New Products · Ringkasan penyingkiran

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs

NXP introduces the FRDM-IMXRT1186 dev board with an 800 MHz Cortex-M7 and 300 MHz Cortex-M33 SoC, four Ethernet ports, and Arduino/FRDM expansion.

Diterbitkan Dikemaskini 4 min bacaan ✓ Siap AI Bagikan

TL;DR — tiga ayat

  • NXP launched the FRDM-IMXRT1186 dev board on the i.MX RT1186 crossover MCU for industrial automation, robotics, PLCs, and edge computing [S1].
  • The board pairs an 800 MHz Cortex-M7 application core with a 300 MHz Cortex-M33 control core in the MIMXRT1186CVJ8C SoC [S1].
  • Connectivity includes two Gigabit Ethernet (TSN) ports, two Fast Ethernet ports for EtherCAT or TSN, USB Type-C OTG, and a CAN transceiver [S1].

Diambil dari key_takeaways (medan sebenar, maksimum 3 entri). Fakt dan analisis dikelaskan secara terpisah.

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs". Reported key numbers: 800 MHz; 300 MHz; 64 Mbit. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFNXP FRDM-IMXRT1186 board brings i.MX RT1186crossover MCU to industrial and edge designsREPORTED KEY NUMBERS800 MHz300 MHz64 Mbit1 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Anda tiba dari jawapan AI ini adalah asal yang boleh disahkan

Ringkasan AI mungkin telah kehilangan dasar untuk klaimnya. Ramalan asal, bahagian yang terpengaruh dan setiap kutipan terdapat di halaman ini, setiap dapat ditrace ke sumbernya.

Ramalan XAIPART

Ringkasan ini membawa ramalan yang boleh dipertikaikan.

Bahagian yang terpengaruh

Tiada sebarang sepadan katalog untuk cerita ini — tiada apa yang ditunjukkan untuk menduga sepadan

Reported by CNX-Software on 2026-09-29. Summarized and analyzed by XAIPART Editorial.

What happened

NXP has launched the FRDM-IMXRT1186, a development board built around the i.MX RT1186 crossover MCU and aimed at industrial automation, robotics, PLCs, and edge computing applications.S1 According to the source, the MCU uses a heterogeneous architecture with an 800 MHz Arm Cortex-M7 core for application processing and a 300 MHz Arm Cortex-M33 core for real-time control and communications.S1

The board is said to include 64 Mbit HyperRAM, 512 Mbit HyperFlash, and 128 Mbit QSPI Flash for external memory.S1 For wired connectivity, the FRDM-IMXRT1186 carries two Gigabit Ethernet ports for TSN switching and two Fast Ethernet ports usable for EtherCAT or TSN switching, plus a USB Type-C OTG port and a CAN transceiver.S1 Debugging is handled through an on-board MCU-Link debugger and a JTAG connector.S1

The board is also reported to expose Arduino UNO R3 and FRDM headers, a FlexSPI follower header, an SRAMC header, and motor-control headers for expansion.S1 The SoC on the board is identified as the NXP MIMXRT1186CVJ8C in the i.MX RT1180 family, in an LFBGA196 package.S1

Key numbers
MetricReported valueSource
SoCNXP MIMXRT1186CVJ8C (i.MX RT1180 family, LFBGA196)[S1]
Cortex-M7 application core frequency800 MHz[S1]
Cortex-M33 control core frequency300 MHz[S1]
HyperRAM64 Mbit[S1]
HyperFlash512 Mbit[S1]
QSPI Flash128 Mbit[S1]
Gigabit Ethernet ports (TSN)2[S1]
Fast Ethernet ports (EtherCAT / TSN)2[S1]
List price / availabilityNot disclosed[S1]

Background timeline

  1. - NXP launches the FRDM-IMXRT1186 development board with the i.MX RT1186 crossover MCU, four Ethernet ports, HyperRAM/HyperFlash/QSPI storage and Arduino UNO R3 plus FRDM headers, targeting industrial automation, robotics, PLCs, and edge computing [S1].

