Xilinx

XC6SLX16-L1CSG225I - 14579-Cell Spartan-6 LX FPGA | Xilinx

부품 번호: XC6SLX16-L1CSG225I ✓ 활성
1 V Vdss 225-CSBGA (19 x 19 mm, 0.80 mm pitch) Package 667 MHz Speed
MOQ: 1 |

XC6SLX16-L1CSG225I 개요

The Xilinx XC6SLX16-L1CSG225I is a Spartan-6 LX field programmable gate array (FPGA) with 14,579 logic cells, 589,824 bits of block RAM and 160 user I/O, packaged in a 225-ball CSBGA (19 x 19 mm, 0.80 mm pitch, lead-free) that runs from a 1 V core supply in 45 nm CMOS. The -1L suffix identifies the low-power -1 speed grade, and the trailing I marks the industrial temperature version.

A field programmable gate array is a programmable logic semiconductor: an array of configurable logic blocks, block RAM, DSP slices and programmable I/O that is loaded at power-up with a bitstream defining the digital circuit. Within the market hierarchy, an FPGA sits above a fixed-function logic IC, above a CPLD, and inside the broader programmable-logic family. Spartan-6 LX devices occupy the cost-optimized, low-power segment of the Xilinx programmable logic portfolio, aimed at designs needing moderate logic density with high I/O count in a small package.

Key features of this device include a 667 MHz internal clock frequency, a -1L low-power speed grade, single-chip 45 nm CMOS construction, and 160 user I/O in only 225 balls of package area. The compact CSBGA-225 land pattern is a key differentiator over the FTG256 package used by many other Spartan-6 LX parts, saving roughly 30 percent of board area while keeping full-speed routing available. Industrial temperature operation supports factory, control, and instrumentation environments.

Technically, the device combines 14,579 logic cells with 589,824 bits of on-chip block RAM and a dedicated memory network, plus hard DSP multipliers for arithmetic pipelines. The 160 user I/O can be configured for LVCMOS 33, LVCMOS 18, LVCMOS 15, LVTTL and other standards, subject to bank-based voltage grouping. Because the part is a single monolithic die, there is no external configuration memory requirement beyond the standard serial or parallel bitstream loading interface.

Typical applications include industrial control and data acquisition front ends, compact video and image processing pipelines, low-power embedded networking and instrumentation, motor and motion control peripherals, and test and measurement front ends that need parallel data capture with low power consumption.

When designing around this device, remember that the CSG225 package demands tight ball-pitch escape routing, so plan power and ground planes and via-in-pad style escape strategy early. Confirm the -1L speed grade timing margin against your clock targets, and verify configuration pin states during power-up so the device enters the intended mode.

This page consolidates distributor availability, package-level drop-in alternatives, and practical design guidance that the factory datasheet alone does not present side by side, giving design engineers a faster path from part selection to a working board.

드롭인 대체품: XC6SLX16-L1CSG225I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC6SLX16-L1CSG225I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Speed Grade, Mounting Type, Operating Temperature, Package.

AMD
Device Type: Spartan-6 LX field-programmable gate array
Speed Grade: -2
Mounting Type: Surface-mount CSPBGA
비교 대상: XC6SLX16-L1CSG225I →
AMD
Device Type: Field Programmable Gate Array (FPGA)
Speed Grade: -2
Package: 225-LFBGA CSBGA, 0.8 mm pitch
비교 대상: XC6SLX16-L1CSG225I →
AMD
Device Type: Spartan-6 LX field-programmable gate array (FPGA)
Speed Grade: -3
Mounting Type: Surface-mount BGA
비교 대상: XC6SLX16-L1CSG225I →

XC6SLX16-2CSG225I

✅ 드롭인
AMD
📦 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
Field Programmable Gate Array (FPGA) · Spartan-6 LX · 14,579 cells · 1,139 CLBs · 24 multipliers · 144 I/O · 667 MHz · 45 nm CMOS

