Zilog

Z86C9116PSC - 16MHz ROMless 8-Bit Z8 MCU | Zilog

부품 번호: Z86C9116PSC ✓ 활성
PDIP-40, through hole Package 16 MHz Speed ROMless; external program memory required Memory
MOQ: 1 |

Z86C9116PSC 개요

The Zilog Z86C9116PSC is a ROMless 8-bit Z8 microcontroller operating at up to 16 MHz and packaged in a 40-pin PDIP through-hole package. Its key characteristics are a Z8 CPU core, 16 MHz maximum operating frequency, ROMless program-memory architecture, and CMOS implementation. The MCU is designed for embedded control systems requiring an external program-memory device and conventional through-hole PCB assembly.

An 8-bit microcontroller is a compact embedded-control processor used to read inputs, execute control logic, and drive outputs in products such as industrial controllers, instruments, appliances, and communication equipment. The Z8 family combines a processor core with on-chip peripherals and bus interfaces, while a ROMless architecture moves firmware into external memory. This creates a microcontroller, embedded processor, and programmable logic device within the wider semiconductor hierarchy.

The 16 MHz clock rate gives the Z86C9116PSC greater processing headroom than 8 MHz Z8 devices while retaining an 8-bit instruction architecture. Its ROMless configuration permits program-memory capacities and interfaces determined by the external memory device rather than a fixed internal program ROM. CMOS operation supports low-voltage digital systems, and the PDIP-40 package facilitates prototype insertion, inspection, and through-hole PCB assembly.

The part belongs to the Zilog Z86C91 family and uses the Z8 CPU core. Its 40-pin package exposes the device's address, data, control, port, reset, clock, and power connections. Because external program memory is required, the system designer must select a compatible memory device and define the electrical and address-bus connections before laying out the PCB. Operating voltage limits, memory-interface timing, I/O ratings, and detailed peripheral assignments should be confirmed against the manufacturer datasheet.

Typical applications include industrial panel controllers, instrumentation, keypad interfaces, motor and relay-control boards, data-acquisition modules, and legacy control systems. The 40-pin PDIP format is particularly useful where manual servicing, socketed assembly, or through-hole compatibility has priority over board area. It is less suitable for highly compact products where a surface-mount package would reduce board size and manufacturing complexity.

Design should reserve a stable clock source, adequate bypass capacitance, and clean power distribution around the 40-pin device. The external program-memory bus must be routed according to the device's timing and loading requirements, while unused inputs should be connected to defined logic levels. Review the pin-description table and recommended application circuit in the Zilog datasheet before finalizing the schematic and footprint.

This page combines the verified product identity, package and architecture details, price-sourcing guidance, same-family drop-in options, comparison parameters, and practical PCB guidance. It is intended to help engineers identify the correct MCU, verify compatibility, and plan an accurate Z86C9116PSC implementation.

드롭인 대체품: Z86C9116PSC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: Z86C9116PSC (동일 폼 팩터 및 풋프린트) — 차이점: Program Memory, Mounting Style, Package Type, I/O Port Count, RoHS Status.

Zilog
Program Memory: External memory; no internal ROM
Package Type: PDIP-40
RoHS Status: Not RoHS compliant
비교 대상: Z86C9116PSC →
Zilog
Program Memory: ROMless; external memory required
Mounting Style: Through-hole
Package Type: CDIP, DIP-40
비교 대상: Z86C9116PSC →
Zilog
Program Memory: 0 byte internal ROM
Mounting Style: Through-hole
Package Type: PDIP-40
비교 대상: Z86C9116PSC →

Z86C9116PEC

✅ 드롭인
Zilog
📦 PDIP-40
8-bit ROMless Microcontroller · Zilog · Z8 · 16 MHz · 8 bit · External memory; no internal ROM · CMOS · PDIP-40

가격 문의

데이터시트 보기 →

Z86C9116PSG

✅ 드롭인
Zilog
📦 PDIP-40
8-bit ROMless Z8 microcontroller · 16 MHz · 8 bit · 4.5 V to 5.5 V · 236 byte · 32 · 0 byte internal ROM · PDIP-40

가격 문의

데이터시트 보기 →

Z86C9116PEG

✅ 드롭인
Zilog
📦 PDIP-40
8-bit ROMless microcontroller · Zilog Z8 · 16 MHz · 8 bit · 4.5 V to 5.5 V · 32 ports · 40 pins · CDIP, DIP-40

