XC7K325T-L2FBG900I - 326,080-Cell Kintex-7 FPGA | AMD
부품 번호: XC7K325T-L2FBG900I ✓ 활성XC7K325T-L2FBG900I 개요
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and many analog or mixed-signal functions are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA supports design changes, parallel architectures, configurable I/O, and long product-tail support. The Kintex-7 family occupies the performance and capacity range between AMD's lower-density programmable-logic devices and larger system-on-chip devices.
The Kintex-7 architecture combines 326,080 logic cells with approximately 25,475 configurable logic blocks, as identified for the XC7K325T family. Its 500-I/O capability supports dense board-level connections, while 28 nm CMOS construction provides a useful balance between performance, logic density, and power. The FBG900 package exposes a very large pin count in a compact surface-mount footprint, although its ball array requires careful PCB layout, assembly control, and thermal management.
The -2L speed designation is a significant selection feature. AMD identifies Kintex-7 -2L devices as screened for lower maximum static power and capable of lower core voltage than -2 devices. This can benefit power-sensitive systems that still require strong general-purpose FPGA performance. The exact clock, I/O standards, power limits, and operating-temperature limits for the complete ordering code must be confirmed in the Kintex-7 data sheet and product-selection tables before release to manufacturing.
Typical uses include radar and signal-processing systems, industrial automation, test equipment, high-speed communications, video infrastructure, and aerospace or defense platforms. In each case, the large logic-cell count permits parallel datapaths, while the 500-I/O interface can reduce external component count when system partitioning permits. The -2L power profile is especially relevant where sustained utilization makes static and dynamic power important.
Design planning should focus on pin constraints, supported I/O standards, memory-interface requirements, clock topology, configuration resources, and thermal performance. A 900-ball BGA generally demands multilayer PCB construction, controlled impedance, dense via routing, and assembly processes qualified for the chosen package. Designers should also evaluate the newer Zynq and Versal families when software processors, adaptive SoC integration, or a current product roadmap is more important than Kintex-7 continuity.
This page consolidates the confirmed family-level device data, ordering-code details, practical package considerations, and same-package upgrade paths into an engineering-focused reference. It also identifies which FPGA and package details must be checked in AMD documentation before schematic release, PCB layout, or production sourcing.
드롭인 대체품: XC7K325T-L2FBG900I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7K325T-L2FBG900I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Core Voltage, Process Technology, Block RAM.
XC7K325T-2FBG900I
✅ 드롭인가격 문의
데이터시트 보기 →XC7K325T-3FBG900I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7K325T-1FBG900I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7K325T-L2FBG900C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7K325T-2FBG900C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7K325T-L2FBG900I 최대 정격 & 전기적 특성
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Programmable Logic Cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 CLBs |
| Technology | 28 nm CMOS |
| Core Voltage | 1 V |
| I/O Count | 500 I/O |
| 패키지 | FBG900, 900-ball flip-chip BGA |
| Package Pin Count | 900 balls |
| Speed Grade | -2L |
| Supported Kintex-7 Speed Grades | -3, -2, -1, -1L, and -2L |
| -2L Static-Power Feature | Screened for lower maximum static power |
| -2L Core-Voltage Feature | Can operate at lower core voltage than -2 devices |
| Maximum Performance Grade | -3 speed grade |
| 실장 유형 | Surface mount |
| Package Code | FBG900 |
| Terminal Count | 900 terminals |
XC7K325T-L2FBG900I fbg900 핀 구성 가이드
XC7K325T-L2FBG900I(fbg900 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7K325T-L2FBG900I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7K325T-L2FBG900I 적합 용도: 6 애플리케이션s: Industrial Digital Signal Processing, Communications and Network Equipment, Radar and Test Instrumentation, Aerospace and Defense Systems, Video and Image Processing, High-Performance Embedded Control.