가격 문의

데이터시트 보기 →

XC6SLX16-2CSG225C

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
Spartan-6 LX field-programmable gate array · 14,579 cells · 589,824 bits · 160 I/O · 667 MHz · 45 nm CMOS · 225-ball CSPBGA · 225-LFBGA

가격 문의

데이터시트 보기 →

XC6SLX16-3CSG225C

✅ 드롭인
AMD
📦 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
Spartan-6 LX field-programmable gate array (FPGA) · 14,579 LE · 2,278 ALM · 576 Kbit · 589,824 bit · 160 I/O · 667 MHz · 45 nm

가격 문의

데이터시트 보기 →

XC6SLX16-L1CSG225C

✅ 드롭인
📦 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
identical die, package, -1L speed grade and 0 to 85 C range, differing only in the commercial temperature suffix versus the industrial marking

📋 참조 대체품 (카탈로그에 없음)

XA6SLX16-3CSG225I

✅ 드롭인
📦 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
automotive-grade -3 speed variant in the same 225-CSBGA footprint, roughly 50 percent faster than the -1L grade and with automotive qualification requirements

📋 참조 대체품 (카탈로그에 없음)

XC6SLX16-L1CSG225I 최대 정격 & 전기적 특성

Device Type Spartan-6 LX Field Programmable Gate Array (FPGA)
Logic Cells 14579 cells
Block RAM 589824 bits
User I/O 160 I/O
Process Technology 45 nm CMOS
Internal Clock Frequency 667 MHz
Core Supply Voltage 1 V
Speed Grade -1L (low-power -1 speed grade)
패키지 225-CSBGA (19 x 19 mm, 0.80 mm pitch)
Package Construction Lead-free CSPBGA / LFBGA
동작 온도 0 to 85 C (32 to 185 F)
실장 유형 Surface Mount
RoHS 상태 Lead-free package per manufacturer part data
Manufacturer Family Spartan-6 LX
Data Sheet Reference Spartan-6 FPGA Data Sheet: DC and Switching Characteristics (DS162)

XC6SLX16-L1CSG225I lead-free cspbga / lfbga 핀 구성 가이드

XC6SLX16-L1CSG225I(lead-free cspbga / lfbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC6SLX16-L1CSG225I의 lead-free cspbga / lfbga 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC6SLX16-L1CSG225I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC6SLX16-L1CSG225I 적합 용도: 6 애플리케이션s: Industrial Control and Data Acquisition Front End, Compact Video and Image Processing Pipeline, Low-Power Embedded Networking Node, Test and Measurement Front End, Motion Control and Motor Drive Peripherals, Battery-Powered Sensor and IoT Hub.

🏭

Industrial Control and Data Acquisition Front End

The XC6SLX16-L1CSG225I fits machine control panels that must sample many sensors while keeping standby power low. With 160 user I/O in a 225-ball CSBGA, a single device can host encoder inputs, discrete sensor channels, valve drivers and an isolation barrier interface without adding a second logic device. The -1L speed grade is specified for low static and dynamic power, which matters when the controller spends most of its life in a duty-cycled sleep state between measurement bursts. The 589,824 bits of block RAM hold sample buffers, and the 45 nm CMOS implementation at a 1 V core supply keeps thermal rise manageable in a sealed enclosure.

📺

Compact Video and Image Processing Pipeline

Video pipelines often need wide parallel capture and pixel manipulation rather than deep logic, which is exactly the profile of the XC6SLX16-L1CSG225I. The 160 user I/O can absorb a parallel RGB or YUV data bus from a video capture ASIC, while the 589,824 bits of block RAM provide line buffers and frame-rate pixel registers. The 225-CSBGA land pattern at 19 x 19 mm is significantly smaller than the 256-ball FTG256 alternative, which matters in camera modules and compact display boards. The -1L speed grade also limits switching power in battery or thermally constrained camera housings where radiated noise from fast switching is undesirable.

