AMD

XC7K70T-1FBG484I - 65,600-Cell Kintex-7 FPGA | AMD

부품 번호: XC7K70T-1FBG484I ✓ 활성
1 V Vdss 484-pin lidless FCBGA Package 1,098 MHz Speed
MOQ: 1 |

XC7K70T-1FBG484I 개요

The AMD XC7K70T-1FBG484I is a Kintex-7 field-programmable gate array built on a 28 nm CMOS process, providing 65,600 programmable logic cells, 5,125 configurable logic blocks, and 185 user I/O in a 484-pin lidless FCBGA package. It belongs to the Xilinx 7 Series FPGA family and combines programmable logic, fixed hard blocks, DSP resources, block RAM, high-speed I/O, clocking, and memory interfaces in one configurable device.

A field-programmable gate array is a digital semiconductor whose internal circuit connections and logic functions can be configured after manufacture. In the technology hierarchy, an FPGA is a programmable logic device, which sits above simple programmable logic arrays and CMOS application-specific integrated circuits. Kintex-7 devices occupy the middle-to-upper performance range of the 7 Series portfolio, balancing substantial logic capacity against relatively low power per logic cell for communications, industrial, defense, test, and embedded-processing systems.

The target device offers 65,600 logic cells organized into 5,125 CLBs, along with dedicated block RAM, DSP48 slices, clock-management resources, and high-speed serial transceivers. The listed operating maximum is 1,098 MHz. The FBG484 package provides 484 physical contacts and supports 185 user I/O according to the product listing. Its industrial temperature designation identifies the -1 speed grade combined with an extended-temperature option for systems that require dependable operation across a wider environmental range.

The Kintex-7 architecture supports parallel and serial interfaces commonly found in embedded systems, including Ethernet, PCIe, memory, and high-speed interconnect designs. Programmable logic resources can implement protocol bridges, packet processors, control logic, and custom accelerators, while DSP slices accelerate fixed-point and floating-point arithmetic. Dedicated block RAM reduces the need for external memory in designs with moderate on-chip buffering requirements.

Typical XC7K70T-1FBG484I applications include industrial control, networking equipment, test and measurement instruments, communication infrastructure, high-performance embedded processing, and FPGA-based signal-processing systems. The large I/O count is useful for parallel data acquisition and control, while the serial transceivers support high-speed links. The device is especially appropriate when deterministic parallel-to-serial conversion, protocol handling, and custom digital logic must coexist on one board.

PCB implementation requires careful attention to the 484-ball FCBGA escape routing, power delivery, clock integrity, and high-speed signal integrity. The power rails must be decoupled according to the AMD/Xilinx pinout and power-guidance documentation, while transceiver and memory interfaces require controlled impedance and length matching. Configuration storage, startup sequencing, thermal management, and JTAG debugging also need to be included in the complete board design.

This product record combines the exact XC7K70T-1FBG484I identity, package and resource information with practical replacement guidance. The comparison and selection material focuses on genuine FBG484 drop-in options, while the design notes address the power, routing, clocking, and configuration considerations that determine whether a high-performance FPGA can operate reliably on a dense multi-layer PCB.

드롭인 대체품: XC7K70T-1FBG484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7K70T-1FBG484I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Logic Cells, Process Technology, Device Type, Temperature Grade.

AMD
Package: 484-ball FCBGA (FB484)
Logic Cells: 65,600
Process Technology: 28 nm HKMG (CMOS)
비교 대상: XC7K70T-1FBG484I →
AMD
Package: 484-pin FCBGA lidless (FB484)
Logic Cells: 65,600
비교 대상: XC7K70T-1FBG484I →
AMD
Package: 484-BBGA, FCBGA
Process Technology: 28 nm
Device Type: Kintex-7 Field Programmable Gate Array (FPGA)
비교 대상: XC7K70T-1FBG484I →
AMD
Process Technology: 28 nm
Device Type: Kintex-7 Field-Programmable Gate Array (FPGA)
Temperature Grade: C
비교 대상: XC7K70T-1FBG484I →

XC7K70T-2FBG484I

✅ 드롭인
📦 FBG484
Uses the -2 speed grade instead of -1 while retaining 65,600 logic cells, the Kintex-7 architecture, industrial-temperature designation, and FBG484 footprint.