Industrial Digital Signal Processing
The XC7K325T-L2FBG900I fits industrial signal-processing systems that combine parallel filtering, control logic, and extensive external connectivity. Its 326,080 programmable logic cells provide substantial capacity for parallel datapaths, while approximately 500 I/O support multiple converters, memory devices, communication links, and control signals. The -2L grade is useful when the system must reduce static power or operate at a lower core voltage than a conventional -2 design. In implementation, engineers should reserve I/O for the required voltage standards, validate timing at the intended speed, and model thermal behavior across industrial temperature conditions. The FBG900 package requires a multilayer PCB and careful power, ground, and ball-escape planning.
추천
Communications and Network Equipment
XC7K325T-L2FBG900I is suitable for communications infrastructure requiring parallel data processing, protocol acceleration, and a high pin count. Approximately 500 I/O allow designers to aggregate multiple data paths and interface memories or transceivers without splitting the design across several smaller programmable devices. The 326,080-cell Kintex-7 resource level can support substantial datapaths, while the -2L profile offers a route to lower core-voltage operation for power-conscious deployments. Engineering teams must verify each transceiver's supported I/O standard, impedance, voltage, and timing constraints against the Kintex-7 documentation. PCB implementation should use controlled-impedance routing, sound return paths, and power planes sized for both logic activity and configuration requirements.
추천
Radar and Test Instrumentation
The XC7K325T-L2FBG900I can serve as the central programmable engine in radar, electronic instrumentation, and automated test systems. Its 326,080 logic cells allow multiple acquisition, correlation, filtering, and control blocks to operate in parallel, while the 500-I/O interface connects converters, clocks, memory, and trigger systems. The -2L grade may reduce power when a lower core voltage closes timing, which is valuable in compact or thermally constrained chassis. Designers should establish clocking, acquisition latency, and deterministic I/O constraints before implementation, then verify them with the selected device speed grade. A 900-ball FBGGA also demands assembly planning for component placement, reflow profile, underfill where required, and X-ray inspection of hidden joints.
추천
Aerospace and Defense Systems
XC7K325T-L2FBG900I is applicable to aerospace and defense platforms requiring reconfigurable logic, high I/O density, and controlled static-power behavior. The 326,080-cell device can support redundant datapaths, navigation processing, communications control, and programmable I/O within a single package. Because the -2L grade is screened for lower maximum static power and can operate at lower core voltage, it may fit systems where long-duration standby or thermally constrained operation is important. Qualification for a specific airborne program must be confirmed independently; the generic industrial I suffix does not by itself establish program approval. Designers should review radiation, temperature, power, and configuration requirements against the appropriate AMD documentation and program-specific qualification records.
추천
Video and Image Processing
The XC7K325T-L2FBG900I is well matched to video infrastructure, image processing, and display systems that benefit from parallel pixel pipelines and high external connectivity. Its 326,080 logic cells can accommodate multiple parallel channels, while approximately 500 I/O support video interfaces, memory devices, and control logic. Selecting the -2L grade can enable lower core-voltage operation when timing permits, potentially reducing power in always-on processing platforms. Engineers should divide the design into timing-constrained pipelines, budget block RAM and routing resources, and confirm that every video interface uses a supported I/O standard and voltage. The large BGA package requires particular attention to signal integrity, layer transitions, return paths, and independent power distribution around high-speed interfaces.
