XC7Z010-2CLG400I Dual Cortex-A9 Zynq SoC | AMD
부품 번호: XC7Z010-2CLG400I ✓ 활성XC7Z010-2CLG400I 개요
A Zynq SoC is an FPGA & CPLD with an embedded ARM processing system. The programmable-logic section implements custom hardware, parallel interfaces, accelerators, or signal-processing pipelines, while the ARM Cortex-A9 subsystem executes operating-system code and controls those functions. In the broader semiconductor hierarchy, the XC7Z010 belongs to the FPGA & CPLD category and extends the functionality of a conventional FPGA through heterogeneous processing integration.
The primary advertised features include a dual ARM Cortex-A9 MPCore processor, CoreSight technology, 28K logic cells, a 766 MHz operating frequency, and a compact 400-CSPBGA package. The industrial-temperature suffix identifies this ordering option for applications requiring an extended operating-temperature grade. Its 17 x 17 mm ball-grid-array package also supports dense PCB integration while exposing the processor, programmable logic, memory interfaces, and I/O resources in one device.
Technically, the processor and FPGA fabric are functionally coupled but not automatically accelerated by hardware. A design can partition tasks between software running on the ARM subsystem and parallel logic implemented in the Artix-7 fabric, then use shared memory or high-speed interfaces for data exchange. Designers must plan clocking, memory, power, and signal-integrity constraints before implementation. The FPGA part also requires equivalent-device-aware Vivado configuration and suitable design constraints for the selected speed and temperature grade.
Typical applications include industrial controllers, programmable logic automation, embedded vision, sensor fusion, network appliances, and low-latency edge processing. For vision, the programmable fabric can accelerate deterministic image-processing stages while the processor handles control logic and external networking. For industrial equipment, hardware peripherals can be placed close to the processing engine to reduce serial-interface overhead. The same integration also supports programmable radio, test, and measurement modules when several interfaces must share a common board area.
The principal design consideration is package complexity. A 400-CSPBGA assembly requires a fine-pitch, multilayer PCB, careful escape routing, controlled-impedance interfaces, and assembly processes capable of handling the full ball array. Power and thermal design should be completed early because processor activity, FPGA utilization, DDR memory, and high-speed I/O can make board-level performance dependent on more than nominal device speed.
This page organizes the device's core electrical identity, package details, ordering alternatives, application guidance, migration considerations, and PCB implementation notes into one engineering-focused reference. It also distinguishes true package-compatible ordering alternatives from larger Zynq devices that require additional design review rather than treating them as unconditional drop-in replacements.
드롭인 대체품: XC7Z010-2CLG400I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z010-2CLG400I (동일 폼 팩터 및 풋프린트) — 차이점: Processor Core, Package, Package Dimensions, Processor Frequency, Product Type.
XC7Z010-2CLG400E
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z010-1CLG400C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7Z010-1CLG400E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z010-2CLG400C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z010-2CLG400I 최대 정격 & 전기적 특성
| Product Type | Zynq-7000 adaptive system-on-chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| FPGA Architecture | Artix-7 FPGA |
| Logic Cells | 28K |
| Listed Processor Frequency | 766 MHz |
| Debug Support | CoreSight |
| 패키지 | 400-CSPBGA (17 x 17 mm) |
| 핀 수 | 400 balls |
| 실장 유형 | Surface mount |
| Temperature Grade Suffix | I, industrial grade |
XC7Z010-2CLG400I 400-cspbga (17 x 17 mm) 핀 구성 가이드
XC7Z010-2CLG400I(400-cspbga (17 x 17 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z010-2CLG400I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z010-2CLG400I 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Machine Vision and Edge Processing, Industrial Network Gateway, Programmable Sensor Hub, Embedded Communications Equipment, Test and Measurement Module.
Industrial Automation Controller
The XC7Z010-2CLG400I fits industrial automation systems that require deterministic hardware timing alongside a capable embedded processor. Its dual ARM Cortex-A9 subsystem can run supervisory control, communications, diagnostics, and configuration software, while the 28K-cell Artix-7 fabric can implement motor-control timing, encoder interfaces, interlock logic, or custom peripheral bridges. Placing these functions in one 17 x 17 mm 400-CSPBGA device reduces the number of discrete controllers and keeps time-critical operations close to the processing engine. The industrial I grade is appropriate for extended-temperature equipment, subject to the exact operating range and qualification requirements. Implementation should use Vivado constraints matching the -2 grade and must preserve the CLG400 ball assignments during PCB layout.
Machine Vision and Edge Processing
The XC7Z010-2CLG400I is useful in machine-vision and edge-processing equipment where predictable pixel throughput matters. The 28K-cell FPGA fabric can accelerate filtering, thresholding, feature extraction, or data-format conversion with fixed latency, while the dual 766 MHz-class Cortex-A9 subsystem runs higher-level image analysis, networking, and device management. This split allows software-defined behavior to coexist with parallel hardware pipelines without moving every operation through the processor. The 400-CSPBGA package also consolidates the processor, programmable fabric, and I/O resources into a compact module. Designers should establish image-buffer interfaces, memory bandwidth, clock domains, and thermal margins early, because concurrent processor execution and high logic utilization can materially affect power delivery and board temperature.