🌐

Low-Power Embedded Networking Node

Sensor nodes and industrial gateways that terminate one or more Ethernet or serial links are a natural fit for the XC6SLX16-L1CSG225I. The 160 I/O allow parallel PHY interfaces, MDIO management lines and UART or SPI channels to be serviced by one device, while 589,824 bits of block RAM hold packet buffers and protocol state. The low-power -1L grade is the key reason this part is preferred over faster variants in battery-backed telemetry nodes, because static and dynamic power scale directly with the speed grade selected. The 1 V core supply and 45 nm CMOS process simplify power tree design across a 3.3 V industrial input rail.

🔬

Test and Measurement Front End

Instrumentation front ends that must acquire wide parallel data and apply correction in real time benefit from the XC6SLX16-L1CSG225I combination of I/O count and fabric density. The 160 user I/O can be grouped into banks to accept TTL, LVCMOS and other logic levels directly from a DUT without level translation, and the block RAM acts as a deep capture FIFO between the acquisition logic and the serial link to the host. The -1L speed grade is appropriate for slow control-path and gating logic that sits alongside analog front ends, because the slower grade emits less switching noise that could couple into sensitive measurement paths through shared board ground planes.

🤖

Motion Control and Motor Drive Peripherals

The XC6SLX16-L1CSG225I can host the control law, encoder decoding and step/direction generation for a multi-axis motion controller while remaining a companion to a dedicated gate driver. The 160 user I/O cover quadrature encoder channels, limit inputs and pulse outputs without an external CPLD, and the 14,579 logic cells give headroom for proportional-integral-derivative loops and trajectory interpolation. Choosing the low-power -1L grade in equipment that runs continuously at moderate duty keeps thermal footprint low in sealed drive electronics. Note that the device does not replace the power stage itself; it complements it by providing deterministic timing and safety interlocks.

🧩

Battery-Powered Sensor and IoT Hub

Wearable and IoT hub designs that must aggregate several sensor streams while remaining on a small battery are well served by the XC6SLX16-L1CSG225I. The low-power -1L speed grade directly reduces switching loss at the modest clock rates typical of sensor aggregation, and the 225-CSBGA footprint at 19 x 19 mm keeps the board area close to the size of the sensor itself. The 160 I/O let a single device fan out I2C, SPI and GPIO lines to many peripheral sensors, while 589,824 bits of block RAM serve as a rolling data cache between sensor reads and wireless transmissions. The 0 to 85 C operating range suits consumer and indoor industrial housings.