가격 문의

데이터시트 보기 →

Z86C9116PSC 최대 정격 & 전기적 특성

Product Type 8-bit ROMless microcontroller
Processor Core Z8
최대 클록 주파수 16 MHz
데이터 버스 폭 8 bit
Program Memory Architecture ROMless; external program memory required
Process Technology CMOS
패키지 PDIP-40, through hole
장착 스타일 Through hole
핀 수 40 pins
RoHS 상태 Non-compliant
AEC-Q100 Qualification Not applicable

Z86C9116PSC pdip-40, through hole 핀 구성 가이드

Z86C9116PSC(pdip-40, through hole 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

Z86C9116PSC의 pdip-40, through hole 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: Z86C9116PSC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

Z86C9116PSC 적합 용도: 6 애플리케이션s: Industrial Control Panel, Instrumentation and Data Acquisition, Appliance and Equipment Controller, Keypad and Human-Interface Controller, Motor and Relay Sequencer, Communication Interface Module.

🏭

Industrial Control Panel

The Z86C9116PSC fits a legacy industrial control panel that uses a through-hole controller board and requires deterministic 8-bit logic. Its 16 MHz Z8 core can execute keypad scanning, indicator control, state-machine logic, and service-menu handling while external program memory separates firmware capacity from the MCU package. The PDIP-40 format also simplifies socketed servicing and board-level rework. Designers should confirm the permitted supply range and temperature limits, route the external address and data bus according to the manufacturer timing requirements, and provide stable clock and bypass networks. This use case favors the device when maintaining an existing DIP control architecture is more important than minimizing board area.

🔧

Instrumentation and Data Acquisition

The Z86C9116PSC is suitable for instrumentation and data-acquisition controller boards that require a stable embedded-control platform rather than a high-performance processor. Its 8-bit Z8 architecture at 16 MHz can coordinate sensor selection, front-panel commands, status reporting, and external data-transfer routines. ROMless operation allows the program-memory device to be selected according to firmware size, while the 40-pin PDIP package simplifies prototype construction and laboratory rework. Before implementation, verify signal levels, port multiplexing, timing margins, and the external-memory interface in the manufacturer datasheet. The design must also account for analog-to-digital isolation and grounding outside the MCU rather than assuming the digital controller provides those functions.

⚡

Appliance and Equipment Controller

The Z86C9116PSC can serve as the central controller in an appliance or equipment platform with motors, relays, heaters, and user inputs. Its 16 MHz processing rate supports responsive sequencing of discrete control actions, while the Z8 architecture is appropriate for established embedded-control firmware rather than graphical workloads. The external program-memory arrangement permits firmware capacity to be chosen independently of the controller, and PDIP-40 assembly remains practical for serviceable domestic equipment. Engineers should verify each port's output-driver capability, supply limits, and temperature rating before connecting loads. Use appropriate driver circuitry for relays, motors, and high-current heaters rather than driving those loads directly from MCU pins.

🖥️

Keypad and Human-Interface Controller

The Z86C9116PSC is appropriate for keypad scanning and menu-control duties because its Z8 core can service scanned inputs and implement a deterministic state machine at up to 16 MHz. Its 8-bit bus-oriented design suits legacy peripherals and external program memory, while the 40-pin through-hole package offers ample connections for port-based input and output functions. In a human-interface board, debounce timing, display-control signaling, and input voltage levels should be validated against the exact datasheet limits. Keep display and communication traces away from sensitive analog sections, and use the pin-description table when assigning multiplexing functions. The device is best suited to compact, non-graphical interfaces rather than display-intensive modern touch systems.

🤖

Motor and Relay Sequencer

The Z86C9116PSC can implement sequencing and interlocking logic for small motors, solenoids, and relay networks where an 8-bit control core is sufficient. Its 16 MHz operation supports time-based control loops, while external program memory permits a reusable firmware platform across several machine variants. The PDIP-40 package is useful in controller assemblies that are assembled through hole or designed for socketed maintenance. Pin-level verification is essential because load current, inductive voltage, and output timing must remain within device limits. Add transistor or gate-driver stages, flyback protection for inductive loads, and local bulk decoupling. A common-ground architecture and controlled power sequencing will reduce noise coupling into the MCU and its external program-memory bus.

🌐

Communication Interface Module

The Z86C9116PSC can support a legacy communication-interface module by handling low-speed serial protocols, address decoding, buffering, and supervisory logic at 16 MHz. Its ROMless architecture allows the firmware and external program memory to be organized around a product family, while the 40-pin through-hole package provides a straightforward path to existing communication boards. The design must define the electrical interface separately from the MCU, including line drivers, termination, isolation where required, and logic-level translation. Firmware should include reset handling, timeout behavior, and protocol error recovery. Confirm the relevant port multiplexing and external-memory timing in the manufacturer documentation before selecting the package for a new layout.

