New Products · 採購簡報

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs

NXP introduces the FRDM-IMXRT1186 dev board with an 800 MHz Cortex-M7 and 300 MHz Cortex-M33 SoC, four Ethernet ports, and Arduino/FRDM expansion.

已發布 已更新 4 分鐘閱讀 ✓ 支援 AI 分享

TL;DR — 三句話摘要

  • NXP launched the FRDM-IMXRT1186 dev board on the i.MX RT1186 crossover MCU for industrial automation, robotics, PLCs, and edge computing [S1].
  • The board pairs an 800 MHz Cortex-M7 application core with a 300 MHz Cortex-M33 control core in the MIMXRT1186CVJ8C SoC [S1].
  • Connectivity includes two Gigabit Ethernet (TSN) ports, two Fast Ethernet ports for EtherCAT or TSN, USB Type-C OTG, and a CAN transceiver [S1].

取自 key_takeaways （實際欄位，最多 3 筆）。事實與分析分別標示。

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs". Reported key numbers: 800 MHz; 300 MHz; 64 Mbit. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFNXP FRDM-IMXRT1186 board brings i.MX RT1186crossover MCU to industrial and edge designsREPORTED KEY NUMBERS800 MHz300 MHz64 Mbit1 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

您來自 AI 回答 — 這是可驗證的原始內容

AI 摘要可能遺漏了其主張的依據。原始預測、受影響零件及每一項引用皆在本頁，且均可追溯至其來源。

XAIPART 預測

本簡報包含可證偽的預測。

跳至完整預測及其證偽規則 ›
受影響零件

此報導無目錄相符項目 — 寧可不顯示，也不推斷相符。

查看判定方式 ›
正在尋找零件？送出詢價 → RFQ

Reported by CNX-Software on 2026-09-29. Summarized and analyzed by XAIPART Editorial.

What happened

NXP has launched the FRDM-IMXRT1186, a development board built around the i.MX RT1186 crossover MCU and aimed at industrial automation, robotics, PLCs, and edge computing applications.S1 According to the source, the MCU uses a heterogeneous architecture with an 800 MHz Arm Cortex-M7 core for application processing and a 300 MHz Arm Cortex-M33 core for real-time control and communications.S1

The board is said to include 64 Mbit HyperRAM, 512 Mbit HyperFlash, and 128 Mbit QSPI Flash for external memory.S1 For wired connectivity, the FRDM-IMXRT1186 carries two Gigabit Ethernet ports for TSN switching and two Fast Ethernet ports usable for EtherCAT or TSN switching, plus a USB Type-C OTG port and a CAN transceiver.S1 Debugging is handled through an on-board MCU-Link debugger and a JTAG connector.S1

The board is also reported to expose Arduino UNO R3 and FRDM headers, a FlexSPI follower header, an SRAMC header, and motor-control headers for expansion.S1 The SoC on the board is identified as the NXP MIMXRT1186CVJ8C in the i.MX RT1180 family, in an LFBGA196 package.S1

Key numbers
MetricReported valueSource
SoCNXP MIMXRT1186CVJ8C (i.MX RT1180 family, LFBGA196)[S1]
Cortex-M7 application core frequency800 MHz[S1]
Cortex-M33 control core frequency300 MHz[S1]
HyperRAM64 Mbit[S1]
HyperFlash512 Mbit[S1]
QSPI Flash128 Mbit[S1]
Gigabit Ethernet ports (TSN)2[S1]
Fast Ethernet ports (EtherCAT / TSN)2[S1]
List price / availabilityNot disclosed[S1]

Background timeline

  1. - NXP launches the FRDM-IMXRT1186 development board with the i.MX RT1186 crossover MCU, four Ethernet ports, HyperRAM/HyperFlash/QSPI storage and Arduino UNO R3 plus FRDM headers, targeting industrial automation, robotics, PLCs, and edge computing [S1].