추천 제품 요약

XC7A50T-L1CSG324I AMD 사용처: Industrial Control and Data Acquisition Front End XC4VLX25-12SFG363C Xilinx 사용처: Industrial Control and Data Acquisition Front End, Compact Video and Image Processing Pipeline XC7Z007S-1CLG225C AMD 사용처: Industrial Control and Data Acquisition Front End, Test and Measurement Front End, Battery-Powered Sensor and IoT Hub XC7A35T-1CSG324I Artix-7 step-up for higher resolution video timing 사용처: Compact Video and Image Processing Pipeline XC7A50T-L2CSG325E AMD 사용처: Compact Video and Image Processing Pipeline XC4VLX40-10FFG668I Xilinx 사용처: Low-Power Embedded Networking Node XC7A100T-1CSG325I Higher density for gateway aggregation 사용처: Low-Power Embedded Networking Node XC6SLX16-2CSG225I AMD 사용처: Low-Power Embedded Networking Node XC7A25T-L1CSG325E Step-up option for larger acquisition matrices 사용처: Test and Measurement Front End XC4VLX15-12SFG363C AMD 사용처: Test and Measurement Front End XC7A35T-1CSG324E More fabric for multi-axis safety logic 사용처: Motion Control and Motor Drive Peripherals XC4VLX15-11SFG363I Xilinx 사용처: Motion Control and Motor Drive Peripherals XC7A25T-L1CSG324I Mid-density option with margin for field upgrades 사용처: Motion Control and Motor Drive Peripherals XC4VLX15-10SFG363C AMD 사용처: Battery-Powered Sensor and IoT Hub XC6SLX16-L1CSG225C Same package and grade with commercial temperature suffix 사용처: Battery-Powered Sensor and IoT Hub
What are the key specifications of XC6SLX16-L1CSG225I that engineers should know?
The XC6SLX16-L1CSG225I is a 45 nm CMOS Spartan-6 LX FPGA with 14,579 logic cells, 589,824 bits of block RAM and 160 user I/O, packaged in a 225-ball CSBGA on a 19 x 19 mm, 0.80 mm pitch land pattern. It operates from a 1 V core supply with a 667 MHz internal clock frequency and carries the low-power -1L speed grade, with an operating temperature range of 0 to 85 C per the manufacturer part data. The same family and package options are cataloged as XC6SLX16 in the Xilinx Spartan-6 documentation, including the DS162 data sheet reference.
What is the operating temperature range of XC6SLX16-L1CSG225I?
The XC6SLX16-L1CSG225I operates from 0 to 85 C (32 to 185 F). The trailing I in the part number denotes the industrial temperature grade, while the C suffix in the related catalogued variants denotes the commercial range, so temperature grade is the primary functional difference between otherwise identical Spartan-6 LX parts. For designs deployed in cold industrial cabinets or automotive-adjacent enclosures, verify the chosen grade's junction and ambient limits against your worst-case corner before committing to the layout.
How many logic cells, I/O and block RAM does XC6SLX16-L1CSG225I have?
The XC6SLX16-L1CSG225I provides 14,579 logic cells, 160 user I/O and 589,824 bits of on-chip block RAM. The block RAM figure corresponds to the memory content available across the device's dedicated RAM columns, which can be combined into deeper dual-port or FIFO configurations depending on the block arrangement you choose in your project. With 160 I/O in a 225-ball package, most balls are user pins and the remainder carry configuration and power functions.
What is the difference between XC6SLX16-L1CSG225I and XC6SLX16-2CSG225I?
The main difference is the speed grade: XC6SLX16-L1CSG225I is the low-power -1L grade, while XC6SLX16-2CSG225I is the standard -2 grade, which is rated for roughly 25 percent higher performance. Both use the identical 225-CSBGA package and the same Spartan-6 LX die with 14,579 logic cells, so they are pin-compatible and PCB-interchangeable; the choice is purely about timing margin and power versus speed.
Is XC6SLX16-L1CSG225I suitable for a low-power industrial control design?
Yes, the XC6SLX16-L1CSG225I is a good fit for low-power industrial control designs because the -1L speed grade is specifically optimized for static and dynamic power at lower clock rates, and the 160 user I/O in a compact 225-ball CSBGA keeps board area small in space-constrained control panels. The 0 to 85 C operating range suits typical indoor factory environments. For designs that must run at maximum -2 or -3 timing, select the corresponding speed grade instead.
Where can I download the XC6SLX16-L1CSG225I datasheet PDF?
The authoritative documentation is the Spartan-6 FPGA Data Sheet: DC and Switching Characteristics, document ID DS162, available from the AMD developer documentation portal at https://docs.amd.com/v/u/en-US/ds162. It covers DC and switching characteristics for the whole Spartan-6 family, including the -1L speed grade used by the XC6SLX16-L1CSG225I. Package pinout files for Spartan-6 devices are published separately on the AMD package pinout resources page.
Where can I find the XC6SLX16-L1CSG225I pinout?
The 225-ball CSBGA pinout for the XC6SLX16-L1CSG225I is published in the AMD Spartan-6 package device pinout files at https://www.amd.com/en/developer/resources/adaptive-socs-and-fpgas/package-pinout-files/spartan-6-package-device-pinout-files.html, and the full pin description table with bank assignments is in the DS162 data sheet. Use that table when assigning PCB tracks, because with only 0.80 mm ball pitch the escape routing of 160 user I/O must follow the released package drawing exactly.
Where can I buy XC6SLX16-L1CSG225I online?
The XC6SLX16-L1CSG225I is offered by several authorized channels including DigiKey, Mouser and Avnet, with an Asian supply channel also listing the part. On this page you can submit the part number through the Request a Quote form to receive current pricing, stock position and lead time for the exact 225-CSBGA suffix you need. Quote requests are the fastest way to confirm allocation on this device, since Spartan-6 LX supply varies with speed grade and temperature suffix.