What is the Z86C9116PSC?
The Z86C9116PSC is an 8-bit ROMless Zilog microcontroller with a Z8 processor core and a maximum clock frequency of 16 MHz. It is supplied in a PDIP-40 through-hole package. According to the Zilog product and datasheet information, the ROMless architecture requires an external program-memory device, allowing the final firmware capacity to be established by the selected external memory.
What is the operating frequency of the Z86C9116PSC?
The Z86C9116PSC operates at up to 16 MHz. This frequency applies to its Z8 8-bit CPU core and provides substantially more execution headroom than an 8 MHz member of the same family. The manufacturer datasheet should be used to determine the permitted clock source, reset timing, and operating-voltage conditions for the specific design.
Where can I download the Z86C9116PSC datasheet PDF?
The Z86C9116PSC datasheet is available through the Zilog product references listed on this page and through the linked datasheet records. Use the manufacturer datasheet to verify the complete 40-pin assignment, electrical limits, external-memory interface, reset behavior, clock requirements, and recommended decoupling circuit before releasing a PCB layout.
Where can I find the Z86C9116PSC pinout?
The Z86C9116PSC pinout is documented in the manufacturer datasheet's pin-description section. The device uses a PDIP-40 package with standard counter-clockwise numbering, beginning at pin 1 near the package notch. Because individual pin names and alternate-function details are not reproduced in this listing, use the datasheet pin table rather than inferring connections from the 40-pin count alone.
Does the Z86C9116PSC require external program memory?
Yes, the Z86C9116PSC is a ROMless microcontroller and therefore requires external program memory. The external memory must match the controller's bus architecture, address range, timing, and supply voltage. This feature is useful when firmware size is uncertain or field updates are expected, but it adds board area, address and data routing, and an additional device-selection constraint.
What package does the Z86C9116PSC use?
The Z86C9116PSC uses a 40-pin PDIP through-hole package. Its pin count, package outline, row spacing, and hole diameter must match the standard DIP-40 footprint represented by the selected package library entry. The through-hole format is convenient for prototypes and serviceable assemblies, although it occupies more board area than a comparable surface-mount package.
Is the Z86C9116PSC suitable for industrial control systems?
The Z86C9116PSC can be suitable for legacy industrial control and instrumentation systems where an 8-bit Z8 architecture, 16 MHz operation, external program memory, and through-hole assembly are required. Before deployment, confirm the device's operating-voltage and temperature limits against the manufacturer's datasheet. The listed part is not identified as AEC-Q100 qualified for automotive use.
What can replace the Z86C9116PSC?
The closest documented replacements are the same-family Z86C9116PSC variants with a PDIP-40 package, including Z86C9116PEC, Z86C9116PSG, and Z86C9116PEG. A replacement should be selected only after checking temperature grade, external-memory timing, device identification, and every pin function. Firmware may also require modification if the alternate suffix changes electrical or qualification characteristics.
Is the Z86C9116PEC a drop-in replacement for Z86C9116PSC?
The Z86C9116PEC is a same-family PDIP-40 option and is a strong drop-in candidate because the package, 8-bit Z8 architecture, and 16 MHz operating frequency remain aligned. Confirm the complete pin assignments and operating-temperature grade in the manufacturer documentation. Also validate the external program-memory interface before treating the alternate suffix as a production replacement.
Z86C9116PSC vs Z86C9116PSG - which is better for a legacy controller?
Choose the Z86C9116PSC when its documented electrical rating and temperature grade meet the legacy controller's requirements; choose the Z86C9116PSG after confirming that its suffix-specific characteristics are preferable. Both are identified as 8-bit, 16 MHz Z86C91-family devices in PDIP-40 packages. The decisive checks are the datasheet limit tables, not the suffix alone.
When should I choose the Z86C9116PSC instead of a surface-mount MCU?
Choose the Z86C9116PSC when through-hole assembly, socket compatibility, simplified maintenance, or retention of an existing 40-pin DIP layout has priority over minimizing board area. Select a surface-mount MCU when footprint, cost, volume, and modern manufacturing requirements dominate. Both architecture choices require a fresh review of timing, power, firmware, and peripheral requirements.
Can the Z86C9116PSC replace an external-memory controller?
The Z86C9116PSC can implement a ROMless embedded-control design, but it should not be assumed to replace every controller with an external program-memory interface. Its bus timing, address capacity, I/O voltage, clocking, and peripheral set must match the original design. A true drop-in decision requires a pin-by-pin comparison and a boot-firmware compatibility review.
Where can I buy the Z86C9116PSC online?
Use the Request a Quote form on this page to request Z86C9116PSC availability, current unit pricing, minimum order quantity, and lead time for the PDIP-40 package. The form lets the purchasing request be evaluated against the exact manufacturer part number and ordering suffix, which is important for this mature ROMless microcontroller.
What is the price of the Z86C9116PSC?
Current Z86C9116PSC pricing depends on order quantity and sourcing conditions and is not fixed on this page. Submit the exact MPN, required quantity, and target date through the Request a Quote form. This approach also allows confirmation that the quoted item is the PDIP-40 Z86C9116PSC rather than a different suffix or package variant.
What is the lead time and stock status for Z86C9116PSC?
Current stock and lead time should be confirmed through the Request a Quote form on this page using the exact MPN Z86C9116PSC. Mature microcontroller availability can vary by package suffix, manufacturing lot, and order quantity, so a generic stock statement would be unreliable. The quote request should specify the required quantity and date the components are needed.