추천
High-Performance Embedded Control
XC7K325T-L2FBG900I can implement high-performance embedded control when a fixed microcontroller is insufficient and deterministic parallel hardware is valuable. The large logic-cell count supports dedicated acquisition, motion, fault-management, and real-time control blocks, while approximately 500 I/O connect sensors, actuators, memory, and industrial communication interfaces. The -2L power profile is useful in compact embedded platforms where reducing core voltage can lower heat and improve reliability. Engineering work should separate hard-real-time logic from supervisory functions, define clock-domain boundaries, and create a power plan that accounts for static and dynamic consumption. Firmware, HDL, constraints, and configuration files must be version-controlled together, with timing and power sign-off performed for the exact -2L ordering code.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7K325T-L2FBG900I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7K325T-2FBG900I | XC7K325T-3FBG900I | XC7K325T-1FBG900I | XC7K325T-L2FBG900C | XC7K325T-2FBG900C |
|---|---|---|---|---|---|---|
| Package | FBG900 (900-ball flip-chip BGA) | FBG900 (900-ball flip-chip BGA) | FBG900 (900-ball flip-chip BGA) | FBG900 (900-ball flip-chip BGA) | FBG900 (900-ball flip-chip BGA) | FBG900 (900-ball flip-chip BGA) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Device Configuration | XC7K325T | XC7K325T | XC7K325T | XC7K325T | XC7K325T | XC7K325T |
| Speed Grade | -2L | -2 | -3 | -1 | -2L | -2 |
| Programmable Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| I/O Count | Approximately 500 I/O | Approximately 500 I/O | Approximately 500 I/O | Approximately 500 I/O | Approximately 500 I/O | Approximately 500 I/O |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Power Profile | -2L screened for lower maximum static power and lower core-voltage operation | Standard -2 profile | Highest-performance -3 profile | Standard -1 profile | -2L lower-static-power profile | Standard -2 profile |
주요 차별점
- Lower-power -2L performance profile (vs XC7K325T-2FBG900I)
- Industrial-temperature ordering option (vs XC7K325T-L2FBG900C)
- Power-sensitive design choice within one package (vs XC7K325T-3FBG900I)
- High logic density with extensive I/O (vs XC7K325T-1FBG900I)
설계 노트
Treat the FBG900 footprint as a demanding dense-BGA layout rather than a conventional perimeter package. AMD's Kintex-7 package pinout files and UG475 should define every ball assignment and escape route. Use a multilayer board with short, length-matched escape paths where interface timing requires it, provide adequate via-in-pad or via-fanout according to the assembly process, and maintain continuous return paths beneath high-speed signals. Do not substitute a symbol or footprint from another FBG900 device without checking its exact package drawing and ball map.
Create the power-distribution network from the device-specific Kintex-7 power and decoupling recommendations rather than from generic FPGA guidance. Separate core, auxiliary, and I/O supply concepts as required by the selected architecture, and verify rail sequencing and voltage tolerances against the exact -2L device table. Because -2L devices can operate at lower core voltage than -2 devices, confirm the intended voltage with post-place-and-route timing and power analysis. Estimate total dissipation from the actual activity factor and rails before sizing regulators, copper planes, and thermal paths.
Estimated design practice: begin with the power value produced by the final AMD power report, then apply the PCB thermal model for the actual stack-up, copper area, airflow, and ambient temperature. Check both maximum junction temperature and the aging margin of the selected package. A 900-ball BGA can distribute heat across many solder joints, but hidden solder defects may reduce effective thermal and electrical performance. Plan X-ray inspection and process controls for high-reliability production rather than relying only on visual inspection.
Validate every external interface against the selected Kintex-7 I/O standard, voltage, drive strength, and timing limits. For DDR or other source-synchronous interfaces, use the device-specific package and PCB guidance to control skew, provide a continuous reference plane, and select termination values through simulation or measured SI analysis. The approximately 500-I/O capacity can encourage dense routing, so preserve spacing between high-speed, high-slew nets and sensitive inputs. Configuration pins and dedicated pins must follow their prescribed connection rules.
Do not treat parts with similar Kintex-7 names as interchangeable without decoding every ordering-code field. The speed grade changes timing and power behavior, while the C and I suffixes identify different temperature ranges; the FFG and FBG package families also have different ball counts and pinouts. Before releasing a substitute, compare the complete AMD part table, rerun timing, verify configuration compatibility, and repeat the PCB and thermal review. A package match alone does not establish production equivalence.
규정 준수 정보
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. The I suffix denotes the industrial-temperature grade, but it does not establish AEC-Q100 qualification by itself.