What is the price of XC6SLX16-L1CSG225I?
Pricing for the XC6SLX16-L1CSG225I changes with availability and volume, and the most current figures are published on this page as structured pricing rather than in static text. Use the Request a Quote form on this page for a unit price at your required quantity, including reel quantities for the 225-CSBGA package. Comparing the -1L suffix against -2 and -3 grades at the same quantity is worthwhile, because speed grade is the single largest cost driver in this family.
What is the lead time for XC6SLX16-L1CSG225I?
Lead time for the XC6SLX16-L1CSG225I depends on the speed grade and temperature suffix currently in distribution, and it is confirmed on a quote-by-quote basis. Request a Quote on this page and specify your required quantity and package shipping format so you receive a committed lead time along with the current allocation picture. For production programs, lock the -1L suffix and the 225-CSBGA package early in the schedule, because changing speed grade requires a timing re-validation of the design.
Is XC6SLX16-L1CSG225I in stock?
Stock status for the XC6SLX16-L1CSG225I fluctuates by region and by speed grade, so the live inventory count is shown alongside the quote form on this page. Submit a Request a Quote with your quantity and target ship date to receive a confirmed availability answer rather than a generic in-stock flag. The industrial -1L suffix is generally available more readily than the -3 speed grade, which is the tightest constrained variant of the Spartan-6 LX range.
When should I choose XC6SLX16-L1CSG225I over XC6SLX16-2CSG225I?
Choose the XC6SLX16-L1CSG225I when your design is clocked conservatively and power consumption matters more than maximum timing margin, since the -1L grade is the low-power member of the Spartan-6 LX speed range and is typically priced below the -2 option. Choose the -2 grade instead when your clock targets sit close to the device limit, when you need margin on external memory interfaces, or when the extra performance lets you remove an external component. The two are pin-compatible in the same 225-CSBGA footprint, so the decision is purely electrical and commercial.
What is the best drop-in replacement for XC6SLX16-L1CSG225I?
The best drop-in replacement is XC6SLX16-2CSG225I, which uses the identical 225-CSBGA package and the same Spartan-6 LX die with 14,579 logic cells and 589,824 bits of block RAM. The substitution requires that your design tolerate the higher performance and power draw of the -2 speed grade, and that the bitstream be re-validated against the new timing data in the DS162 data sheet. Board changes are not required since the ball pattern and power rails are identical.
Can XC6SLX16-2CSG225I replace XC6SLX16-L1CSG225I?
Yes, the XC6SLX16-2CSG225I can replace the XC6SLX16-L1CSG225I without any PCB modification, because both are the same Spartan-6 LX device in the same 225-CSBGA package with identical I/O count and supply rails. The only functional differences are the speed grade, where -2 is roughly 25 percent faster than the low-power -1L grade, and the resulting power and temperature behaviour. Re-run timing analysis and re-generate the bitstream for the new grade before releasing the update.
What can replace XC6SLX16-L1CSG225I?
Replacements for the XC6SLX16-L1CSG225I that keep the same 225-ball CSBGA land pattern are the other Spartan-6 LX speed and temperature variants of the XC6SLX16 device, namely XC6SLX16-2CSG225I, XC6SLX16-2CSG225C, XC6SLX16-3CSG225C, XC6SLX16-L1CSG225C and the automotive-qualified XA6SLX16-3CSG225I. Parts in other packages such as the 256-ball FTG256 or 324-ball CSG324 are not drop-in substitutes and require board rework, so verify the ball count and pin map before committing to any change.
Is XC6SLX16-L1CSG225I the same as XC6SLX16-2CSG225I?
No, they are the same Spartan-6 LX silicon family in the same 225-CSBGA package, but they are different speed grades: XC6SLX16-L1CSG225I is the low-power -1L grade and XC6SLX16-2CSG225I is the -2 grade. Aside from that difference the two share 14,579 logic cells, 589,824 bits of block RAM, 160 user I/O and a 1 V core supply. Treat them as pin-compatible but not functionally identical, and re-verify timing and power when moving between them.
Is there a cross-brand equivalent for XC6SLX16-L1CSG225I?
There is no true cross-brand drop-in equivalent for the XC6SLX16-L1CSG225I, because no other vendor offers a 225-ball CSBGA programmable logic device with a matching ball map, I/O arrangement and configuration interface. Competing families such as the Altera Cyclone and Lattice MachXO families use different package pinouts, different configuration schemes and different bitstream tools, so they represent a redesign rather than a substitution. If you need a second source, the same-brand XC6SLX16 speed and temperature variants in the CSG225 package are the practical path.
How do I migrate a Spartan-6 design to a different XC6SLX16 package?
When moving between XC6SLX16 packages, treat the change as a new pinout exercise rather than a swap. The CSG225, FTG256 and CSG324 packages expose different numbers of user I/O and place power and configuration balls differently, so the board must be re-routed and the design must be re-constrained against the new package pinout files published for Spartan-6 devices. The migration guidance in the manufacturer documentation recommends preserving the approved hardware revision, configuration revision and the source design record so each build remains traceable to a known baseline.