Industrial Network Gateway
A programmable network appliance can use the XC7Z010-2CLG400I to combine protocol processing with a Linux-capable embedded control plane. The ARM subsystem can manage routing configuration, secure services, logging, and remote maintenance, while the FPGA fabric accelerates packet handling, interface conversion, buffering, or traffic classification. This heterogeneous arrangement can provide predictable data movement for protocols that would otherwise burden a general-purpose processor. The 28K logic-cell fabric gives designers room for parallel interfaces without moving the entire design into fixed-function silicon. A production design still requires careful validation of memory interfaces, Ethernet or other transceiver integration, power rails, and thermal behavior under sustained traffic. The CLG400 footprint must be treated as a complex BGA implementation rather than a conventional leaded-package layout.
Programmable Sensor Hub
The XC7Z010-2CLG400I can serve as a programmable sensor hub that gathers data from several dissimilar sensors and presents a unified stream to software. The FPGA fabric can implement parallel ADC interfaces, digital sensor ports, timestamp logic, filtering, and data packing, while the dual Cortex-A9 cores handle calibration, event processing, and communication. This arrangement is especially useful when the system benefits from hardware determinism without dedicating a separate microcontroller and FPGA. The 766 MHz listed operating frequency supports embedded control tasks, and the 28K-cell fabric allows substantial I/O consolidation. Design teams should define clock-crossing behavior, sensor-sampling tolerances, memory buffering, and fault recovery before schematic capture. Industrial I-grade ordering also supports designs intended for extended-temperature industrial environments.
Embedded Communications Equipment
XC7Z010-2CLG400I is suitable for embedded communications equipment that benefits from flexible hardware and software partitioning. The programmable fabric can implement interface adaptation, framing, CRC processing, or timing-sensitive channel logic, while the ARM subsystem handles protocol stacks, configuration, and remote management. Consolidating these functions into one Zynq device can simplify synchronization between firmware and hardware, especially when data must cross repeatedly between a hard processor and programmable logic. The 28K-cell fabric is substantial enough for moderate parallel pipelines, and the dual-core processor can support concurrent control tasks. Engineers should reserve bandwidth and address space for high-speed links, verify CDC protocols between FPGA and processor domains, and ensure power sequencing meets the requirements of attached memory and external interfaces.
Test and Measurement Module
The XC7Z010-2CLG400I can be integrated into programmable test and measurement modules that need flexible acquisition, timing, or signal-conditioning logic alongside a host processor. The Artix-7 fabric can implement counters, trigger logic, parallel data capture, and interface adapters, while the dual Cortex-A9 subsystem handles control software, calibration data, and result processing. The integrated architecture allows acquisition logic to evolve without moving every functional block into fixed hardware. Its 400-CSPBGA package also supports compact multi-channel instruments, although the fine-pitch package demands careful stack-up planning, escape routing, and assembly control. Timing-sensitive paths should use dedicated clocking and constraints, while analog or RF front ends must be designed separately from the digital SoC and referenced accurately in the complete system design.
엔지니어링 참조 데이터: XC7Z010-2CLG400I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z010-2CLG400E | XC7Z010-1CLG400I | XC7Z010-1CLG400C | XC7Z010-1CLG400E | XC7Z010-2CLG400C |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Logic Cells | 28K | 28K | 28K | 28K | 28K | 28K |
| Listed Operating Frequency | 766 MHz | 766 MHz | 766 MHz | 766 MHz | 766 MHz | 766 MHz |
| Speed-Grade Suffix | -2 | -2 | -1 | -1 | -1 | -2 |
| Temperature-Grade Suffix | I | E | I | C | E | C |
| FPGA Architecture | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA |
주요 차별점
- Combines dual-core embedded processing with programmable Artix-7 logic (vs XC7Z007S-2CLG400I)
- Maintains the full CLG400 footprint in package-compatible alternatives (vs XC7Z010-2CLG225I)
- Explicitly documented pin-compatible ordering alternative (vs XC7Z010-2CLG400E)
- Supports both processor-led and hardware-accelerated workloads (vs XC7Z010-1CLG400I)
설계 노트
Treat the 400-CSPBGA as a constrained-routing problem rather than a conventional BGA breakout. Use the AMD CLG400 package pinout and board files to establish escape geometry, ball assignments, and keepouts. Validate the selected PCB stack-up, via-in-pad strategy, solder-mask and paste design, X-ray inspection criteria, and assembly reflow profile before releasing production artwork.
Plan processor, FPGA, memory, and I/O power rails jointly. The listed 766 MHz processor grade does not describe the complete board power envelope because utilization, memory activity, I/O loading, and the selected -2 speed grade affect consumption. Use AMD power-estimation and thermal-design guidance for the final configuration, then verify the design under worst-case operating conditions.
Preserve clocking and high-speed-interface integrity from the package into the PCB. Keep clock routes short and properly referenced, apply the stack-up-derived impedance rules, control skew on synchronous interfaces, and avoid splits in reference planes. Exact I/O and clock requirements must be derived from the selected configuration and pin assignment rather than estimated from generic package rules.
Do not approve a substitution from the package suffix alone. XC7Z010-2CLG400E has an explicit compatibility statement, but temperature-grade changes still require environmental review. The -1CLG400 alternatives also change the speed designation, so regenerate timing constraints and implementation results in Vivado. Larger Zynq devices may be useful upgrades but should not be treated as drop-in replacements without a full hardware and software review.
규정 준수 정보
The exact XC7Z010-2CLG400I environmental and compliance declarations must be confirmed from the AMD product documentation or the manufacturer's current compliance declaration.