XAIPART take

Technical impact

The dual-core split of an 800 MHz Cortex-M7 alongside a 300 MHz Cortex-M33 inside one package lets designers run an application stack and a determinist real-time loop on the same silicon, which can reduce the bill of materials when a separate MCU pair would otherwise be needed. Four Ethernet ports, including two Gigabit-capable TSN lanes and two Fast Ethernet lanes that can carry EtherCAT, allow the same board to bridge higher-level edge workloads and fieldbus-grade motion networks.XAIPART analysis

Market impact

The combination of TSN support and EtherCAT-capable Fast Ethernet ports positions the FRDM-IMXRT1186 against current industrial control dev kits, where designs often split a Linux-class processor and a dedicated real-time MCU. For sourcing teams, an FRDM board in the i.MX RT1180 family is normally a lead-time-friendly way to validate the part before committing to a custom carrier, and the MIMXRT1186CVJ8C part number should be qualified against any approved-vendor list for the eventual production MCU.XAIPART analysis

Action

Design engineers evaluating industrial PLC or motion prototypes should run a BOM trade-off study that compares the i.MX RT1186 against the existing MCU + companion-realtime-processor architecture; if feasibility checks pass, request a sample of the MIMXRT1186CVJ8C and confirm HyperFlash (512 Mbit) and HyperRAM (64 Mbit) lifecycle status with NXP. Buyers should add the FRDM-IMXRT1186 to the eval-kit shortlist and confirm distributor stock and lead time for the i.MX RT1186 before locking production schedules.XAIPART analysis

XAIPART Forecast

XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real-time core alongside a Gigabit Ethernet TSN switch; if no such competitor board ships reference designs publicly by Q4 2027, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The source did not disclose list price, distributor stocking, or production lead time for the FRDM-IMXRT1186, so any sourcing timing assumption is single-source and unconfirmed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

替代品與生命週期

已建檔的替代品——目錄範圍，並非市場排名
零件關係生命週期依據
— 檔案中無替代品 需要資料 — 需要 match_type 在任何前代標籤出現之前

「前代」與「替代」標籤僅來自已記錄的相符類型、生命週期狀態或來源文字。未記錄相符項目時，不顯示任何標籤。我們自家的刊登內容不構成市場參考。

值得關注

可證偽預測 — 門檻、時間窗與目前狀態。已證偽的預測仍保留可見。
主張門檻作者狀態
XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real... no such competitor board ships reference designs publicly by Q4 2027 Q4 2027 Pending

事後證明錯誤的預測會保留可見並加以標記。我們不會刪除。

受影響零件

無目錄相符項目。 此消息未對應到 XAIPART 目前上架的任何零件。我們不會推測相符項目，也不會顯示佔位清單。

各維度成本壓力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1754, neutral. Composite index -9.7, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1754 · neutral5 dcomposite −9.7 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

本內容的產生方式

流程證據 — 擷取、來源合理性、模型與閘門
此簡報的稽核軌跡
Source fetched CNX-Software · www.cnx-software.com · 2,098 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,695 tokens · 26.4s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.175439 · C10 rounds 0
Time contract 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

上述每一列皆由流程產生，並非人工撰寫。

編輯評分

確定性閘門結果 — 純 PHP，判定過程無模型參與
閘門評分明細 6 項適用檢查， 6通過： 100 百分比. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962. 適用檢查已通過 6 / 6 = 100% · 判定： hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962 是否發布由審核關卡決定。獨立稽核分數僅供參考。

相關報導

發現錯誤？ 告訴我們哪裡有誤 ——更正會與原文一同發布並記錄。我們不會默默修改文章。

留言

成為第一個留言的人。

來源

  1. NXP FRDM-IMXRT1186 development board features i.MX RT1186 crossover MCU, four Ethernet ports — https://www.cnx-software.com/2026/09/29/nxp-frdm-imxrt1186-development-board-features-i-mx-rt1186-crossover-mcu-four-ethernet-ports/ · rss · 存取於

事實標記為 S1/S2，並可追溯至連結來源。標示為 分析 是 XAIPART 自身的推理，與報導事實分開保留。來源連結會被追蹤，而非 nofollow ——署名為刻意為之。