XC6SLX45-2FG484C - 45K Logic Cell Spartan-6 FPGA | AMD
부품 번호: XC6SLX45-2FG484C ✓ 활성XC6SLX45-2FG484C 개요
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. In the product hierarchy, an FPGA is a programmable-logic device, an adaptive computing component, and a semiconductor. It offers more flexibility than a fixed-function application-specific integrated circuit while providing deterministic parallel hardware for control, signal processing, interface bridging, and data acquisition.
The XC6SLX45-2FG484C provides 43,661 logic elements organized into 6,822 adaptive logic modules, together with 2.04 Mbit of embedded block RAM. Its listed internal frequency is 500 MHz. These resources support parallel datapaths, state machines, protocol interfaces, and control logic without relying on a CPU for every real-time operation. The device also provides 316 available I/O sites according to the distributor data.
The -2 suffix identifies the Spartan-6 performance grade, while -3 devices provide a higher performance grade and -1L provides a lower-power-oriented option within the same family. The target operates from a listed 1.2 V supply. Its 45 nm CMOS construction and embedded-memory architecture allow multiple independent processing blocks to run concurrently, making deterministic throughput preferable to sequential software execution for time-critical control paths.
Typical uses include industrial automation, industrial networking, embedded control, instrumentation, consumer bridging, and automotive infotainment. The 316 I/O sites provide substantial connectivity for external memory, control signals, communications transceivers, and mixed-signal interfaces. The commercial 0°C to 85°C range is appropriate for indoor commercial and industrial equipment, while extended-temperature or automotive requirements should be checked against the exact selected ordering code.
Designers should verify the precise 484-ball footprint, pin assignments, exposed-pad connection, supported I/O standards, and memory interface compatibility in the AMD/Xilinx package data. The target designation in the verified results is also inconsistent, with some distributors listing FGG484C while the requested MPN and comparison sources use FG484C; the physical ball map and bill of materials should therefore be confirmed against the manufacturer documentation before layout release or procurement.
This page combines verified source specifications, commercial availability information, package details, comparison data, and practical replacement guidance. It also distinguishes confirmed same-package drop-in options from cross-reference leads that require additional package and temperature verification, helping engineers make a more reliable sourcing and design decision.
드롭인 대체품: XC6SLX45-2FG484C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC6SLX45-2FG484C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Speed Grade, Temperature Grade, Operating Temperature, Package.
XC6SLX45-2FG484I
✅ 드롭인가격 문의
데이터시트 보기 →XC6SLX45-3FG484I
✅ 드롭인가격 문의
데이터시트 보기 →XC6SLX45-2FG484C 최대 정격 & 전기적 특성
| Device Type | Spartan-6 LX field-programmable gate array (FPGA) |
| Logic Elements | 43,661 LE |
| Adaptive Logic Modules | 6,822 ALM |
| Embedded Memory | 2.04 Mbit |
| Internal Frequency | 500 MHz |
| I/O Sites | 316 I/O |
| Package Pins | 484 pins |
| 패키지 | 484-pin FBGA, 15 x 15 mm, 0.80 mm pitch |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 동작 온도 | 0°C to 85°C |
| Speed Grade | -2 |
| Temperature Grade | Commercial (C) |
| Logic Architecture | Adaptive Logic Module (ALM) FPGA |
| Lead-Free Termination | Lead-free package |
| Package Dimensions | 15 x 15 mm |
| Ball Pitch | 0.80 mm |
XC6SLX45-2FG484C 15 x 15 mm 핀 구성 가이드
XC6SLX45-2FG484C(15 x 15 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC6SLX45-2FG484C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC6SLX45-2FG484C 적합 용도: 6 애플리케이션s: Industrial Automation and Programmable Control, Industrial Networking and Protocol Bridging, Data Acquisition and Instrumentation, High-Speed Embedded Storage and Data Control, Consumer and Automotive Infotainment Bridging, High-Rate Communication Interface Consolidation.
Industrial Automation and Programmable Control
XC6SLX45-2FG484C fits industrial automation when a controller must execute multiple control tasks deterministically rather than relying only on sequential software. Its 43,661 logic elements and 6,822 adaptive logic modules can implement motion sequencing, interlocks, status decoding, and machine-control logic in parallel. The 2.04 Mbit embedded memory provides useful capacity for FIFO structures and local state, while 316 I/O sites simplify connection to sensors, actuators, encoders, and industrial interfaces. For equipment rated for indoor commercial and industrial environments, the specified 0°C to 85°C operating range is appropriate. Final qualification still requires confirmation of the exact C suffix, supported I/O standards, timing closure at the -2 speed grade, and the package’s power and ground-ball requirements.
추천
Industrial Networking and Protocol Bridging
XC6SLX45-2FG484C can serve as a configurable protocol-conversion and network-bridging engine when several serial interfaces and timing domains must be coordinated. The Spartan-6 LX architecture provides 43,661 logic elements for parallel packet processing, 2.04 Mbit of embedded block RAM for buffering, and 316 I/O sites for connecting digital transceivers. A -2-grade design can place framing, filtering, checksum, and flow-control logic beside the relevant I/O banks. This architecture can bridge industrial protocols without a CPU handling every packet. Engineers must still verify each transceiver’s voltage, signaling standard, and timing against the FPGA package, and must complete static timing analysis for the 500 MHz listed internal frequency rather than treating it as a guaranteed I/O rate.