엔지니어링 참조 데이터: Z86C9116PSC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the Z86C9116PSC when maintaining a legacy 8-bit Z8 control platform, using a 40-pin through-hole footprint, and relying on external program memory is important. It is particularly suitable for serviceable industrial, appliance, instrumentation, and interface boards where DIP assembly simplifies maintenance. Consider Z86C9116PEC, Z86C9116PSG, or Z86C9116PEG when procurement needs another same-family suffix; confirm each part's temperature grade, electrical limits, and device identification against the manufacturer datasheet. Do not select an alternative solely from the 16 MHz and PDIP attributes because external-memory timing, reset behavior, or qualification can still affect compatibility. For new compact products, a surface-mount microcontroller may reduce board area, but that represents a redesign rather than a drop-in replacement and may require new firmware, pin reassignment, and PCB changes.

대체품과의 비교

파라미터 이 제품 Z86C9116PEC Z86C9116PSG Z86C9116PEG
Brand Zilog Zilog Zilog Zilog
Package PDIP-40, through hole PDIP-40, through hole PDIP-40, through hole PDIP-40, through hole
Processor Core Z8 Z8 Z8 Z8
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz
CPU Architecture 8-bit 8-bit 8-bit 8-bit
Program Memory Architecture ROMless, external program memory required ROMless ROMless ROMless
Technology CMOS CMOS CMOS CMOS
Mounting Style Through hole Through hole Through hole Through hole

주요 차별점

  • Maintains the same 16 MHz Z8 performance class (vs Z86C9116PEC)
  • Provides a same-family DIP-format sourcing path (vs Z86C9116PSG)
  • Supports controlled migration within the Z86C91 family (vs Z86C9116PEG)

설계 노트

Use the manufacturer's PDIP-40 footprint and preserve adequate spacing around the device for insertion, inspection, and rework. The external program-memory address and data signals should be routed as a defined bus group, with unused MCU inputs terminated at valid logic levels. Confirm every pin function in the datasheet because alternate-function assignments determine whether a straightforward GPIO assignment is electrically valid.

Separate the MCU supply path from switching or relay-driver supplies, and place local bypass capacitance close to the device power pins. Decoupling values and permitted ESR should follow the manufacturer recommendations rather than a generic bulk-capacitor rule. Estimate the worst-case controller dissipation from the actual supply voltage and I/O loading, then verify that the board temperature remains below the device limit at the required ambient temperature.

Do not treat every Z86C9116 suffix as electrically identical even when the core and clock rating match. Before substituting PEC, PSG, or PEG, compare the manufacturer limit tables for temperature grade, supply voltage, reset behavior, and any suffix-specific qualification. Also preserve the exact original MPN in purchasing and traceability records because package suffixes can represent meaningful ordering differences.

규정 준수 정보

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available comparison record identifies the Z86C9116PSC as non-compliant with RoHS. No additional REACH, lead-free, halogen-free, or conflict-minerals declaration was identified.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

Z86C9116PSC datasheet Z86C9116PSC pinout Z86C9116PSC datasheet pdf Z86C9116PSC equivalent Z86C9116PSC replacement Z86C9116PSC price Z86C9116PSC stock Zilog Z86C9116PSC Z86C9116PSC vs Z86C9116PSG Z86C9116 PSC PDIP-40 footprint Z86C9116PSC application circuit Z86C9116PSC ROMless microcontroller

관련 부품 & 용어

Zilog Z86C9116PSC Z86C9116PEC Z86C9116PSG Z86C9116PEG Z86C9116VEG Z86C9116AEG Z8 CPU 8-bit microcontroller ROMless microcontroller embedded microcontroller programmable logic device semiconductor 16 MHz clock CMOS PDIP-40 DIP package family through-hole assembly external program memory industrial control appliance control instrumentation human-interface control data acquisition RoHS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기