XC7Z007S-2CLG400I - 766MHz Zynq-7000 SoC | AMD
부품 번호: XC7Z007S-2CLG400I ✓ 활성XC7Z007S-2CLG400I 개요
A Zynq-7000 SoC is an FPGA-based system-on-chip that combines a hard processor system, programmable logic, programmable I/O, and dedicated memory interfaces in one device. Its device hierarchy is Zynq-7000 SoC, FPGA and CPLD, integrated circuit, and semiconductor. This integration allows control software running on the Cortex-A9 processor to work with parallel hardware pipelines implemented in the Artix-7 fabric, avoiding the interconnect bottlenecks and board partitioning associated with separately mounted processors and FPGAs.
The principal specifications include one Cortex-A9 processor operating at 766 MHz, 23,000 Artix-7 FPGA logic cells, 100 I/O positions, and a 400-CSPBGA package at 17 mm by 17 mm. The processor provides a conventional software execution environment, while the programmable fabric supports parallel data acquisition, image processing, protocol handling, custom accelerators, and real-time control logic. CoreSight integration adds dedicated debug and trace resources for processor-based validation.
Zynq-7000 devices combine the ARM processing system with programmable logic implemented in 28 nm silicon. The architecture separates sequential software tasks from highly parallel hardware tasks without requiring data to move between separate chips. Depending on the board design, DDR memory, flash storage, clock sources, differential interfaces, and external data-conversion components connect to the SoC through dedicated or programmable I/O. Exact pin functions, voltage requirements, and timing constraints should be assigned from the AMD package data and Zynq-7000 data sheet.
Typical uses include industrial IoT gateways, machine vision, motor control, embedded vision, industrial Ethernet equipment, and compact embedded systems that benefit from concurrent Linux or real-time software processing and FPGA acceleration. In a camera-processing design, the processor can manage configuration and control flow while programmable logic performs frame capture, filtering, and pixel-level processing. In industrial control, programmable logic can implement deterministic sensor interfaces and actuator timing while the processor handles supervisory logic.
PCB design requires careful allocation of the 400-CSPBGA balls, power rails, decoupling, high-speed memory routing, and ground-return paths. Use the AMD package pinout files when assigning balls and validate the board-level escape routing against the selected device speed grade. Because the package is densely interconnected and ball-pitch constrained, manufacturing capability, solder-mask and paste design, X-ray inspection criteria, and thermal management must be addressed before high-volume production.
This product summary combines the exact device characteristics, package identity, family-level alternatives, application guidance, and design considerations engineers need when evaluating the XC7Z007S-2CLG400I for an embedded SoC FPGA platform.
드롭인 대체품: XC7Z007S-2CLG400I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z007S-2CLG400I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Logic Cells, Maximum Processor Frequency, Operating Temperature Range, Package.
XC7Z007S-1CLG400I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z007S-1CLG400C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7Z007S-1CLG400E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z007S-2CLG400C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z007S-2CLG400E
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7Z007S-2CLG400I 최대 정격 & 전기적 특성
| Device Type | Zynq-7000 all-programmable system-on-chip |
| Processor Core | Single-core Arm Cortex-A9 MPCore |
| Maximum Processor Frequency | 766 MHz |
| FPGA Family | Artix-7 |
| Logic Cells | 23,000 cells |
| I/O Count | 100 I/O |
| Debug Support | CoreSight |
| 패키지 | 400-CSPBGA (17 mm x 17 mm) |
| Process Technology | 28 nm |
| Architecture | ARM Cortex-A9 processing system with Artix-7 programmable logic |
| 동작 온도 범위 | -40°C to +100°C |
| Programming | Vivado Design Suite |
| 실장 유형 | Surface mount |
| 핀 수 | 400 balls |
XC7Z007S-2CLG400I 400-cspbga (17 mm x 17 mm) 핀 구성 가이드
XC7Z007S-2CLG400I(400-cspbga (17 mm x 17 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z007S-2CLG400I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z007S-2CLG400I 적합 용도: 6 애플리케이션s: Industrial IoT Gateway, Embedded Vision, Industrial Motor Control, Industrial Networking Equipment, Data Acquisition and Signal Processing, Secure Embedded Control.
Industrial IoT Gateway
The AMD XC7Z007S-2CLG400I fits an industrial IoT gateway that must combine network-facing software with real-time hardware I/O. Its 766 MHz Cortex-A9 processor can run protocol stacks, device management, and control software, while 23,000 Artix-7 logic cells can accelerate filtering, framing, or data aggregation. The 400-CSPBGA package supports dense integration with DDR memory, flash, and communication transceivers. A design advantage is the ability to partition time-critical tasks into programmable logic while keeping supervisory functions in software, reducing the need for a separate FPGA and processor pair. The primary implementation constraint is the density of the 400-ball land pattern and the need for controlled escape routing, multilayer construction, and thorough power and signal-integrity validation.
추천
Embedded Vision
The AMD XC7Z007S-2CLG400I is suited to embedded vision systems in which sensor data must be processed with both deterministic hardware logic and higher-level software. Programmable logic can perform pixel transport, thresholding, color processing, or trigger generation, while the 766 MHz Cortex-A9 handles configuration, object-level analysis, networking, and user-interface tasks. Integrating these functions in one 28 nm Zynq-7000 device reduces inter-chip data movement and board partitioning. With 100 I/O and a 400-CSPBGA package, the device can support camera interfaces, memory, and control signals, although high-speed routing and camera-specific interface timing must be designed against the package data and AMD data sheet ds187.
