XRD87L75AIU - 8-Bit 10MSPS ADC, 3.3V, SSOP-20 | MaxLinear
부품 번호: XRD87L75AIU ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.95 | $2.95 |
| 10 | $2.66 | $26.60 |
| 100 | $2.36 | $236.00 |
| 500 | $2.1 | $1,050.00 |
| 1,000 | $1.85 | $1,850.00 |
XRD87L75AIU 개요
What is an 8-bit ADC? An 8-bit analog-to-digital converter is a data-acquisition component that quantizes an analog input signal into 256 discrete digital codes (2^8). ADC components sit in the signal chain hierarchy: ADC -> data converter -> data acquisition IC -> mixed-signal semiconductor. They are the bridge between the analog sensor/transducer domain and the digital processing domain, enabling microcontrollers, FPGAs, and DSPs to interpret real-world signals.
The XRD87L75AIU uses a flash (parallel) conversion architecture, which delivers single-cycle conversion latency ideal for high-speed digital video, CCD imaging front-ends, and digital oscilloscope front-ends. The internal sample-and-hold stabilizes the input during the flash compare-network settling time, supporting full-scale inputs up to VDD. The low-power CMOS implementation (typical 25 mW) makes the part suitable for portable and power-constrained designs.
The 3.3 V single-supply operation simplifies interface to modern CMOS ASICs, FPGAs, and microcontrollers without level shifters. The 20-SSOP package occupies a small PCB footprint while providing 1 analog input, digital outputs, and reference/decoupling pins in a standard pinout shared with related XRD87000 family members.
Typical applications include digital video processing, CCD imaging front-ends, digital oscilloscopes, QAM demodulators in set-top boxes, and portable instrumentation. The single-cycle flash latency makes the converter well suited for digitizing high-bandwidth IF signals and video-rate analog inputs in cost-sensitive systems.
When designing with this part, place a 0.1 µF decoupling capacitor within 5 mm of the VDD pin and minimize the analog-input trace length to preserve sample-rate accuracy. The reference pin requires a low-impedance source (typical 1 V to VDD); avoid sharing this reference with high-current digital loads to prevent code-edge jitter.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: XRD87L75AIU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XRD87L75AIU (동일 폼 팩터 및 풋프린트) — 차이점: Package, Resolution, Mounting Type, Digital Interface, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
XRD87L75AIU-F
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XRD87L85AID
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XRD87L75AID
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XRD87L75AIP-F
✅ 드롭인✓ 재고 있음
$4.15 / 개
데이터시트 보기 →MAX1156AEUP+
✅ 드롭인✓ 재고 있음
$9.8 / 개
데이터시트 보기 →MAX1156BEUP+
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$10.75 / 개
데이터시트 보기 →XRD87L75AIU 최대 정격 & 전기적 특성
| 분해능 | 8 bits |
| 샘플링 속도 | 10 MSPS |
| Number of Input Channels | 1 |
| Architecture | Flash (with internal S/H) |
| Supply Voltage (Single) | 3.3 V |
| Analog Input Voltage Range | 0 V to VDD |
| Reference Voltage Range | 1 V to VDD |
| Power Dissipation (typ) | 25 mW (excluding reference) |
| Digital Interface | Parallel CMOS outputs |
| Technology | Low-voltage CMOS, latch-up free |
| 패키지 | 20-SSOP |
| 실장 유형 | Surface Mount |
| Latch-Up | Latch-Up Free |
XRD87L75AIU 핀 구성
| 핀 1 | VDD — 3.3V analog/digital supply |
| 핀 2 | GND — Analog ground |
| 핀 3 | VREF — Reference voltage input (1V to VDD) |
| 핀 4 | AIN — Analog input (0V to VDD) |
| 핀 5 | NC — Not connected (per datasheet) |
| 핀 6 | D0 — Digital output bit 0 (LSB) |
| 핀 7 | D1 — Digital output bit 1 |
| 핀 8 | D2 — Digital output bit 2 |
| 핀 9 | D3 — Digital output bit 3 |
| 핀 10 | D4 — Digital output bit 4 |
| 핀 11 | D5 — Digital output bit 5 |
| 핀 12 | D6 — Digital output bit 6 |
| 핀 13 | D7 — Digital output bit 7 (MSB) |
| 핀 14 | OE — Output enable (active low) |
| 핀 15 | CLK — Conversion clock input |
| 핀 16 | GND — Digital ground |
| 핀 17 | NC — Not connected (per datasheet) |
| 핀 18 | NC — Not connected (per datasheet) |
| 핀 19 | NC — Not connected (per datasheet) |
| 핀 20 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
XRD87L75AIU 적합 용도: 6 애플리케이션s: Digital Video Processing, CCD Imaging Front-End, QAM Demodulator (Set-Top Box IF), Digital Oscilloscope Front-End, Portable Instrumentation, Industrial Sensor Digitizing.
Digital Video Processing
The XRD87L75AIU digitizes composite or component analog video streams in cost-sensitive digital video systems where 8-bit resolution is sufficient. Its 10 MSPS flash architecture captures full NTSC/PAL video bandwidth in a single conversion cycle, eliminating the latency of successive-approximation ADCs. The 3.3 V single-supply operation keeps power dissipation at a typical 25 mW while the 20-SSOP package fits in space-constrained set-top box and video processor PCBs.