엔지니어링 참조 데이터: XC6SLX16-L1CSG225I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC6SLX16-L1CSG225I when your design needs the Spartan-6 LX feature set of 14,579 logic cells and 160 I/O but prioritizes low power and a compact 225-ball CSBGA footprint over maximum speed, and when the operating environment falls inside the 0 to 85 C range. Pick XC6SLX16-2CSG225I when timing margin against external memory or bus interfaces is tight, since the -2 grade adds about 25 percent performance at the cost of higher switching power. Pick XC6SLX16-3CSG225C when the design runs at the highest -3 performance class and the commercial temperature range is acceptable. Choose XC6SLX16-L1CSG225C when the temperature grade is the only differentiator. Choose XA6SLX16-3CSG225I only for automotive programs requiring automotive qualification. If your design exceeds 160 I/O or needs a different ball count, plan the FTG256 or CSG324 packages from the start, since those are not drop-in for this land pattern.

대체품과의 비교

파라미터 이 제품 XC6SLX16-2CSG225I XC6SLX16-2CSG225C XC6SLX16-3CSG225C XC6SLX16-L1CSG225C XA6SLX16-3CSG225I
Package 225-CSBGA (19 x 19 mm, 0.80 mm pitch) 225-CSBGA - same 225-CSBGA - same 225-CSBGA - same 225-CSBGA - same 225-CSBGA - same
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Logic Cells 14579 cells 14579 cells 14579 cells 14579 cells 14579 cells 14579 cells
Block RAM 589824 bits 589824 bits 589824 bits 589824 bits 589824 bits 589824 bits
User I/O 160 I/O 160 I/O 160 I/O 160 I/O 160 I/O 160 I/O
Speed Grade -1L (low-power -1) -2 -2 -3 (fastest) -1L (same) -3 automotive
Temperature Suffix I (industrial marking) I C (commercial) C (commercial) C (commercial) I (automotive program)
Process Technology 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS 45 nm CMOS
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V 1 V

주요 차별점

  • Smallest 225-ball Spartan-6 LX land pattern with full 160 I/O (vs XC6SLX16-2FTG256C)
  • Low-power -1L speed grade for thermally constrained designs (vs XC6SLX16-3CSG225C)
  • Drop-in speed-grade upgradation without PCB changes (vs XC6SLX16-2CSG225I)
  • Industrial temperature marking on the base speed grade (vs XC6SLX16-2CSG225C)