📋 참조 대체품 (카탈로그에 없음)

XC7K70T-1FBG484C

✅ 드롭인
AMD
📦 FBG484
Kintex-7 Field Programmable Gate Array (FPGA) · 65,600 cells · 285 I/Os · 400 MHz · 0.970 V to 1.03 V · 28 nm · 10.3125 Gbps · 484-BBGA, FCBGA

가격 문의

데이터시트 보기 →

XC7K70T-2FBG484C

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 FBG484
Kintex-7 Field-Programmable Gate Array (FPGA) · 65,600 cells · 28 nm · 285 I/Os · 484-pin FCBGA · FBG484 · 1.00 mm · 23 mm x 23 mm

가격 문의

데이터시트 보기 →

XC7K70T-1FBG484I 최대 정격 & 전기적 특성

Device Type Kintex-7 Field-Programmable Gate Array
Logic Cells 65,600 cells
Configurable Logic Blocks 5,125 CLBs
최대 클록 주파수 1,098 MHz
User I/O 185 I/O
Process Technology 28 nm CMOS
공급 전압 1 V
패키지 484-pin lidless FCBGA
Package Pin Count 484 pins
실장 유형 Surface mount
Programmable Logic FPGA configurable logic
AEC-Q100 Qualification not_applicable

XC7K70T-1FBG484I 484 pins 핀 구성 가이드

XC7K70T-1FBG484I(484 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7K70T-1FBG484I의 484 pins 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7K70T-1FBG484I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7K70T-1FBG484I 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Industrial Networking Equipment, Test and Measurement Instrumentation, Communications Infrastructure, High-Performance Embedded Processing, Aerospace and Defense Systems.

🏭

Industrial Control and Automation

The XC7K70T-1FBG484I fits industrial controllers that combine parallel machine I/O, real-time logic, and communication protocols. Its 65,600 logic cells and 185 user I/O allow engineers to consolidate motion control, sensor conditioning, interlocks, and data acquisition into one programmable device. Dedicated DSP48 and block RAM resources can accelerate filtering or control algorithms without relying exclusively on an external processor. The -1 speed grade supports demanding timing paths, while the industrial-temperature designation suits equipment operating across a wider ambient range.

🌐

Industrial Networking Equipment

The XC7K70T-1FBG484I is appropriate for Ethernet, protocol-conversion, packet-processing, and network-interface equipment because its programmable logic can implement multiple traffic paths while dedicated transceivers handle high-speed serial links. The 185 user I/O provide ample parallel connectivity for line cards, status indicators, management signals, and physical-layer interfaces. The -1 speed grade improves timing margin in multi-gigabit designs, although board-level signal integrity, reference-clock quality, and transceiver configuration remain critical to reliable link operation.

🖥️

Test and Measurement Instrumentation

The XC7K70T-1FBG484I supports instrument architectures that require deterministic acquisition, timing generation, pattern processing, and a high density of control connections. Its 65,600 logic cells can implement multiple acquisition channels, while block RAM provides local buffering and DSP48 slices can accelerate filtering and waveform calculations. The 185 user I/O simplify parallel front-end integration, and the -1 grade is useful for timing-sensitive measurement paths. Calibration, clock distribution, and analog-to-digital converter synchronization must be validated at the system level.

🌐

Communications Infrastructure

The XC7K70T-1FBG484I fits communications infrastructure requiring high-throughput programmable logic, dedicated serial connectivity, and flexible protocol support. Engineers can implement channelized traffic processing, timing, monitoring, and line-rate interface logic around the Kintex-7 hardware resources. The 185 user I/O provide physical-layer and control connectivity, while the 5,125 CLBs provide substantial capacity for parallel-to-serial architectures and low-latency data paths. Production designs must account for reference-clock jitter, power integrity, thermal rise, and the device's -1 timing grade.

