3,840 blocks |
| Speed Grade | -11 | -10 | -11 | -11 | -10 | -11 |
| Internal Frequency | 1,205 MHz | 1,205 MHz | 1,205 MHz | 1,205 MHz | 1,205 MHz | 1,205 MHz |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Operating Temperature | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C |
주요 차별점
- Higher speed grade than the -10 replacement (vs XC4VSX35-10FFG668C)
- Industrial-temperature ordering option with identical listed core characteristics (vs XC4VSX35-11FFG668I)
- S2 processing designation with the same device architecture and capacity (vs XC4VSX35-11FFG668CS2)
설계 노트
Design the 1.2 V core rail for low noise and high transient current, and account separately for every enabled I/O voltage domain. Place the minimum recommended bypass capacitance directly against the relevant power and ground balls rather than distributing it around the board. Use the manufacturer's power-decoupling and package-ball guidance to determine values and placement. Because switching activity changes dynamic demand substantially, evaluate the rail with worst-case utilization and I/O activity rather than a nominal unloaded condition.
The 668-pin FCBGA requires a multilayer PCB with short, symmetric escape routes for supply, ground, clock, and high-speed interfaces. Keep layer transitions for each signal within the manufacturer's recommended via and return-path guidance, and avoid long stubs behind passive components. Maintain continuous reference planes wherever possible. Prototype the fine-pitch assembly with the exact stackup and land pattern, and inspect for bridging, tombstoning, voiding, and package coplanarity issues.
Estimate junction temperature from total core and I/O dissipation, the package thermal model, and the actual PCB thermal resistance. Spread heat through the ground-via array and adjacent copper while keeping sensitive analog or clock circuitry outside concentrated hot regions. Perform thermal analysis at the highest expected ambient temperature and maximum utilization. Use the completed power report for switching activity because using all 34,560 logic cells simultaneously would represent an unrealistic worst-case condition.
Assign clock, high-speed I/O, and sensitive control signals from the Virtex-4 package ball map and the design's timing constraints. Keep clocks away from noisy interfaces and use controlled-impedance routing for external high-speed links. Analyze source-synchronous, system-synchronous, and clock-domain-crossing interfaces separately, including external transceiver timing and board loss. Verify pin assignments for the selected I/O standard because the logical function and physical ball must both be valid in the chosen architecture.
규정 준수 정보
The exact MPN is identified as Pb-free, and the cross-reference record reports halogen-free compliance. No explicit RoHS, REACH, or conflict-minerals declaration was established for the exact MPN.