추천
Industrial Motor Control
The AMD XC7Z007S-2CLG400I can support industrial motor-control systems that require deterministic sampling alongside supervisory control. Programmable logic is suitable for encoder decoding, timing generation, PWM generation, and protection sequencing, while the 766 MHz Cortex-A9 executes control algorithms, diagnostics, communications, and safety monitoring. The Zynq-7000 architecture keeps these workloads within one package and avoids transferring time-critical signals between separate chips. The 23,000 logic cells and 100 I/O provide resources for parallel control functions, while the device's specified -40°C to +100°C range suits industrial environments. Final timing, isolation, grounding, and fault-response details should be established for the motor-drive architecture and validated with worst-case processing and I/O conditions.
추천
Industrial Networking Equipment
The AMD XC7Z007S-2CLG400I is appropriate for protocol-processing and line-card functions where a network device must handle both packet-oriented software and high-speed parallel datapaths. The Cortex-A9 can manage routing tables, management protocols, and diagnostics, while the FPGA fabric can implement framing, classification, filtering, or custom interfaces. Placing these functions in one Zynq-7000 package can lower latency and simplify synchronization compared with a discrete processor-plus-FPGA design. The 766 MHz processor rate, 23,000 logic cells, and 100 I/O provide a workable balance for compact industrial equipment. High-speed memory and transceiver channels still require careful layer planning, return-path design, and timing closure using the official AMD package and device documentation.
추천
Data Acquisition and Signal Processing
The AMD XC7Z007S-2CLG400I supports data-acquisition systems that need deterministic capture followed by flexible software analysis. Programmable logic can implement counters, trigger logic, digital filtering, and format conversion, while the Cortex-A9 performs calibration, buffering, reporting, and higher-level processing. The 100 I/O provide parallel digital channels, and the 23,000 logic cells allow multiple pipelines to operate concurrently. Its 766 MHz processor can also supervise a real-time operating system or standalone embedded application. For analog measurement systems, external converters and amplifiers remain necessary, so synchronization, voltage thresholds, and clock distribution determine achievable accuracy. Layout should separate sensitive analog regions, use suitable grounding, and provide continuous return paths beneath high-speed digital switching.
추천
Secure Embedded Control
The AMD XC7Z007S-2CLG400I can serve as the processing center in a secure embedded control system that combines operating-system software with hardware-assisted monitoring. The Cortex-A9 can execute authentication, configuration, logging, and application tasks, while programmable logic can implement alarm comparison, tamper detection, timing checks, or secure I/O gating. Co-locating these functions reduces the number of external communication paths that must be protected and enables hardware/software partitioning within one device. The device provides 23,000 logic cells and 100 I/O in a 400-CSPBGA package for integration with secure storage and external controllers. Security-critical implementations still require a defined trust boundary, safe boot process, protected configuration handling, and hardware-assisted assurance appropriate to the product's threat model.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7Z007S-2CLG400I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z007S-1CLG400I | XC7Z007S-1CLG400C | XC7Z007S-1CLG400E | XC7Z007S-2CLG400C | XC7Z007S-2CLG400E |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA (17 mm x 17 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Core | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore |
| Processor Speed | 766 MHz | 667 MHz | 667 MHz | 667 MHz | 766 MHz | 766 MHz |
| Logic Cells | 23,000 cells | 23,000 cells | 23,000 cells | 23,000 cells | 23,000 cells | 23,000 cells |
| I/O Count | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O |
| Programmable Logic Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Temperature Grade | Industrial suffix I; -40°C to +100°C | Industrial suffix I | Commercial suffix C | Extended suffix E | Commercial suffix C | Extended suffix E |
주요 차별점
- Higher processor speed within the same CLG400 footprint (vs XC7Z007S-1CLG400I)
- Integrated processor and programmable logic in one package (vs XC7Z007S-1CLG400I)
- Direct family migration across speed and temperature suffixes (vs XC7Z007S-2CLG400E)
설계 노트
Begin layout from the AMD package pinout files rather than drawing the BGA escape pattern by approximation. Fix layer count, ball assignments, and reference-plane transitions before routing the Cortex-A9 memory interfaces and FPGA high-speed I/O. Maintain continuous return paths, avoid abrupt impedance changes, and reserve matched-length structures wherever the selected interface requires them. Validate escape routing with the actual board stack-up and manufacturing rules before schematic sign-off.
Use the processor, FPGA, and I/O supply requirements in AMD data sheet ds187 to define every rail and its permitted tolerance. Place local bulk and high-frequency decoupling directly at the associated balls, with separate paths for high-current processor and programmable-logic domains where the device documentation specifies them. Check startup sequencing, rail monotonicity, and power-supply current headroom at the 766 MHz operating point rather than relying on a generic FPGA power estimate.
The 400-CSPBGA package places high-performance logic beneath the device, so thermal performance depends on the board stack-up, copper distribution, airflow, and heat-spreading structures. Model worst-case processor and FPGA activity together, then verify temperature through board-level measurements. Keep high-current switching loops compact, provide solid ground-plane continuity, and evaluate thermal vias or an external spreader when the calculated junction temperature approaches the device limit.
Do not treat the XC7Z007S-1CLG400I as an unconditional functional substitute for the -2 grade. Its 667 MHz processor rating is 99 MHz below the target's 766 MHz, and timing margins, power behavior, and qualification constraints must be rechecked. Likewise, changing the I, C, or E suffix can alter the environmental requirements even though the CLG400 land pattern remains unchanged. Update the Vivado part selection and complete timing sign-off after every suffix change.
규정 준수 정보
The device is identified as industrial-temperature grade with an operating range of -40°C to +100°C, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.