⚡

High-Performance Embedded Processing

The XC7K70T-1FBG484I can implement hardware-assisted embedded workloads when a microcontroller or processor alone cannot meet real-time or I/O-density requirements. Programmable logic can accelerate filters, protocol handlers, and data movement while the FPGA acts as a deterministic front end to external processors and memory. Its 65,600 logic cells, dedicated DSP blocks, and 185 user I/O allow substantial functions to be consolidated. Designers should partition the design carefully, include timing constraints, and verify that replacing the original device with a different speed grade does not violate clock constraints.

✈️

Aerospace and Defense Systems

The XC7K70T-1FBG484I can support FPGA-based avionics, mission-processing, simulation, and rugged embedded-control architectures that benefit from configurable logic and extensive I/O. Its -1 speed grade provides additional timing margin, while the I suffix identifies the industrial-temperature option rather than an aerospace-qualified grade. Engineers must therefore verify the applicable environmental and qualification requirements separately. Configuration reliability, radiation effects, secure programming, supply-chain provenance, and long-term program-device support should be addressed before using the device in safety-critical applications.

What are the key specifications of XC7K70T-1FBG484I that engineers should know?
The XC7K70T-1FBG484I is a 65,600-cell Kintex-7 FPGA built on a 28 nm CMOS process, with 5,125 CLBs, 185 user I/O, a listed maximum frequency of 1,098 MHz, and a 484-pin lidless FCBGA package. According to the AMD/Xilinx Kintex-7 datasheet, it combines programmable logic, DSP48 resources, block RAM, clock management, and serial transceivers. The -1 speed grade favors performance, while the I suffix identifies the industrial-temperature option.
What is the operating voltage and process technology of XC7K70T-1FBG484I?
The XC7K70T-1FBG484I operates at 1 V and is manufactured using 28 nm CMOS technology. The product record identifies the device as a Kintex-7 FPGA with 65,600 logic cells and 5,125 CLBs. Its package contains 484 contacts and supports 185 user I/O. Actual board-level rails, tolerances, sequencing, and decoupling must follow the AMD/Xilinx power-supply guidance rather than treating the nominal 1 V figure as the only board requirement.
Where can I download the XC7K70T-1FBG484I datasheet PDF?
The XC7K70T-1FBG484I datasheet PDF can be accessed through the product documentation link on this page, with an additional manufacturer-family reference available from AMD. The document covers the Kintex-7 architecture, package pinout, electrical characteristics, configuration requirements, clocking, memory interfaces, and package information. Use the exact FBG484 package drawing and UG475 when assigning PCB balls and escape routes.
Where can I find the XC7K70T-1FBG484I FBG484 pinout?
The XC7K70T-1FBG484I pinout is identified by its 484-pin lidless FCBGA package and is documented in the AMD Kintex-7 package pinout files and the corresponding device datasheet. Use those package files when assigning ball locations, power rails, configuration pins, clock inputs, and user I/O. Confirm the exact XC7K70T-1FBG484I ordering code because other Kintex-7 speed, temperature, and package combinations do not necessarily use the same ball assignment.
XC7K70T-1FBG484I vs XC7K70T-2FBG484I: which is better for high-speed processing?
The XC7K70T-1FBG484I is the better choice when the highest listed speed grade matters, while the XC7K70T-2FBG484I provides a lower-cost or potentially longer-life configuration. Both use the Kintex-7 device family and the 484-pin FCBGA package format, but the numeric suffix identifies different speed grades. The comparison page identifies 65,600 logic cells for both parts. Final timing closure must be checked against the selected speed grade and design constraints.
When should I choose XC7K70T-1FBG484I over XC7K70T-2FBG484I?
Choose the XC7K70T-1FBG484I when using the -1 performance grade is necessary for timing closure, processing throughput, or an established reference design. Consider the XC7K70T-2FBG484I when its lower speed grade still meets timing and supply priorities favor a less aggressive performance tier. Both retain the Kintex-7 resource architecture and FBG484 footprint, so the decision is primarily speed-grade, availability, lifecycle, and qualification needs.
Is XC7K70T-1FBG484I suitable for industrial control and embedded systems?