추천
Data Acquisition and Instrumentation
XC6SLX45-2FG484C is suitable for parallel data-acquisition front ends that require real-time sampling, triggering, filtering, and data packing without a processor bottleneck. Its 43,661 logic elements can implement parallel acquisition pipelines, digital filters, counters, and control sequences, while 2.04 Mbit of embedded memory can buffer samples between acquisition and transfer stages. The 316 I/O sites allow direct connection to compatible digital sources and control logic. For instrumentation requiring precise external timing, use the FPGA to synchronize multiple channels and manage data-ready signals. Signal integrity, input thresholds, acquisition timing, and supported I/O standards must be validated at the board level, especially where analog converters are driven through high-speed interfaces.
추천
High-Speed Embedded Storage and Data Control
XC6SLX45-2FG484C can implement deterministic storage controllers, data sorters, or buffer managers where parallel logic must coexist with a memory interface. Its 6,822 ALMs and 2.04 Mbit of embedded memory offer a substantial programmable resource pool for address generation, ECC handling, burst sequencing, and read/write arbitration. The 316 I/O sites provide connections to compatible memory and data-processing components, while the -2 speed grade supports timing-oriented designs when properly constrained. Embedded-memory capacity should not be confused with external memory bandwidth; the achieved rate depends on the selected I/O standard, board topology, package assignment, and timing margin. Designers should also check whether dedicated hard memory controllers or an external controller provides a simpler implementation.
추천
Consumer and Automotive Infotainment Bridging
XC6SLX45-2FG484C can support programmable video, display, audio-data, or legacy-interface bridging in commercial infotainment prototypes. Its 43,661 logic elements allow several protocol engines and control paths to operate concurrently, and the listed 316 I/O sites provide broad connectivity for display timing, control signals, and external transceiver links. The commercial 0°C to 85°C range supports typical indoor environments, but it does not by itself establish suitability for harsh automotive locations. An automotive program should use the specifically qualified device and package variant identified in the manufacturer ordering guide. Power, EMC, video timing, and connector-routing requirements remain system-level constraints that must be tested before production use.
추천
High-Rate Communication Interface Consolidation
XC6SLX45-2FG484C is useful when several narrow communication interfaces need consolidation into a higher-bandwidth parallel data path. The FPGA’s 43,661 logic elements can host transmit and receive state machines, while its 2.04 Mbit of embedded memory supports packet buffering and clock-domain-crossing queues. A listed 500 MHz internal frequency provides a strong basis for parallel processing, but external interface rates remain dependent on I/O standards and timing closure. The 316 I/O sites permit organized placement of source-synchronous interfaces, although high-speed channels require careful package assignment and PCB layout. Clocking, impedance, return paths, and transceiver enable sequencing must be validated together to prevent intermittent communication errors.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC6SLX45-2FG484C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC6SLX45-2FG484I | XC6SLX45-3FG484I |
|---|---|---|---|
| Package | 484-pin FBGA, 15 x 15 mm | 484-pin FBGA, same package class | 484-pin FBGA, same package class |
| Brand | AMD | AMD | AMD |
| Device Series | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Elements | 43,661 LE | 43,661 LE | 43,661 LE |
| Adaptive Logic Modules | 6,822 ALM | 6,822 ALM | 6,822 ALM |
| Embedded Memory | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit |
| Speed Grade | -2 | -2 | -3 |
| Operating Temperature | 0°C to 85°C | 0°C to 85°C per verified LoveChip comparison | 0°C to 85°C per verified LoveChip comparison |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
주요 차별점
- Preserves the target’s -2 performance grade (vs XC6SLX45-3FG484I)
- Matches the verified commercial 0°C to 85°C range (vs XC6SLX45-2FG484I)
- Matches the Spartan-6 LX resource profile (vs XC6SLX45-2FG484I)
설계 노트
Do not release the layout from the generic 484-pin name alone. The verified source records alternate between XC6SLX45-2FG484C and XC6SLX45-2FGG484C, while other listings describe a 484-pin CSBGA designation with 324 pins. Download the package drawing associated with the exact ordering code, compare every ball location, and confirm the exposed-pad treatment. A mechanical match alone does not establish that power, ground, configuration pins, and user I/O have the same electrical assignments.
Plan the power rails from the exact device family datasheet and the selected package rather than using the listed 1.2 V core value alone. Decouple each supply domain according to the manufacturer’s recommended capacitance and placement, and provide clean auxiliary rails for configuration and internal voltage regulators where applicable. The supplied results do not include a complete power-up sequence or current-consumption table, so those values must remain marked as required design inputs until verified from the official documentation.
A speed-grade substitution changes more than marketing performance. Before using XC6SLX45-3FG484I in place of the -2 target, re-run synthesis, place-and-route, and static timing analysis, then verify configuration, I/O, power, and thermal behavior. The verified results do not provide the full -2-versus--3 timing or power table. Also verify the meaning of the I suffix against the AMD/Xilinx ordering guide rather than relying on distributor pages that use inconsistent FG, FGG, CSG, and package descriptions.
Assign high-speed interfaces to banks with suitable I/O capability and keep external drivers close to the corresponding FPGA pins. Use the manufacturer’s clocking and pin-placement guidance, control trace impedance on the PCB, and provide continuous return paths. Because the verified data lists 500 MHz as an internal frequency rather than a guaranteed I/O rate, external interface timing must be evaluated at the actual pin and board level. Bank-voltage compatibility also applies to every attached transceiver or converter.
규정 준수 정보
The verified FindIC record identifies the device as lead-free, but the supplied data does not explicitly establish RoHS, REACH, halogen-free, AEC-Q100, or conflict-minerals status. The commercial C ordering suffix is not, by itself, evidence of AEC-Q100 qualification.