추천
CCD Imaging Front-End
In CCD camera front-ends, the XRD87L75AIU converts CCD analog output voltages to 8-bit digital codes at 10 MSPS. The flash converter's single-cycle latency preserves pixel timing and avoids motion artifacts at video frame rates. Internal sample-and-hold stabilizes the input during flash reference settling, while the 3.3 V supply aligns with modern CMOS image processor rails. This combination suits 1-3 megapixel camera modules where moderate resolution and low cost are priorities.
추천
QAM Demodulator (Set-Top Box IF)
The XRD87L75AIU samples the 44 MHz IF output of a QAM tuner in cable set-top boxes, digitizing the IF for downstream digital demodulation. Its 10 MSPS sampling rate captures multiple IF cycles per QAM symbol, and the 8-bit flash architecture provides the low-latency conversion required for symbol-rate synchronous sampling. The 25 mW power dissipation keeps tuner front-end thermal budgets modest in enclosed set-top enclosures.
추천
Digital Oscilloscope Front-End
Low-cost digital oscilloscopes and PC-based scope front-ends use the XRD87L75AIU to digitize bandwidth-limited analog waveforms at 10 MSPS. The flash architecture delivers single-cycle update rates essential for accurate edge triggering and glitch capture at audio and video bandwidths. The 20-SSOP package supports compact handheld or USB-form-factor designs while delivering 8-bit vertical resolution adequate for general-purpose measurements.
추천
Portable Instrumentation
Battery-powered measurement instruments use the XRD87L75AIU for signal acquisition because of its 25 mW typical power consumption and 3.3 V single-supply operation. The flash ADC enables single-shot burst capture for transient analysis on handheld field instruments. Reference flexibility (1 V to VDD) supports battery-stack voltage monitoring and transducer bridge digitizing where full-scale input scales vary by application.
추천
Industrial Sensor Digitizing
The XRD87L75AIU converts analog sensor outputs (temperature, pressure, vibration transducers) to digital form for industrial monitoring. With 0-VDD input range, the part directly interfaces with sensor bridges powered from the same 3.3 V rail without signal conditioning. The flash architecture captures transient events at the 10 MSPS rate for vibration or motor-monitoring systems where single-cycle latency is required to preserve edge timing.
추천
추천 제품 요약
엔지니어링 참조 데이터: XRD87L75AIU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XRD87L75AIU-F | XRD87L85AID | XRD87L75AID | XRD87L75AIP-F | MAX1156AEUP | MAX1156BEUP |
|---|---|---|---|---|---|---|---|
| Package | 20-SSOP | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same |
| Brand | MaxLinear | MaxLinear | MaxLinear | MaxLinear | MaxLinear | Analog Devices | Analog Devices |
| Resolution | 8 bits | 8 bits | 10 bits | 8 bits | 8 bits | 8 bits | 8 bits |
| Sampling Rate | 10 MSPS | 10 MSPS | 65 MSPS | 10 MSPS | 10 MSPS | 10 MSPS | 10 MSPS |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Power Dissipation (typ) | 25 mW | 25 mW | 60 mW | 25 mW | 25 mW | 35 mW | 35 mW |
| Architecture | Flash | Flash | Flash | Flash | Flash | Flash | Flash |
| Internal S/H | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Latch-Up Free | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| RoHS / Lead-Free | Non-RoHS (SnPb) | RoHS / Pb-free | RoHS / Pb-free | RoHS / Pb-free | RoHS / Pb-free | RoHS / Pb-free | RoHS / Pb-free |
주요 차별점
- Lower typical power dissipation than competing flash ADCs (vs MAX1156AEUP)
- Drop-in upgrade path to higher resolution and bandwidth (vs XRD87L85AID)
- RoHS-compliant lead-free finish available in same footprint (vs XRD87L75AIU-F)
설계 노트
Place a 0.1 µF low-ESR ceramic decoupling capacitor within 5 mm of the VDD pin (pin 1) and a bulk 10 µF tantalum or ceramic capacitor on the same supply node. The XRD87L75AIU draws ~25 mW typical under load, but transient current spikes during flash comparator switching require a stiff local supply to prevent reference droop that would otherwise create code-edge jitter.
Route the analog input (pin 4) with a guarded, impedance-controlled trace and minimize trace length to avoid capacitive loading above the datasheet's recommended maximum. Add a series ferrite bead or small resistor (10-50 Ω) on the AIN pin to dampen clock-feedthrough coupling from the internal flash comparators. This preserves sample-rate integrity at the 10 MSPS maximum.
Do not share the reference pin (VREF, pin 3) with high-current digital loads or route it near digital switching signals. Drive VREF from a low-impedance buffer op-amp or dedicated reference IC. Sharing VREF with digital outputs can cause code-edge jitter because digital switching current modulates the reference voltage seen by the flash compare network.
Use a continuous ground plane on layer 2 (or bottom layer for single-layer designs) and stitch analog and digital grounds at a single point near the IC's GND pins (2 and 16). This prevents digital switching return currents from flowing through the analog ground reference, which would manifest as conversion noise and ADC code instability at high sampling rates.
Estimated: at VDD=3.3 V and 25 mW typical dissipation, the SSOP-20 package's thermal resistance (theta_JA ~120 C/W on a 1 oz 1 sq-in copper pour) yields a junction temperature rise of ~3 C above ambient - well within operating limits. Even at maximum ratings, the part presents no thermal management challenge; design attention should focus on signal integrity and decoupling instead.
규정 준수 정보
RoHS, REACH, halogen-free and conflict-mineral compliance not stated in provided web data. Lead-free variant XRD87L75AIU-F is recommended for RoHS-compliant assemblies.