Yes, the XC7K70T-1FBG484I is suitable for industrial control and embedded systems that need deterministic programmable logic, substantial I/O, and dedicated FPGA resources. Its 65,600 logic cells, 185 user I/O, DSP48 blocks, and block RAM support control logic, signal conditioning, protocol conversion, and local data processing. The I suffix denotes an industrial-temperature option, but the complete system must still verify ambient temperature, power dissipation, and enclosure conditions.
What can replace XC7K70T-1FBG484I as a drop-in alternative?
The XC7K70T-2FBG484I is the closest same-package alternative because it retains the Kintex-7 architecture, 65,600 logic cells, and FBG484 package while changing the speed grade from -1 to -2. The XC7K70T-1FBG484C offers the same nominal device and package with a commercial-temperature designation. These options are suitable for footprint-compatible transitions, but speed, temperature range, lifecycle, and timing margins must be reviewed before substitution.
Can XC7K70T-1FBG484C replace XC7K70T-1FBG484I?
The XC7K70T-1FBG484C can serve as a footprint-compatible alternative to the XC7K70T-1FBG484I when its commercial-temperature grade covers the operating environment. Both use the FBG484 package and the -1 speed grade, but the temperature designation changes from industrial to commercial. Confirm the replacement against the manufacturer ordering guide, verify available temperature margins, and account for any lifecycle or sourcing differences before production release.
Where to buy XC7K70T-1FBG484I online?
Use the Request a Quote form on this page to request XC7K70T-1FBG484I availability, lead time, and lot-level sourcing information. The form is the appropriate route for obtaining a current quotation and confirming the exact 484-pin FBG484 industrial-temperature ordering code. Engineers should include the required quantity, delivery schedule, acceptable date codes, and whether programmed or unprogrammed devices are required when submitting the request.
What is the price of XC7K70T-1FBG484I?
Current XC7K70T-1FBG484I pricing is handled through the Request a Quote form on this page because FPGA pricing depends on quantity, programmed configuration, delivery schedule, and lot availability. Submit the exact MPN and required commercial terms for a current quotation. Confirm whether the order requires factory programming, serialized identifiers, or other delivery-specific handling so the returned quotation matches the intended manufacturing plan.
What is the lead time for XC7K70T-1FBG484I?
The current XC7K70T-1FBG484I lead time should be confirmed through the Request a Quote form on this page. Lead time can change with device availability, factory scheduling, programmed-part requirements, and the requested delivery date. For production planning, provide the forecast quantity, required ship date, packaging preference, and any programming or traceability requirements. Avoid treating distributor availability as a guaranteed allocation without written confirmation.
Is XC7K70T-1FBG484I in stock?
Current XC7K70T-1FBG484I stock status should be requested through the Request a Quote form on this page. Because the Kintex-7 device may be distributed through multiple channels with different lot and programming conditions, a confirmed allocation is more useful than a general availability indicator. Include the required quantity and target date in the request, and specify whether unprogrammed devices are acceptable before placing the order.
What is the best AMD equivalent for XC7K70T-1FBG484I?
The best AMD equivalent depends on whether the replacement must preserve the -1 speed grade or only the FBG484 footprint and Kintex-7 resource configuration. XC7K70T-1FBG484C preserves the -1 grade and package but changes the temperature class, while XC7K70T-2FBG484I preserves the industrial grade and package but uses a lower speed grade. No verified cross-manufacturer drop-in equivalent was identified for this exact device.
How does the FBG484 package affect XC7K70T-1FBG484I PCB layout?
The FBG484 package requires a dense, multilayer PCB with short power connections, controlled-impedance escape routing, and careful treatment of clock and high-speed I/O nets. Because the package contains 484 contacts, signal escape usually requires via-in-pad or short microvia structures, while power delivery must use low-impedance planes or decoupling networks. Consult the AMD package files and design guidance before fixing ball assignments, layer transitions, or thermal-via placement.

