XMC4800F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
부품 번호: XMC4800F100K2048AAXQMA1 ✓ 활성XMC4800F100K2048AAXQMA1 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. In the hierarchy of electronic components, the XMC4800 is an embedded microcontroller, a system-on-chip, and a semiconductor. Its Arm Cortex-M4 architecture supports efficient control processing while the integrated Ethernet MAC adds a dedicated path for industrial Ethernet communication without requiring a separate host interface.
The primary device characteristics include a maximum core frequency of 144 MHz, 2 MB of flash memory, and 352 kB of SRAM. The device is offered in a 100-pin LQFP package and supports a 3.3 V operating supply according to distributor specifications. The exposed thermal pad improves heat transfer from the die to the PCB, which is particularly important in compact industrial controllers with sustained Ethernet and peripheral activity.
The XMC4800 architecture combines the Cortex-M4 processing core with an Ethernet MAC and a substantial collection of embedded peripherals. Its flash capacity provides room for networking stacks, control firmware, diagnostics, and application code, while 352 kB of SRAM supports packet buffers, real-time tasks, and communication workloads. This combination makes the device useful where deterministic embedded control and network connectivity must share one microcontroller platform.
Typical applications include industrial Ethernet gateways, programmable automation controllers, connected sensor systems, building automation equipment, and embedded network interfaces. The Ethernet MAC is particularly valuable for equipment that must exchange real-time process data with supervisory systems. The same platform can also support motor and motion-control designs that require deterministic timing alongside network management.
PCB implementation should prioritize a short, continuous return path beneath the exposed pad and adequate thermal-via density. Keep sensitive Ethernet traces away from high-current switching paths, use a controlled-impedance layer stack for the physical Ethernet interface, and follow the manufacturer package drawing for exposed-pad soldering and land-pattern dimensions. Confirm all peripheral assignments, clock requirements, and electrical limits against the manufacturer datasheet before release.
This product page consolidates the confirmed device identity, package, memory, processor, and Ethernet information with practical PCB and thermal guidance. It also distinguishes verified drop-in candidates from variants that lack enough evidence for replacement use, helping engineers assess fit, compatibility, and sourcing without relying on generic microcontroller family assumptions.
드롭인 대체품: XMC4800F100K2048AAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XMC4800-F100K2048-AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4800F100F2048AAXQMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4800F100K2048AAXQMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Family | XMC4000 |
| Processor Core | Arm Cortex-M4 |
| Maximum Core Frequency | 144 MHz |
| Flash Memory | 2048 kB (2M x 8) |
| SRAM | 352 kB |
| Architecture | 32-bit RISC |
| Ethernet Interface | Ethernet MAC |
| 동작 공급 전압 | 3.3 V |
| 패키지 | PG-LQFP-100, 14 x 14 mm |
| 핀 수 | 100 pins |
| Exposed Pad | Present |
| 실장 유형 | Surface mount |
| Shipping Format | Tape and reel |
| Industrial Positioning | Industrial |
XMC4800F100K2048AAXQMA1 pg-lqfp-100, 14 x 14 mm 핀 구성 가이드
XMC4800F100K2048AAXQMA1(pg-lqfp-100, 14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4800F100K2048AAXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4800F100K2048AAXQMA1 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Connected Sensor Controller, Building Automation Controller, Industrial Automation Controller, Motor and Motion Control, Network-Enabled Test Equipment.
Industrial Ethernet Gateway
The Infineon XMC4800F100K2048AAXQMA1 fits an industrial Ethernet gateway because its 144 MHz Arm Cortex-M4 core can process protocol and control tasks while the Ethernet MAC handles network connectivity. Its 2 MB flash provides room for an embedded networking stack, configuration data, diagnostics, and gateway firmware, while 352 kB of SRAM supports packet buffers and concurrent application work. A practical design places the MCU close to the Ethernet PHY, uses a controlled-impedance board stack, and separates network traces from switching and actuator circuits. The exposed pad should connect to the recommended thermal and electrical land pattern from the manufacturer package drawing.
추천
Connected Sensor Controller
The XMC4800F100K2048AAXQMA1 is useful in a connected sensor controller that combines acquisition, local filtering, diagnostics, and upstream reporting. Its 144 MHz Cortex-M4 execution supports responsive real-time processing, and the 352 kB of SRAM provides working space for sensor buffers and network state. The 2 MB flash capacity can hold firmware for scaling, compensation, calibration, and communication protocols without requiring a separate program-memory device. Designers should isolate analog sensor paths from the digital MCU and Ethernet sections, provide clean grounding near the exposed pad, and verify the selected sensor interface and analog peripherals in the manufacturer pin-multiplexing tables.