XAIPART take

Technical impact

The dual-core split of an 800 MHz Cortex-M7 alongside a 300 MHz Cortex-M33 inside one package lets designers run an application stack and a determinist real-time loop on the same silicon, which can reduce the bill of materials when a separate MCU pair would otherwise be needed. Four Ethernet ports, including two Gigabit-capable TSN lanes and two Fast Ethernet lanes that can carry EtherCAT, allow the same board to bridge higher-level edge workloads and fieldbus-grade motion networks.XAIPART analysis

Market impact

The combination of TSN support and EtherCAT-capable Fast Ethernet ports positions the FRDM-IMXRT1186 against current industrial control dev kits, where designs often split a Linux-class processor and a dedicated real-time MCU. For sourcing teams, an FRDM board in the i.MX RT1180 family is normally a lead-time-friendly way to validate the part before committing to a custom carrier, and the MIMXRT1186CVJ8C part number should be qualified against any approved-vendor list for the eventual production MCU.XAIPART analysis

Action

Design engineers evaluating industrial PLC or motion prototypes should run a BOM trade-off study that compares the i.MX RT1186 against the existing MCU + companion-realtime-processor architecture; if feasibility checks pass, request a sample of the MIMXRT1186CVJ8C and confirm HyperFlash (512 Mbit) and HyperRAM (64 Mbit) lifecycle status with NXP. Buyers should add the FRDM-IMXRT1186 to the eval-kit shortlist and confirm distributor stock and lead time for the i.MX RT1186 before locking production schedules.XAIPART analysis

XAIPART Forecast

XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real-time core alongside a Gigabit Ethernet TSN switch; if no such competitor board ships reference designs publicly by Q4 2027, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The source did not disclose list price, distributor stocking, or production lead time for the FRDM-IMXRT1186, so any sourcing timing assumption is single-source and unconfirmed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Pilihan dan siklus hidup

Pilihan di fail — tingkat katalog, bukan peringkat pasaran
BahagianHubunganLifespanDasar
— Tiada alternatif di fail PERLU DATA — Memerlukan match_type sebelum setiap label sebelumnya mungkin muncul

“Penyelia” dan “alternatif” label hanya datang dari tipe penggabungan yang dicatat, status lifespan, atau teks sumber. Kalau tiada penggabungan yang dicatat, tiada label yang ditunjukkan. Daftar sendiri kami bukan rujukan pasar.

Apa yang harus dipantau

Ramalan yang boleh disahkan — pengesanan, tingkatan dan status semasa. Ramalan yang dituduh terus dapat dilihat.
KlaimAmbangDariStatus Biasa
XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real... no such competitor board ships reference designs publicly by Q4 2027 Q4 2027 Pending

Ramalan yang ternyata salah terus dapat dilihat dan disignaskan. Kami tidak menghapuskannya.

Bahagian yang terpengaruh

Tiada sebarang sepadan katalog. Cerita ini tidak dapat dipertukarkan dengan mana-mana bahagian yang sedang disiarkan di XAIPART. Kami tidak membuat kesimpulan, dan kami tidak menunjukkan senarai placeholder.

Tekanan kos berdasarkan dimensi

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1754, neutral. Composite index -9.7, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1754 · neutral5 dcomposite −9.7 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Bagaimana ini dihasilkan

Proses bukti — mengambil, sumber kekalahan, model dan gate
Jejak pemindaian untuk laporan ini
Source fetched CNX-Software · www.cnx-software.com · 2,098 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,695 tokens · 26.4s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.175439 · C10 rounds 0
Time contract 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Tiada baris di atas dihasilkan oleh alur bukannya ditulis dengan tangan.

Skor redaksi

Hasil pintu deterministik — PHP penuh, tanpa campur tangan model dalam keputusan
Kaedah penukaran skor 6 pemeriksaan yang berlaku, 6passed: 100 Peratus. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962. Pemeriksaan yang berlaku lulus 6 / 6 = 100% · kesimpulan: hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962 Gerbang menentukan penerbitan. Skor audit yang bebas hanya untuk peringatan.
Terdapat kesalahan? Beritahu kami apa yang salah — perbaikan diterbitkan bersama teks asal dan disiarkan. Kami tidak mengedit artikel secara diam-diam.

Komen

Jadi orang pertama untuk memberi komen.

Sumber

  1. NXP FRDM-IMXRT1186 development board features i.MX RT1186 crossover MCU, four Ethernet ports — https://www.cnx-software.com/2026/09/29/nxp-frdm-imxrt1186-development-board-features-i-mx-rt1186-crossover-mcu-four-ethernet-ports/ · rss · diakses

Fakt disignaskan S1/S2 dan dapat dijejak ke sumber yang terhubung. Pemotongan yang berlabel analisis adalah pemikiran sendiri XAIPART, dijaga berasingan dari fakta yang dilaporkan. Pautan sumber diikuti daripada nofollow — pengakuan adalah sengaja.