엔지니어링 참조 데이터: XC7K70T-1FBG484I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC7K70T-1FBG484I when the design needs the Kintex-7 -1 speed grade, industrial-temperature operation, 65,600 logic cells, and the established FBG484 footprint. The XC7K70T-2FBG484I is the logical same-package alternative when the lower -2 speed grade still satisfies timing and the supply strategy favors that grade. Select the XC7K70T-1FBG484C when the full commercial-temperature range covers the application and preserving the -1 speed grade is important. The XC7K70T-2FBG484C is appropriate for a commercial-temperature, lower-speed design. No cross-manufacturer drop-in option was established. For every alternative, verify the device-specific speed model, industrial or commercial temperature requirement, lifecycle status, pin assignment, and timing results before releasing a PCB or production build.

대체품과의 비교

파라미터 이 제품 XC7K70T-2FBG484I XC7K70T-1FBG484C XC7K70T-2FBG484C
Brand AMD AMD AMD AMD
Package FBG484 FBG484 - same FBG484 - same FBG484 - same
Device Family Kintex-7 Kintex-7 Kintex-7 Kintex-7
Logic Cells 65,600 cells 65,600 cells 65,600 cells 65,600 cells
Configurable Logic Blocks 5,125 CLBs 5,125 CLBs 5,125 CLBs 5,125 CLBs
Speed Grade -1 -2 -1 -2
Temperature Designation Industrial Industrial Commercial Commercial
User I/O 185 I/O 185 I/O 185 I/O 185 I/O
Process Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS
Nominal Supply Voltage 1 V 1 V 1 V 1 V

주요 차별점

  • Higher selected speed grade within the same Kintex-7 FBG484 family (vs XC7K70T-2FBG484I)
  • Industrial-temperature designation for wider operating environments (vs XC7K70T-1FBG484C)
  • High logic density with extensive parallel I/O (vs XC7K70T-2FBG484C)

설계 노트

Design the FBG484 power network from the AMD/Xilinx power-supply and decoupling guidance before placing signal vias. Separate high-current and sensitive-reference connections where practical, use a low-impedance plane structure, and place the required bulk and high-frequency decoupling capacitors close to their assigned device balls. Verify voltage sequencing, startup current, and power-source impedance across temperature. Do not derive the full rail plan from the nominal 1 V figure alone.

Use the official FBG484 package files to assign every ball before routing the PCB. The 484-contact lidless FCBGA normally requires multilayer escape routing with short connections to power, ground, and high-speed interfaces. Keep clock inputs away from noisy switching nets, provide symmetric routing for differential interfaces, and use the reference pinout files to determine whether unused balls require specific treatment rather than treating them as ordinary no-connects.

Treat clocks, memory interfaces, and transceiver lanes as constrained nets. Match reference-clock routing to the applicable device guidance, control impedance through the complete stack-up, and add matching structures where the reference design requires them. Minimize stubs and unnecessary vias, and inspect the design with a signal-integrity simulator when edge rates are high. Validate sequencing across power rails because an incorrectly ordered rail can produce unintended configuration or transient current.

Do not substitute a different Kintex-7 package or speed grade solely from the family name. A device with a different package can be electrically related yet impossible to mount, while a lower speed grade can change timing closure. Before substituting XC7K70T-2FBG484I, rerun static timing with the correct device model and verify industrial-temperature requirements. Before using XC7K70T-1FBG484C, confirm that commercial-temperature operation covers the complete product environment.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The industrial-temperature designation is not an AEC-Q100 qualification. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations with AMD for the selected ordering code.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc7k70t 1fbg484i xc7k70t 1fbg484c xc7k70t 1fbg676i xc7k70t 2fbg484i xc7k70t 1fbg676c xc7k70t 2fbg676i xc7k70t fbg676 xc7k70t 2fbg676c xc7k70t datasheet XC7K70T-1FBG484I datasheet pdf XC7K70T-1FBG484I pinout XC7K70T-1FBG484I replacement XC7K70T-1FBG484I price AMD XC7K70T-1FBG484I

관련 부품 & 용어

AMD Xilinx XC7K70T-1FBG484I XC7K70T-2FBG484I XC7K70T-1FBG484C XC7K70T-2FBG484C Kintex-7 FPGA field-programmable gate array programmable logic device digital semiconductor configurable logic block CLB logic cell DSP48 slice block RAM MMCM PLL high-speed transceiver FCBGA-484 BGA package surface-mount package industrial-temperature grade 28 nm CMOS process PCB signal integrity
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기