설계 노트

The 225-CSBGA land pattern uses a 0.80 mm ball pitch over a 19 x 19 mm body, which is tight enough that a two-layer board cannot realistically escape all 160 user I/O. Plan a 6 to 8 layer stack-up with a solid ground plane under the device, place decoupling capacitors on the same layer as the device where possible, and route high-speed nets on short inner layers to keep via counts low. Because Spartan-6 banks require clean reference planes, keep any plane split away from the device footprint itself.

The device runs from a 1 V core supply, so the power tree must generate that rail separately from the 3.3 V I/O supply and each must be decoupled close to its supply pins. Follow the decoupling guidance in the DS162 data sheet for the recommended capacitor values and placement, and remember that the -1L speed grade is chosen for low power, meaning the quiescent contribution of the device itself becomes a meaningful part of the budget. Estimated: at a 1 V core rail, a 200 mA design at 100 percent utilization dissipates roughly 0.2 W, which the 45 nm CSBGA can shed without a heatsink in still air.

Swapping between XC6SLX16 speed grades is a hardware-free change but never a configuration-free change. The bitstream timing model, the static and dynamic power figures and the derating curves all differ between -1L, -2 and -3, so re-run timing analysis and regenerate the bitstream for the exact suffix you fit. Another common mistake is assuming the 225-CSBGA parts are interchangeable with the FTG256 or CSG324 packages because the die is the same; the ball maps are different and require a board respin.

Spartan-6 uses a high-performance SelectIO structure, and bank voltage must match the external logic level of every pin in that bank. Plan bank boundaries in the constraint file before layout so that the ball assignment of each bank is fixed, then bring each bank its own quiet supply through the decoupling network rather than sharing a single rail with unrelated signals. For LVCMOS 33 outputs driving short PCB traces, drive strength and slew settings in the design tools will determine edge rate and the amount of crosstalk into adjacent high-impedance inputs such as the configuration pins.

Configuration pins are multifunction and their state during power-up determines whether the device enters serial, parallel or JTAG mode. Do not leave the configuration mode select pins floating, and make sure the pull-up or pull-down network on the INIT and DONE lines matches the intended boot mode, otherwise the device may enter configuration mode and fail to lock the design. Test points on CCLK, DATA and DONE are worth adding on production boards so a failed configuration can be diagnosed without rework.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer part data lists this device in a lead-free CSPBGA/LFBGA package. RoHS, REACH, halogen-free and conflict-minerals declarations are not stated in the sources for this part, so they are recorded as unknown. The XA6SLX16 automotive counterpart is the option to evaluate when AEC-Q100 qualification is required.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc6slx16-l1csg225i xc6slx16-l1csg225i datasheet xc6slx16 2csg225i xc6slx16 3csg225c xc6slx16 2ftg256c xc6slx16 ftg256 xc6slx16 3csg324i xc6slx16 2cpg196i xc6slx16 3ftg256i xc6slx16-l1csg225i pinout xc6slx16-l1csg225i replacement xc6slx16-l1csg225i equivalent xc6slx16-l1csg225i price xilinx spartan-6 lx16 csg225 fpga xc6slx16-l1csg225i csg225 package pinout

관련 부품 & 용어

Xilinx AMD XC6SLX16-L1CSG225I XC6SLX16-2CSG225I XC6SLX16-3CSG225C XC6SLX16-L1CSG225C XA6SLX16-3CSG225I Spartan-6 Spartan-6 LX FPGA field programmable gate array programmable logic CPLD logic cell block RAM SelectIO CSBGA-225 0.80 mm ball pitch 45 nm CMOS lead-free package battery-backed configuration industrial temperature grade DS162 LVCMOS 33 quiescent power speed grade
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기