추천
Building Automation Controller
The Infineon XMC4800F100K2048AAXQMA1 suits building automation controllers that coordinate sensors, field buses, and supervisory Ethernet traffic. The Cortex-M4 core provides deterministic control capability, the Ethernet MAC supports network communication, and 2 MB of flash accommodates application logic and protocol stacks. The 352 kB of SRAM helps buffer messages and maintain real-time tasks during network activity. In a controller near motors, relays, or dimming electronics, maintain separation between the Ethernet section and noisy power stages. Use the exposed pad and package thermal design for reliable heat transfer, and confirm board-level isolation requirements for communications wiring before deployment.
추천
Industrial Automation Controller
The XMC4800F100K2048AAXQMA1 can serve as the central controller in industrial automation equipment where deterministic processing and embedded networking must coexist. Its 144 MHz Arm Cortex-M4 core handles control logic, while the Ethernet MAC supports connection to supervisory systems or plant networks. The 2 MB flash offers ample code space for motion routines, state machines, and communications, and 352 kB of SRAM supports working buffers. The 3.3 V device should be paired with appropriately regulated power rails and local decoupling. Keep high-current outputs and inductive switching paths away from sensitive timing and Ethernet lines, and use the exposed-pad land pattern to avoid a thermal bottleneck.
추천
Motor and Motion Control
The XMC4800F100K2048AAXQMA1 is appropriate for compact motion-control equipment that also requires network management or diagnostics. Its 144 MHz Cortex-M4 core supports faster control-loop execution, while 2 MB flash and 352 kB SRAM provide room for motion algorithms, parameter storage, and communication services. The Ethernet MAC can report machine status without occupying a separate network controller. Power-stage layout remains critical: keep switching nodes, motor-return currents, and protection devices away from the MCU and its exposed-pad thermal path. Verify the required timer, PWM, capture, and analog-function assignments in the manufacturer datasheet before assigning a control architecture.
추천
Network-Enabled Test Equipment
The XMC4800F100K2048AAXQMA1 can support networked test and measurement front ends that require local acquisition control and a communication path to a host or supervisory system. The 144 MHz Cortex-M4 core handles instrument sequencing and real-time processing, while 2 MB flash stores control code, calibration data, and test sequences. The Ethernet MAC supports connected operation, and 352 kB of SRAM can hold measurement buffers and protocol state. Analog and high-impedance sensor circuitry should be separated from digital switching and Ethernet return currents. Follow the exposed-pad thermal layout and verify clock, timer, serial-interface, and ADC assignments in the manufacturer documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4800F100K2048AAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4800-F100K2048-AA | XMC4800F100F2048AAXQMA1 |
|---|---|---|---|
| Package | PG-LQFP-100 (14 x 14 mm) with exposed pad | PG-LQFP-100 (14 x 14 mm) with exposed pad | PG-LQFP-100 (14 x 14 mm) with exposed pad |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Core Frequency | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 2048 kB (2M x 8) | 2048 kB | 2048 kB (2M x 8) |
| Product Family | XMC4000 | XMC4000 | XMC4000 |
주요 차별점
- Integrated industrial networking without a separate MAC controller (vs XMC4800-F100K2048-AA)
- Memory capacity for networking and control firmware (vs XMC4800F100F2048AAXQMA1)
- Single-package industrial control integration (vs XMC4800-F100K2048-AA)
설계 노트
Treat the exposed pad as both a package feature and a PCB thermal path. Follow the Infineon PG-LQFP-100-25 drawing for the land geometry, paste pattern, and allowable protrusion limits. Place multiple thermal vias beneath and around the pad where the board stack-up permits, then provide uninterrupted copper to the component. Validate the final assembly against the manufacturer reflow profile because the large exposed pad can materially change solder melting and voiding behavior.
Separate Ethernet PHY and transformer-side circuitry from switching power stages and high-current motor outputs. Route Ethernet differential pairs as a controlled-impedance pair over a continuous reference plane, minimize vias and stubs, and place the PHY close to the MCU pins that carry its digital interface. Check the manufacturer reference design for clock, decoupling, reset, and medium-interface layout rather than deriving those connections solely from the package drawing.
Do not treat the exposed pad as an automatically connected ground pin, and do not leave its thermal land pattern undefined in the PCB library. Before schematic release, compare every MCU pin and alternate function with the manufacturer pin-description table. Also verify that the chosen order code, 3.3 V supply, clock configuration, flash variant, and exposed-pad requirements match the board design. These checks prevent subtle errors caused by multiplexed pins and package-specific assumptions.
규정 준수 정보
The Infineon product page identifies the device as an industrial microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed.