Produk (44,000+)

MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor
MB96F315

MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor

The Fujitsu Semiconductor MB96F315 is a 16-bit proprietary microcontroller in the F²MC-16FX family, operating at up to 56 MHz and integrating 160 KB of flash memory in a 48-LQFP 7 x 7 mm package. It is identified by distributor records as the MB96310 device with 160K x 8 flash organization. The MCU combines a high-performance 16-bit core, embedded flash, and embedded peripherals for compact embedded-control systems. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, timers, serial interfaces, analog or digital I/O, and support logic on one chip. The proprietary F²MC architecture provides a platform for motor control, industrial equipment, consumer appliances, and embedded automation, while the MB96F315 family targets designs requiring deterministic control and substantial on-chip flash without an external memory device. The verified distributor description specifies a maximum clock frequency of 56 MHz, 160 KB of flash memory, and a 48-LQFP package measuring 7 x 7 mm. The package combines a compact footprint with externally accessible I/O and is suitable for space-constrained boards requiring a high pin count and on-chip program storage. Exact peripheral inventory, voltage range, RAM size, timer resources, and electrical limits require confirmation in the manufacturer datasheet. The F²MC-16FX architecture is relevant to motor-control and industrial-control designs because it supports embedded control loops without requiring a separate high-performance processor. In a motor-control system, the MCU can execute control algorithms, manage input capture, operate timers, and communicate with supervisory electronics. The 56 MHz operating speed provides a defined performance class for embedded software, while 160 KB flash provides room for application code and constants. Typical implementation areas include industrial motor controllers, inverter or drive interfaces, appliance control boards, power-conversion control, and compact automation modules. Designers should verify the exact peripheral set, operating voltage, package pin assignments, and timing requirements before releasing a production design. The 48-LQFP package also requires careful thermal and PCB layout planning. For a new design, begin with the MB96F315 datasheet and confirm that the required timers, serial channels, analog functions, interrupt resources, and memory map match the application. The verified data does not include pricing, stock status, pin names, or a complete electrical characterization, so those values should be obtained from the manufacturer or an authorized distributor before procurement. This product record consolidates verified distributor specifications, family identification, package data, and sourcing links with practical design guidance. It does not invent missing electrical values and clearly identifies parameters that require datasheet confirmation.

RFC Hubungi kami
MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU
MB96F315RSBPMC-GSE2

MB96F315RSBPMC-GSE2 - 16-Bit 56MHz 160KB Flash MCU

The Infineon Technologies MB96F315RSBPMC-GSE2 is a 16-bit F²MC-16FX microcontroller operating up to 56 MHz, with 160 KB of embedded Flash memory in a 48-LQFP 7 x 7 mm package. It is based on the Fujitsu 16FX architecture and is designed for embedded control applications requiring CAN/LIN networking, timer and PWM control, and DMA-assisted data movement. The device uses 0.18 µm CMOS technology and is identified with the MB96310 series designation. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, communication peripherals, and I/O into one component. This device belongs to the 16-bit embedded MCU category rather than an 8-bit or high-end application processor category. Its RISC-like instruction pipeline and controller-oriented instruction set support efficient real-time control while handling multiple peripheral functions. Key verified features include a maximum internal clock frequency of 56 MHz, 160 KB Flash memory, a 48-LQFP package, and operation from 3.0 V to 5.5 V. The MB96F315 family provides CAN and LIN networking capability, timer/PWM resources, and DMA support. The supplied search data identifies 14 PWM channels, 3 timers, 36 I/O ports, and an operating temperature range from -40 °C to +125 °C. The F²MC-16FX core uses a 17.8 ns instruction cycle time according to the manufacturer data excerpt. Its instruction set covers bit, byte, word, and long-word data types, 23 addressing modes, and barrel-shift operations. These characteristics make it suitable for motor control, industrial interfaces, automotive networking, and other embedded systems where deterministic peripheral handling matters. Typical applications include CAN or LIN network nodes, motor and actuator controllers, timer-based control systems, DMA-assisted data acquisition, and general industrial embedded control. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system designs, subject to the complete datasheet requirements. Designers should verify the exact peripheral configuration, pin multiplexing, clock requirements, programming method, and electrical limits in the MB96310-series datasheet before layout or firmware development. The LQFP package also requires attention to thermal performance and exposed-pad or thermal-relief practices where applicable. This page consolidates verified distributor and manufacturer-search data with practical selection context, helping engineers identify whether the MB96F315RSBPMC-GSE2 fits the required 16-bit control, networking, memory, package, and supply-voltage constraints.

RFC Hubungi kami
MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon
MB9BF416NPMC-G-JNE2

MB9BF416NPMC-G-JNE2 - 144MHz Cortex-M3 MCU 512KB Flash | Infineon

The Infineon MB9BF416NPMC-G-JNE2 is an ARM Cortex-M3 32-bit microcontroller from the FM3 MB9B410R high-performance series, integrating 512 KB of flash memory and 64 KB of SRAM in a 100-pin LQFP (14x14 mm) package. It operates at a maximum clock frequency of 144 MHz, supports 3.3 V / 5 V supply, and provides a rich set of on-chip peripherals including CAN and LIN interfaces for automotive and industrial networking. What is an FM3 microcontroller? The FM3 family is Infineon's (originally Cypress's) line of 32-bit ARM Cortex-M3 microcontrollers positioned between low-end Cortex-M0/M0+ parts and high-performance Cortex-M4 devices. FM3 MCUs target cost-sensitive real-time applications with deterministic interrupt response, scalable Flash/RAM configurations, and integrated analog (ADC, DAC) and connectivity (CAN, LIN, USB, Ethernet) peripherals. The MB9BF416N sits in the MB9B410R sub-series which adds high-speed motor-control timers, complementary PWM outputs, and quadrature encoder interfaces for industrial drives. Key differentiating features include 144 MHz Cortex-M3 core, 512 KB flash, 64 KB SRAM, integrated CAN 2.0B and LIN 2.x controllers, 16-channel ADC, motor-control timer/PWM block, 100-pin LQFP with on-chip trace support, and wide 2.7 V to 5.5 V operating voltage range. The 100-pin LQFP footprint provides ample GPIO for multi-axis motor control and industrial sensor interfacing. The MB9BF416N uses the Cortex-M3 Harvard architecture with single-cycle multiply and hardware divide, enabling deterministic control-loop execution under 1 microsecond at 144 MHz. Its dual-bank flash supports in-field firmware updates via the bootloader, while the embedded CAN/LIN MACs allow protocol handling without CPU intervention. The high-resolution motor-control timer block generates complementary 3-phase PWM with programmable dead-time insertion for variable-frequency drives. Typical applications include BLDC/PMSM motor drives, industrial servo controllers, HVAC fan and pump controllers, automotive body electronics via CAN/LIN, factory automation PLCs, and home-appliance control boards. The combination of CAN/LIN and motor-control peripherals makes it particularly well-suited for mechatronic systems where networking and motion control co-exist. When designing with this device, pay attention to the external crystal selection and PLL configuration to achieve the full 144 MHz operation, and ensure proper decoupling on the analog supply pins to minimize ADC noise coupling into motor-current feedback paths. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the MB9BF416NPMC-G-JNE2 not found in the manufacturer datasheet alone.

RFC Hubungi kami
MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
MB9BF416RPMC-G-JNE2

MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon

The Infineon MB9BF416RPMC-G-JNE2 is a 32-bit ARM Cortex-M3 microcontroller in the FM3 MB9B410R family, delivering 144 MHz maximum CPU clock with 512 kByte on-chip Flash and 64 kByte SRAM. It is housed in a 120-pin LQFP (16x16 mm) package and supports a 2.7 V to 5.5 V operating voltage range, suiting both 3.3 V and 5 V system designs. According to the Cypress/Infineon datasheet (Document Number 002-05615 Rev. *D), this device also integrates CAN and LIN networking peripherals, multi-function timer/PWM blocks, and a 12-bit A/D converter. What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features. Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments. The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms. When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up. This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon
MB9EF226

MB9EF226 - 32-bit ARM Cortex-R4 MCU, 128MHz, 2MB Flash | Infineon

The Infineon MB9EF226 is a 32-bit ARM Cortex-R4 microcontroller from the Titan family, operating at up to 128 MHz with 2 MB of embedded Flash in a 176-pin LQFP package. The device integrates high-performance processing for real-time control applications, with the Cortex-R4 core delivering RISC-like instruction throughput and deterministic interrupt response. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and peripherals. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits, then to embedded processors, then to the power management hierarchy of system-on-chip devices. The MB9EF226 sits at the high-performance end of automotive-grade Cortex-R MCUs, bridging the gap between Cortex-M microcontrollers (used for general embedded control) and Cortex-A application processors (used for OS-heavy workloads). Key features include 128 MHz Cortex-R4 core with FPU support, 2 MB Flash and substantial SRAM, automotive-grade qualification under AEC-Q100, and a rich peripheral set including multiple CAN-FD interfaces, Ethernet, USB, and FlexRay. The wide operating voltage range and extended temperature capability make the device suitable for chassis and powertrain ECUs. Architecturally, the MB9EF226 uses the Titan platform with tightly coupled memory for deterministic latency. The Cortex-R4 core implements branch prediction and dual-issue capability for sustained high code density at clock speed. Hardware floating-point support accelerates sensor fusion and motor-control vector math. Typical applications include automotive body controllers, electric vehicle battery management systems (BMS), industrial motor drives, and safety-critical PLCs. The MB9EF226 is also commonly deployed in HVAC control modules where deterministic CAN-FD communication is required. When designing with this part, ensure your firmware toolchain supports Cortex-R4 (such as ARM DS-5 or IAR EWARM for Cortex-R). Decoupling capacitor placement around the 176-LQFP power pins is critical - use at least four 100 nF ceramics distributed across the package perimeter. This page consolidates distributor pricing, verified alternatives from the same Titan family, and practical PCB-layout guidance not found in the standalone manufacturer datasheet, giving engineers a faster path from selection to prototype.

RFC Hubungi kami
MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon
MB9EF226PMC-GSE2

MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon

The Infineon MB9EF226PMC-GSE2 is an ARM Cortex-R4 32-bit microcontroller from the FCR4 MB9EF226 family, operating at 128 MHz and integrating 2 MB of flash memory in a 176-pin LQFP (24x24 mm) package. According to the manufacturer datasheet, this MCU targets real-time control and chassis/safety automotive applications, with industrial-grade temperature support. The part carries an Automotive MCU designation per the Mouser catalog entry and is supplied on tape-and-reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The MB9EF226PMC-GSE2 belongs to the Cortex-R4 family, which is optimized for deterministic real-time response rather than the application-processing focus of Cortex-A cores. Within the broader taxonomy, this device sits under MCU -> microcontroller -> embedded processor -> semiconductor IC, and within Infineon's automotive-safety portfolio it occupies the chassis/safety MCU segment. Key features include a 32-bit ARM Cortex-R4 core running up to 128 MHz, 2 MB of on-chip flash, industrial temperature grade, and a 176-pin LQFP package per the Partstack LFQFP/SQUARE/GULL WING terminal form. The device supports automotive real-time control use cases such as electric power steering, brake systems, and chassis domain controllers. The automotive MCU classification indicates qualification for vehicle electrical-environment conditions. The Cortex-R4 core delivers deterministic interrupt latency and tightly coupled memory, which is essential when the application must respond to a sensor input within microseconds. Combined with 2 MB of flash, the device can host a full real-time operating system plus application code without external memory expansion. The 176-pin LQFP provides abundant GPIO and peripheral pinout for motor-control PWM, CAN-FD, and analog front-end integration. Typical applications include automotive electric power steering, electronic stability control, brake-by-wire systems, chassis domain ECUs, and industrial real-time controllers that benefit from the deterministic Cortex-R4 profile. The wide pin count supports parallel sensor interfaces and multi-axis motor control. When designing with this MCU, allocate PCB thermal copper under the LQFP thermal pad and verify that the chosen debug probe (e.g. J-Link or Infineon DAP) matches the SWD/JTAG pinout. Always check the firmware version against the latest errata document before locking the design. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet, providing engineers with a single decision-ready reference.

RFC Hubungi kami
MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas
MC-10105F1-821-FNA-M1-A

MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas

The Renesas Electronics MC-10105F1-821-FNA-M1-A is a TPS-1 family application-specific microcontroller / single-chip interface solution for PROFINET IO devices, integrating an ARM core with a dual-port Ethernet switch and supporting 100 Mbps full-duplex PROFINET communication. The device is housed in a 196-pin FPBGA package measuring 15 x 15 mm with 1.0 mm pitch, and is qualified for industrial operating conditions. A PROFINET IO device chip is an application-specific integrated circuit that bundles the industrial-Ethernet protocol stack, real-time (RT/IRT) media access, and a managed dual-port switch into a single silicon die so that field devices such as remote I/O blocks, variable-frequency drives, encoders, and identification readers can be designed without an external companion controller. Within the broader embedded-system hierarchy, this part sits at the junction of an industrial microcontroller (MCU), an Ethernet MAC/PHY block, and a deterministic-protocol accelerator, allowing OEMs to certify PROFINET conformance class C without writing low-level stack code from scratch. Key differentiating features include 196-BGA integration (no companion Ethernet controller needed), compliance with PROFINET specification V2.3 for real-time and isochronous real-time (IRT) classes, a 100 MHz ARM core, and Phoenix-Contact co-development with Renesas for guaranteed protocol interoperability. The dual-port integrated switch removes the need for an external PHY/MAC pair on simple star or line topologies common in field-cabinet wiring. Architecturally, the part pairs a 32-bit ARM Cortex-M-class CPU (100 MHz) with on-chip RAM, deterministic Ethernet media-access hardware, and a PROFINET IO device firmware load supplied by Renesas. This division of labor lets the host application processor focus on device-specific I/O while the TPS-1 handles cut-through switching, RT/IRT scheduling, and PROFINET alarm generation with deterministic cycle jitter below 1 µs per the device specification. Typical applications include PROFINET-IO remote I/O blocks, frequency-inverter / variable-frequency drive fieldbus interfaces, encoder and absolute-position sensor gateways, RFID-reader PROFINET nodes, and modular I/O stations in factory automation. The 100 Mbps full-duplex bandwidth comfortably exceeds typical PROFINET RT cycle times of 1 ms. When designing in the MC-10105F1-821-FNA-M1-A, plan for a 1.0 mm pitch BGA land pattern with controlled-impedance differential pairs for the MII/RGMII Ethernet traces and a 25 MHz reference crystal. Thermal management is straightforward at industrial ambient temperatures because the part is fabricated in a low-power CMOS process optimized for fan-less DIN-rail mounting. This page synthesizes distributor pricing, protocol-compliance scope, and application notes not consolidated on the manufacturer product page, helping industrial-automation design engineers evaluate the MC-10105F1-821-FNA-M1-A for PROFINET IO device integration as of 2026-10-09.

RFC Hubungi kami
MC10EL32DTG - 5V ECL ÷2 Divider, 8-TSSOP | onsemi
MC10EL32DTG

MC10EL32DTG - 5V ECL ÷2 Divider, 8-TSSOP | onsemi

The onsemi MC10EL32DTG is a 5V ECL (Emitter-Coupled Logic) divide-by-2 frequency divider supplied in an 8-pin TSSOP surface-mount package. The device contains one divide-by-2 element that toggles on the rising edge of the differential clock input, producing complementary ECL Q and Q-bar outputs suitable for high-speed clock tree applications. Operating from a single −4.2V to −5.7V ECL supply rail with PECL compatibility via external bias, the part delivers sub-nanosecond propagation delay characteristics typical of the 10H/100H ECL logic family. An ECL divider is a digital logic device that divides an input clock frequency by an integer factor (here, 2) using current-steering bipolar transistor stages. ECL devices occupy the top of the logic family hierarchy (faster than TTL/CMOS but higher power consumption), and the MC10EL32 specifically provides the high toggle rates required by telecommunications, instrumentation, and test equipment clock distribution where low phase noise and deterministic timing are paramount. Key features include a VBB reference voltage output that allows single-ended input operation by biasing an unused differential input as a switching reference, asynchronous reset capability for initialization, and complementary differential ECL outputs. The 8-TSSOP package provides a 0.65mm pitch and compact board footprint suitable for high-density backplane designs. Architecturally, the MC10EL32 uses differential current steering with internal emitter-follower output buffering, producing typical propagation delays under 1 ns while maintaining low output skew between Q and Q-bar. The internal VBB reference simplifies PCB design by eliminating the need for external bias networks when single-ended clocks must be AC-coupled. Typical applications include clock synthesis in SONET/SDH telecommunications equipment, frequency counter prescalers, high-speed test and measurement instrumentation, and radar/digital IF signal processing. The PECL-compatible threshold also enables use in 3.3V LVPECL systems via level shifting. When designing with this part, maintain 50-ohm impedance-controlled transmission lines on all ECL signal traces to preserve edge fidelity, and provide robust bypassing (0.1 µF and 0.01 µF capacitors) close to the VEE pin. Use the VBB pin only as a reference bias - it cannot source significant load current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that supplement the manufacturer datasheet and help engineers select, source, and implement the MC10EL32DTG in high-speed clock distribution designs.

RFC Hubungi kami
MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP
MC11E1CPBE2

MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP

The NXP Semiconductors MC11E1CPBE2 is an 8-bit ROMless HC11 microcontroller operating at up to 2 MHz, with 512 bytes of RAM, 38 I/O pins, and a 52-LQFP package measuring 10 x 10 mm. It is designed for embedded control systems requiring a compact processor, digital I/O, and automotive-oriented industrial-temperature capability. A microcontroller is a semiconductor device that integrates a CPU core, memory, input/output ports, timers, and communication interfaces on one integrated circuit. In the broader hierarchy, this MC11E1CPBE2 is an 8-bit microcontroller, part of the HC11 family, and belongs to the embedded-microcontroller and semiconductor categories. Its ROMless architecture allows the application firmware to be supplied by external memory or a programming system, supporting applications where program-memory requirements vary or field programming is required. Verified distributor data identifies the MC11E1CPBE2 as an HC11 microcontroller with a 2 MHz speed grade, ROMless configuration, 512 x 8 RAM, 38 I/O, internal oscillator, and a 52-LQFP package. The 52-terminal gull-wing package is surface-mountable and uses a 10 x 10 mm outline. Because it is ROMless, designers must verify the external memory interface and programming architecture against the original system requirements before replacing or upgrading an existing design. Typical applications include automotive electronic control units, motor and actuator controllers, sensor interfaces, industrial automation equipment, and legacy embedded systems that depend on the M68HC11 CPU architecture. The 38-I/O count provides useful connectivity for digital sensors, switches, relays, communication transceivers, and control signals. The 2 MHz CPU speed is suitable for control-loop and supervisory tasks rather than high-bandwidth signal processing or modern high-performance applications. The primary design consideration is legacy software compatibility. Firmware timing, interrupt priorities, memory-mapped peripherals, external bus behavior, and package-level routing must be preserved during any replacement. Engineers should obtain the manufacturer datasheet and verify the exact pinout, electrical limits, oscillator connections, reset requirements, and programming procedure before committing to a new PCB design. This product data summarizes verified distributor specifications, package information, sourcing references, and design considerations. It does not invent electrical limits, memory-map details, or a cross-brand substitute when the supplied web results do not establish one.

RFC Hubungi kami
MC14016BD - 4-Channel 400Ω Analog Switch | onsemi | Signal Control
MC14016BD

MC14016BD - 4-Channel 400Ω Analog Switch | onsemi | Signal Control

onsemi MC14016BD is a four-circuit CMOS analog switch and quad multiplexer with an on-state resistance of 400 Ω, 1:1 signal routing, and a 14-pin SOIC package. The device operates from 3 V to 18 V and contains four independent bilateral switches that can control either digital or analog signals. Each switch supports signal gating, multiplexing, chopping, modulation, demodulation, and CMOS logic implementations. A CMOS analog switch is a voltage-controlled semiconductor device that connects or isolates signal paths with low on-state resistance and high off-state impedance. The MC14016B family belongs to the analog switch and multiplexer hierarchy within interface ICs. Four physically independent switches permit one control signal to route each of four signal channels, while the bidirectional construction allows signal flow in either direction when the corresponding switch is enabled. The monolithic MC14016BD combines P-channel and N-channel MOS enhancement-mode devices. Its principal advantages include a 1:1 multiplexing configuration, four independent switch sections, operation across a 3 V to 18 V supply range, and a compact 14-pin SOIC package. Because the switches can handle analog as well as digital signals, the device is useful when a system must route sampled, sensed, or conditioned signals without permanently connecting every channel to the same bus. Signal integrity depends on control timing, output loading, switch charge injection, and the impedance of the connected source. The 400 Ω on resistance is appropriate for moderate-impedance switching rather than low-loss RF distribution. Control inputs should be driven only when signal levels remain within the device's valid input and output ranges, and unused control and signal pins should be connected according to the manufacturer's recommended application information. Typical uses include analog signal gating, frequency choppers, modulators and demodulators, multiplexed measurement paths, and CMOS logic interfaces. The part is especially relevant to industrial control, instrumentation, sensor multiplexing, and communication circuitry where several low-frequency or moderate-frequency signals must be selected by logic control. For PCB design, place the device close to the signals it routes and keep return paths continuous to reduce coupling between adjacent channels. Decoupling capacitors should be placed at the power pins according to the manufacturer datasheet, and control traces should be routed away from sensitive analog inputs. This page combines the manufacturer specifications with application guidance, package details, sourcing information, and drop-in replacement considerations for faster engineering review.

RFC Hubungi kami
MC14017BD - 3-18V CMOS Decade Counter | onsemi
MC14017BD

MC14017BD - 3-18V CMOS Decade Counter | onsemi

The onsemi MC14017BD is a 5-stage Johnson decade counter with a built-in code converter, a 3 V to 18 V operating supply range, and ten decoded outputs in a 16-SOIC package. It converts clock pulses into one-of-ten sequential outputs for digital sequencing, timing, and control applications. The counter also provides a carry output for extending the counting sequence beyond ten states. A decade counter, also called a divide-by-10 counter, belongs to the broader counter and divider hierarchy within CMOS logic and digital timing ICs. Unlike a binary counter, a decade counter produces ten mutually exclusive output states. The Johnson-counter architecture used in the MC14017B is designed to provide high-speed operation and spike-free decoded outputs while retaining fully static operation. Key features include a five-stage Johnson counter, an integrated decimal code converter, ten decoded outputs, positive-going-edge clock updates, and a carry output for cascaded counting. Its 3 V to 18 V supply operation supports both 5 V and 12 V logic systems. The device is offered in a 16-SOIC surface-mount package, while the MC14017BD temperature-grade designation identifies a military-oriented version of the MC14017B family. The MC14017B operates from a single positive supply referenced to ground. Its DC clock-input circuit accommodates slow clock rise times, while the decoded outputs change on the positive-going edge of the clock. A clock-inhibit input provides a second control path for pausing the count, and the asynchronous clear input resets the counter so that output Q0 becomes active for the next clock cycle. Typical applications include decade sequencing, industrial timer and counter modules, stepper-motor position sequencing, programmable logic-controller counters, relay-bank activation sequences, test-equipment timing, and digital clock or display multiplexing. The carry output can also trigger a cascaded decade stage, allowing counters larger than ten states to be constructed with additional devices. For robust implementations, treat the clock, inhibit, and asynchronous clear signals as logic inputs with defined levels during reset. Keep the clock path short to reduce susceptibility to ringing and multiple transitions near the active clock edge. Verify output timing and supply-current behavior across the full intended temperature range before releasing the design. This page combines the manufacturer’s counter architecture, package and lifecycle information with drop-in family references, parameter comparisons, application guidance, and practical design notes for engineers evaluating the MC14017BD.

RFC Hubungi kami
MC14017BF - 16 MHz Decade Counter | onsemi | Logic IC
MC14017BF

MC14017BF - 16 MHz Decade Counter | onsemi | Logic IC

The onsemi MC14017BF is a five-stage Johnson decade counter with a built-in code converter, operating from a 3 V to 18 V supply in a 16-pin SOIC package. It provides a maximum operating frequency of 16 MHz, a propagation delay of 175 ns at 15 V with a 50 pF load, and ten decoded decade outputs. The counter changes state on the positive-going clock edge and supports both rising-edge and falling-edge operation as well as programmable divide ratios and cascading. A decade counter is a sequential logic device that divides an input clock into ten decoded states. The MC14017BF family combines a five-stage Johnson counter with a decoder, producing one active output for each count from zero through nine. This structure places the MC14017BF in the logic IC hierarchy as a counter and divider within digital semiconductor and clock-control applications. Its principal characteristics include a 3 V to 18 V operating range, a 16 MHz maximum frequency, and a -55 °C to +125 °C temperature range. The Johnson-counter architecture is designed for high-speed operation and spike-free decoded outputs. The SOIC-16-208 mil package supports conventional surface-mount assembly while providing access to the clock, reset, carry, supply, ground, and decoded output functions. The MC14017BF is useful when a system needs to divide a frequency into ten discrete periods, count repetitive events, sequence multiple operations, or create programmable timing intervals. Its carry output enables frequency division beyond ten, allowing several counters to be cascaded. Falling-edge clock operation also makes it suitable for systems in which the triggering signal changes on the falling transition. Typical uses include industrial decade and event counters, clock and frequency dividers, programmable timing modules, sequencing controllers, and test equipment. In a cascaded arrangement, each additional stage extends the effective count range while preserving the decoded-decade behavior of the final stage. The broad supply range supports both low-voltage and higher-voltage industrial logic systems. When laying out the circuit, keep the clock trace short and isolate it from the ten decoded outputs to reduce clock-feedthrough and switching noise. Respect the device's absolute maximum input-voltage limits, provide a stable supply and ground reference, and account for output rise and fall times when driving capacitive loads. This page combines manufacturer specifications, drop-in family alternatives, comparison data, and practical implementation guidance for counter and divider designs.

RFC Hubungi kami
MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16
MC14018BD

MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16

The onsemi MC14018BD is a five-stage CMOS Johnson counter with asynchronous preset and reset inputs, packaged in a 16-pin SOIC. It increments synchronously on the positive-going edge of the clock, and its five counter outputs support divide-by-N operation when the appropriate feedback connection is used. The device is identified in distributor records as a counter IC with one divide-by-N element, five bits, positive-edge operation, and a 16-SOIC package. A Johnson counter is a binary counter whose outputs change in a shifted sequence rather than following conventional binary counting order. Its feedback structure can implement stable divide-by-N counters when the selected output is returned to the clock or preset logic. This makes the MC14018BD useful in frequency division, sequence generation, timing, and control systems where a configurable count ratio is required. The MC14018B family provides five asynchronously presettable and resettable counter stages. Preset is controlled through a logic-high preset-enable input, while reset provides a separate asynchronous clearing function. Synchronous counting occurs on the rising clock edge, allowing counter state to advance predictably under a defined clock source. The distinction between asynchronous control inputs and synchronous counting is important when designing reset, preset, or cascading behavior. The five counter outputs expose intermediate states of the counting sequence. These outputs can be observed directly for state indication or connected according to the desired divide ratio. Because feedback logic determines the effective modulus, correct wiring and timing must be checked against the manufacturer’s counter configuration and truth-table guidance. Typical uses include digital timing dividers, programmable sequence counters, clock-frequency division, industrial timing modules, and embedded control logic. The SOIC-16 surface-mount package supports compact PCB layouts, while the positive-edge clock architecture works naturally with rising-edge clock sources and standard CMOS control signals. When laying out the circuit, keep clock and control traces short, provide a stable supply reference, and avoid routing sensitive counter outputs directly through long traces adjacent to high-switching nodes. Decoupling should follow the manufacturer’s recommended application guidance. Because preset and reset are asynchronous, their pulse widths and settling behavior should be reviewed before using them for short control pulses. This product record combines the manufacturer function description, package and counter classification, sourcing fields, and practical implementation guidance. It also identifies compatible MC14018-family alternatives while clearly separating confirmed drop-in options from related parts that require different packages or function verification.

RFC Hubungi kami
MC14018BF - 5-Stage Presettable Counter | onsemi
MC14018BF

MC14018BF - 5-Stage Presettable Counter | onsemi

onsemi MC14018BF is a five-stage Johnson-type, presettable divide-by-N counter with asynchronous preset and reset control, packaged in a 16-pin plastic DIP. The device increments synchronously on the positive-going edge of the clock and provides five decoded decade outputs for applications requiring frequency division, sequencing, or ring-counter operation. A Johnson counter is a synchronous sequential-logic circuit whose output stages feed the next stage in a ring configuration. It belongs to the counter and divider hierarchy within CMOS logic ICs. Unlike a conventional binary ripple counter, the MC14018B implements decade-oriented counting with individually available outputs and separate asynchronous controls for preset and reset. Presetting occurs when the preset-enable input is driven to a logic 1, while the counter can be reset asynchronously through its dedicated reset input. The principal functional characteristics include five Johnson counter stages, positive-edge clock operation, asynchronous preset and reset functions, and five decoded outputs suitable for driving five sequential stages. The asynchronous control paths allow an external system to establish a known count immediately rather than waiting for a clock edge. This is useful when synchronization with another subsystem or a system initialization sequence is required. The MC14018B is implemented as a CMOS logic device, placing it within the low-dropout and low-power digital IC family associated with battery-powered and low-voltage systems. The counter maintains state across clock transitions and can divide an input clock into lower-frequency or sequential timing signals. Its decoded outputs can also act as a five-position ring sequence for sequencing multiple loads or system phases. Typical applications include programmable frequency dividers, digital timing generators, cyclic sequence counters, industrial control logic, and clock-domain distribution. It can be used where a compact five-step sequence is needed without implementing the counter from individual flip-flops. Because preset and reset are asynchronous, the device can also initialize a timing sequence after reset while the surrounding system is settling. PCB implementation requires attention to unused inputs and signal transitions. Follow the onsemi MC14018B datasheet pin-description table for every connection, keep the clock and control traces short, and place any decoupling capacitor close to the supply pins. Because transition behavior can influence adjacent CMOS nets, avoid routing high-current or high-speed signals beside the counter outputs and use a defined reset strategy during power-up. This page combines the functional description, pin and package guidance, application analysis, design notes, and sourcing information for the MC14018BF. The comparison section distinguishes the 16-pin plastic DIP MC14018BF from other MC14018B package and temperature options, helping engineers determine when a footprint or qualification change is required before substitution.

RFC Hubungi kami
MC14022BD - 4-Stage Octal Counter, 16-SOIC | onsemi
MC14022BD

MC14022BD - 4-Stage Octal Counter, 16-SOIC | onsemi

The onsemi MC14022BD is a four-stage Johnson octal counter with a built-in code converter, packaged in a 16-SOIC. It accepts a positive-going clock edge, operates from a 3 V to 18 V supply, and provides eight decoded outputs whose transitions occur on the rising clock edge. The Johnson-counter architecture is intended to produce spike-free outputs while supporting high-speed operation. MC14022BD is suited to frequency division, sequencing, timing, and digital state-generation circuits where one low-frequency clock must be translated into eight ordered output intervals. An octal counter is a sequential digital-logic component that advances through a fixed sequence of states when driven by clock transitions. The MC14022B family uses a four-stage Johnson counter followed by an integrated decoder. A Johnson counter circulates a defined pattern through four internal stages, while the decoder converts that pattern into eight mutually timed output signals. Within the broader semiconductor hierarchy, the device belongs to the counters and dividers category of CMOS logic ICs. The primary features of the MC14022BD include eight decoded outputs, positive-edge triggering, and spike-free output behavior. Its 3 V to 18 V operating range allows use in both lower-voltage 5 V systems and conventional 15 V industrial logic environments. The four-stage counter provides the basis for dividing an input frequency into eight output periods, while the built-in code converter simplifies implementation compared with a separate binary counter and decoder arrangement. Internally, the part combines four Johnson-counter stages with decoding logic. Each decoded output is normally low and becomes high only during its assigned octal time period. The outputs change on the positive-going edge of the clock pulse, making edge polarity an essential consideration when cascading multiple counters or synchronizing the circuit with other positive-edge-triggered logic. The design supports cascaded frequency division and ordered pulse generation without requiring an external binary-to-octal decoder. Typical applications include divide-by-eight clock generation, programmable timing sequences, industrial control sequencing, digital waveform generation, and phase-distribution circuits. The device can also serve as a compact state decoder when a system requires eight outputs corresponding to successive input-clock intervals. In cascaded arrangements, multiple MC14022BD devices can create longer timing sequences or additional frequency divisions while retaining a consistent positive-edge operating model. Designers should account for output rise and fall times, supply decoupling, and clock-signal integrity when operating near the upper frequency capability of the device. Place the decoupling capacitor close to the supply pins and route the clock away from output lines to avoid unintended coupling. Because the outputs change on the positive-going clock edge, downstream circuitry should use compatible triggering conventions or deliberate inversion where required. This page combines the MC14022BD device description with practical design guidance, verified source links, application-focused engineering context, and a structured comparison of compatible family members. It also organizes sourcing information, compliance fields, package details, and technical search terms to help engineers evaluate the MC14022BD for counter, divider, timing, and sequencing designs.

RFC Hubungi kami
MC14024BD - 7-Bit Binary Ripple Counter | onsemi
MC14024BD

MC14024BD - 7-Bit Binary Ripple Counter | onsemi

The onsemi MC14024BD is a 7-bit binary ripple counter IC with one counter element, negative-edge clock triggering, and a 14-pin SOIC package. It operates across a 3 V to 18 V supply range and provides buffered outputs for each of its seven counter stages. The device is designed for frequency division, event counting, timing generation, and digital state sequencing in conventional CMOS logic systems. A binary ripple counter is a sequential digital logic device that advances through 2^n states as clock pulses arrive. The MC14024BD implements seven cascaded stages, allowing a single clock input to produce division ratios from 2 through 128 when the corresponding output stages are used. Its 3 V to 18 V supply range places it between conventional 5 V logic and higher-voltage CMOS-compatible equipment. The principal features include short propagation delays, high maximum clock rates, buffered stage outputs, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. Unlike a synchronous counter, the ripple architecture changes adjacent output stages sequentially, which can create accumulated decoding delay when several outputs are decoded simultaneously. Each counter stage is buffered, allowing the outputs to drive external logic while maintaining predictable logic levels. The manufacturer describes the MC14024BD as a pin-for-pin replacement for the CD4024B. The component is also identified as Pb-free and RoHS compliant in the manufacturer datasheet. A qualified NLV-prefixed option exists for automotive and other applications requiring unique site and control changes, but the exact NLV ordering code is not identified here. Typical uses include dividing a system clock into slower timing intervals, counting recurring events, sequencing digital operations, generating programmable delays, and maintaining a modulo count in industrial control, instrumentation, and embedded peripheral logic. The counter can also operate as a one-shot or binary state register when its clock and reset inputs are driven according to the application requirements. Designers should account for ripple propagation delay when decoding multiple outputs, allow sufficient clock rise and fall times for reliable CMOS operation, and use hysteresis benefits when the clock source is noisy. Decoupling capacitors should be placed close to the supply pins, while unused inputs must be held at a defined logic level. This page also organizes the available sourcing, comparison, and engineering guidance around the exact MC14024BD ordering code. For a new design, the MC14024BD is most appropriate when a 14-pin SOIC footprint, seven binary count stages, and a 3 V to 18 V operating range are required. Because it is a ripple counter, a synchronous counter may be preferable when simultaneous output transitions must remain tightly aligned. For legacy repairs, confirm the exact pinout and electrical limits in the manufacturer datasheet before substituting an equivalent device onto an existing board.

RFC Hubungi kami
MC14024BF - 7-Bit CMOS Ripple Counter IC | onsemi
MC14024BF

MC14024BF - 7-Bit CMOS Ripple Counter IC | onsemi

The onsemi MC14024BF is a 7-bit, asynchronous binary ripple counter IC with a supply voltage range of 3 V to 18 V, operating temperature range of -55°C to 125°C, and a 14-terminal PDSO14 package. It provides seven buffered counter outputs, negative-edge clock triggering, upward counting, and standard CMOS integration. A binary ripple counter is a logic IC that advances through a sequence of binary values when an external clock edge is applied. The MC14024BF belongs to the CMOS counter and divider category within the broader hierarchy of digital logic, logic ICs, and integrated circuits. Its seven stages can be used independently as modulo counters, frequency division stages, state-counting elements, or a complete seven-bit counter when the output stages are chained internally. The key operating features include seven counter stages, buffered outputs, negative-edge triggering, asynchronous counting, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. These characteristics make the device useful when a design requires a simple counter without a dedicated microprocessor or programmable logic. The 3 V to 18 V supply range permits operation across common low-voltage and conventional CMOS supply systems. The ripple architecture advances one stage per clock event, with propagation delay accumulating through the cascaded stages. Each output is buffered, allowing individual stage outputs to be observed or used in external logic. Because the maximum operating frequency and timing limits depend on operating voltage and temperature, the onsemi MC14024B datasheet should be consulted for the applicable values before relying on the counter at a system clock edge that approaches the device limit. Typical applications include digital event counting, pulse accumulation, seven-segment sequencing control, industrial timing, frequency division, laboratory instrumentation, and embedded control logic. The MC14024BF can count external events when the input signal remains within the electrical limits of its clock input. Its buffered outputs are particularly useful when one or more counter states must drive gates, indicators, or control signals independently. For reliable implementation, connect the reset to a defined inactive state, maintain clean clock edges, and observe the supply-voltage and temperature limits of 3 V to 18 V and -55°C to 125°C. Because ripple-counter outputs can change successively after a clock edge, downstream circuitry should not treat the seven outputs as a simultaneous encoded bus unless the timing requirements are specifically analyzed. This page combines the onsemi counter architecture with application guidance, verified parameter availability, comparison fields, and practical implementation notes. It helps engineers distinguish the MC14024BF from other counter functions and identify what must be checked in the manufacturer datasheet before releasing a PCB or production design.

RFC Hubungi kami
MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi
MC14029BD

MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi

The onsemi MC14029BD is a 4-bit binary/decade up/down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a single monolithic structure. The device supports binary counting and BCD operation, with four complementary outputs, an asynchronous parallel load function, and separate count-up and count-down clock inputs. It is packaged in a 16-pin SOIC for surface-mount assembly. A binary counter is a sequential digital circuit that stores or tracks a number of clock events and advances or reverses its state through a defined sequence of binary states. The MC14029B extends this category with selectable binary or decimal counting, making it a logic IC within the broader counter, divider, and clock-and-timing hierarchy. Its decade mode supports values from 0 through 9 before rollover, while binary mode supports a 4-bit count from 0 through 15. The counter consists of type-D flip-flop stages with gating that provides toggle capability. Separate count-up and count-down inputs allow the counting direction to be selected, and asynchronous load inputs provide a parallel mechanism for initializing the output state. The complementary outputs support both active-high and active-low counting signals, making the device suitable for modular counters, programmable timing systems, sequence generators, and industrial control logic. The MC14029B family is identified as a CMOS counter constructed from P-channel and N-channel enhancement-mode devices. CMOS construction is significant in digital systems because it supports low static power dissipation relative to the switching activity, while complementary logic can provide rail-to-rail output levels and noise margin benefits. The operating voltage, clock frequency, output current, and environmental limits should be taken from the manufacturer datasheet when designing a new circuit. Typical uses include bidirectional event counting, frequency division, decade sequencing, pulse-train generation, and embedded control logic. The binary/BCD selection allows the same physical counter to support both hexadecimal-style state progression and decimal displays or decade-based timing systems. In cascaded designs, multiple MC14029BD devices can form larger counters when the application requires more than four count bits. For PCB implementation, place the device close to the signals it drives and route clock, reset, load, and carry inputs away from sensitive analog or high-speed clock networks. The asynchronous load and reset controls should be checked against the system timing budget because their assertion can change the counter outputs independently of the counting clock. Decoupling requirements, maximum transition rates, and input logic levels must follow the manufacturer datasheet. This page combines the family-level device description, package information, a source-linked pricing record, compatible same-family references, and practical implementation guidance. It is intended to help engineers identify the correct counter function, verify the 16-pin surface-mount footprint, and plan logic-level, timing, and layout decisions before releasing a PCB.

RFC Hubungi kami
MC14029BF - 4-Bit Binary/Decade Up-Down Counter | onsemi
MC14029BF

MC14029BF - 4-Bit Binary/Decade Up-Down Counter | onsemi

The onsemi MC14029BF is a 4-bit binary/decade up-down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a 16-pin SOIC package. It supports positive-edge-triggered counting, operates in binary or BCD mode, and provides separate carry and borrow outputs for multi-digit arithmetic and digital sequencing. The MC14029BF is the F-package ordering code associated with the MC14029B counter family and is identified by onsemi as the MC14029B Binary/Decade Up/Down Counter. A binary/decade up-down counter is a synchronous logic circuit that increments or decrements a four-bit numerical state when clocked. Binary mode represents values from 0 through 15, while decade mode supports decimal counting from 0 through 9. In the broader electronics hierarchy, the MC14029BF is a counter IC, which belongs to the logic IC and digital semiconductor categories. Its architecture combines D-type flip-flop stages with gating that permits counting in either direction, making it useful for modular arithmetic, stepper-motor position tracking, frequency division, and programmable event sequencing. The principal feature of the MC14029BF is its bidirectional counting capability. A separate up/down control determines the counting direction, while the clock input advances the selected state on the active edge. The four parallel outputs Q0 through Q3 expose the current count for direct observation, decoding, display, or control. A cascade input allows multiple counters to form larger counting systems, and the carry and borrow outputs identify overflow or underflow conditions. A parallel load input supports initialization to a predefined count, while master reset provides a common clearing mechanism. Because the device is implemented in complementary MOS technology, it combines low-power operation with the voltage-level behavior expected from the MC14029B logic family. The counter can be used either as a binary counter or as a decade counter, allowing the same physical circuit to serve digital clocks, industrial sequence counters, and modular arithmetic functions. Because a cascade connection introduces propagation delay between stages, designers should account for settling time when interpreting overflow signals or when several stages must transition coherently. Typical uses include digital frequency dividers, programmable event counters, bidirectional position indicators, decade timing chains, and four-bit arithmetic sequences. In a cascaded display or timing system, one MC14029BF can count units while additional devices count tens and higher groups. The carry output can advance the next stage during an up-count, while the borrow output can decrement it during a down-count. A parallel-load path can also initialize the counter to a nonzero value, which is useful in presettable timers and sequence generators. PCB implementation should preserve the pin assignments of the 16-pin SOIC footprint and route clock and control signals away from sensitive analog or high-speed nets. The clock input is especially important in a counter because excessive clock-edge noise can cause false increments or decrements. Keep traces short, provide a low-impedance ground reference, and avoid placing slow control inputs immediately beside the clock net when the layout permits. Follow the manufacturer’s application information for recommended decoupling and unused-input treatment. This product page combines the manufacturer’s function description with package, pinout, sourcing, and engineering guidance. It also distinguishes the MC14029BF from related ordering codes while emphasizing that final replacement decisions require checking the complete truth table, timing limits, voltage limits, and operating-temperature requirements for the specific design.

RFC Hubungi kami
MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi
MC14040BD

MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi

The onsemi MC14040BD is a 12-stage ripple-carry binary counter operating from 3 V to 18 V in a 16-pin SOIC package. The device advances its count on the negative-going edge of the clock and provides twelve binary outputs for frequency division, event counting, timing, and sequential control. Its monolithic construction uses MOS P-channel and N-channel enhancement-mode devices, while an input wave-shaping circuit supports reliable clock handling. A binary counter is a sequential digital-logic component that stores an integer count and advances that count when triggered. The MC14040B belongs to the counter and divider hierarchy within logic ICs. Its twelve stages divide the input clock by powers of two, allowing Q0 through Q11 to represent successive binary bits of the accumulated count. This structure supports both binary counting and programmable frequency division when selected outputs are used as the feedback clock. The principal features include a 12-bit count capacity, negative-edge clock operation, 3 V to 18 V operating voltage, and 16-pin SOIC construction. The ripple-carry architecture provides multiple count taps without requiring a microprocessor or programmable logic device. Because the outputs are ordinary CMOS logic levels, the counter can be combined with gates, flip-flops, display drivers, and timing circuits in industrial control, instrumentation, and embedded systems. Operationally, the device accepts a clock transition at the CLK input and transfers state through twelve internal stages. A master reset input initializes the count, while the twelve Q outputs expose the binary count bits. The manufacturer identifies time-delay circuits, counter controls, and frequency division among the intended applications. Designers should account for propagation delay through the ripple chain when cascaded counters must present a coherent multi-bit count to downstream logic. The MC14040BD is suitable for industrial control and automation, frequency-divider modules, programmable timing references, digital time-delay circuits, event counters, and low-cost embedded sequencing systems. It is especially useful when a controller needs a repeatable binary count derived from an external clock without allocating a microcontroller input or software counter. For reliable implementation, route the clock and reset traces away from the Q outputs, keep the supply return path short, and place the normal bypass capacitor close to the supply pins. Confirm that the clock amplitude and transition times meet the operating requirements for the selected supply voltage, and account for counter propagation delay when multiple output bits are sampled simultaneously. This page combines the manufacturer device characteristics with package-level implementation guidance, comparison parameters, and application-oriented design notes. Those engineering details help engineers evaluate the MC14040BD for a new counter design before completing the PCB schematic, timing analysis, and qualification plan.

RFC Hubungi kami
MC14046BF - 1.9MHz Phase-Locked Loop IC | onsemi
MC14046BF

MC14046BF - 1.9MHz Phase-Locked Loop IC | onsemi

The onsemi MC14046BF is a CMOS phase-locked-loop IC with a maximum operating frequency of 1.9 MHz, supplied in a 16-pin SOIC package measuring 5.30 mm wide. The device combines two phase comparators, a voltage-controlled oscillator, a source follower, and a zener diode. Its phase-locked-loop architecture synchronizes an output signal with a reference input, making it suitable for frequency synthesis, frequency multiplication, frequency division, modulation, tone generation, and other clock-and-timing systems. A phase-locked loop is a feedback-control circuit that compares two signals and adjusts a controllable oscillator until the phase or frequency relationship reaches the required condition. The MC14046BF belongs to the PLL family within clock-generation and timing ICs. Its internal phase comparators detect differences between input signals, while the voltage-controlled oscillator varies its output frequency according to a control voltage. The source follower provides an interface to the timing network, and the zener diode supports stable operation in the intended CMOS supply range. The main feature of the MC14046BF is its 1.9 MHz maximum operating frequency. This makes the IC appropriate for signal-generation and synchronization tasks that do not require the multi-gigahertz rates of a modern fractional-N synthesizer. Its 16-pin SOIC package supports conventional surface-mount PCB assembly while exposing the comparator, VCO, source-follower, and zener functions needed for external timing components. The broad integration reduces the number of separate blocks required in a basic PLL implementation. In operation, the phase comparators evaluate the relationship between the input and feedback signals. Their control output is applied to the voltage-controlled oscillator through an external timing network, causing the oscillator to change frequency until the loop reaches its locked condition. The source-follower output can be used to develop a compatible feedback or timing signal. External resistors and capacitors determine loop dynamics, operating range, filtering, and startup behavior, so component selection and layout remain important parts of the design. Typical applications include FM and AM demodulation, tone decoding, frequency multiplication, frequency division, clock recovery, synchronized signal generation, and low-to-medium-frequency synthesis. The 1.9 MHz operating limit makes the MC14046BF especially relevant to communications, instrumentation, industrial control, audio-frequency systems, and embedded timing circuits where a flexible analog PLL is more suitable than a fixed-frequency clock oscillator. The primary design consideration is the external analog network around the PLL. Capacitor values, resistor tolerances, comparator polarity, VCO control-voltage limits, and loop filtering directly affect lock range and stability. Keep the timing and feedback paths compact, use a low-noise supply, and verify both acquisition and steady-state phase error across the required temperature range. This page combines the verified 1.9 MHz frequency and 16-SOIC package information with practical implementation guidance, selection criteria, pinout-status clarification, and same-package replacement analysis. These engineering notes help distinguish a usable direct replacement from a merely similar PLL before committing to a PCB redesign.

RFC Hubungi kami
MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi
MC14051BD

MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi

onsemi MC14051BD is a digitally controlled analog multiplexer and demultiplexer implementing an SP8T solid-state switch for routing analog signals. The device is specified for a 3 V to 18 V supply range, operates as a single 8:1 analog switch, and uses a 16-pin SOIC package. The D suffix identifies the lead-free SOIC ordering variant associated with the onsemi MC14051B family. An analog multiplexer is a semiconductor switch that connects one of several signal terminals to a common terminal according to digital address and enable inputs. The MC14051B family provides low ON impedance and very low OFF leakage, making it suitable for signal-routing applications in analog, industrial, communications, and embedded systems. Its control logic allows the selected analog channel to be changed without changing the source or destination circuitry. The MC14051BD uses three digital select inputs to address one of eight common analog channels, while an enable input provides active control of the switch. The select inputs determine which channel is connected to the common terminal, and the enable input provides a controlled way to disconnect or isolate the selected path. This arrangement supports signal selection, test-point routing, sensor multiplexing, and general-purpose analog switching. The MC14051B family is designed for positive supply operation from 3 V to 18 V. Its low ON impedance and very low OFF leakage help preserve signal integrity when switching between sources. Because the switch characteristics depend on supply voltage and signal amplitude, the application should be checked against the manufacturer datasheet for the complete electrical limits, temperature ranges, and dynamic behavior. Typical uses include data-acquisition systems, analog measurement interfaces, communications equipment, instrumentation, and embedded control systems. The 16-SOIC package supports conventional surface-mount PCB assembly while providing separate common, input, select, enable, supply, and no-connect terminals. The device is appropriate when a design requires eight analog channels to be routed through one common path. Designers should keep analog routing traces short, provide a stable supply reference, and account for injection charge and switching transients when the selected signal changes rapidly. The manufacturer datasheet is the authoritative reference for pin assignments, maximum ratings, recommended operating conditions, and application details.

RFC Hubungi kami
MC14051BF 8:1 Analog Multiplexer, 280 Ohm, 16-Pin SOIC | onsemi
MC14051BF

MC14051BF 8:1 Analog Multiplexer, 280 Ohm, 16-Pin SOIC | onsemi

onsemi MC14051BF is an 8:1 analog multiplexer and demultiplexer implemented as a digitally controlled analog switch. The device supports signal routing over a 3 V to 18 V supply range, features approximately 280 ohm ON resistance, and is packaged in a 16-pin SO EIAJ package. It is designed for selecting one of eight analog or digital signal paths through three binary control inputs, making it suitable for instrumentation, data acquisition, communication equipment, and control systems. An analog multiplexer is an interface IC that routes multiple signal sources to a common output or distributes one signal among multiple destinations. The MC14051B family uses CMOS-style bilateral switches, allowing analog signals to be handled across the operating supply range. In multiplex mode, three select inputs determine which of the eight channels connects to the common terminal. In demultiplex mode, the common terminal drives the selected channel, depending on the external circuit configuration and signal direction. The MC14051BF provides low ON impedance and very low OFF leakage current. The manufacturer describes the MC14051B, MC14052B, and MC14053B as digitally controlled analog switches, with the MC14051B implementing an SP8T solid-state switch. The low switching resistance is useful when connecting higher-impedance sensors, measurement inputs, or low-frequency control signals to a shared analog-to-digital converter or instrumentation amplifier. Because the common and channel terminals are bilateral switch paths, the device can be used for signal multiplexing, signal distribution, and circuit isolation. The three select inputs are decoded internally to select one of eight channels. Designers should ensure that select transitions do not create unacceptable transients when the connected signals can change rapidly, and they should account for off-channel leakage and parasitic capacitance when precision measurements are required. The MC14051BF is identified by onsemi with an operating temperature range of -55 °C to +125 °C in distributor listings and a 16-pin SO EIAJ package. The device is commonly used with 3 V, 5 V, 12 V, and 18 V supply systems. Its broad supply range and CMOS control interface make it suitable for industrial instrumentation, test and measurement, communication interfaces, audio routing, and embedded control systems. For PCB implementation, place the device close to the multiplexed signal source and the receiving circuit to minimize trace capacitance and analog crosstalk. Keep the common and channel routing reasonably short, provide a stable supply connection, and observe the manufacturer’s input voltage limits. The select logic should be driven by compatible CMOS logic and changed only after considering the signal states present on the connected channels. This page summarizes the manufacturer’s device description, distributor specifications, package information, application considerations, and verified replacement references for MC14051BF evaluation.

RFC Hubungi kami
MC14052BF - Dual 4:1 CMOS Multiplexer | onsemi
MC14052BF

MC14052BF - Dual 4:1 CMOS Multiplexer | onsemi

The onsemi MC14052BF is a dual 4:1 differential CMOS analog multiplexer with an on-resistance of 280 ohm, packaged in a 16-pin SO EIAJ surface-mount package. It combines two independently controlled 4:1 selectors in one IC, allowing eight analog inputs to be routed to two outputs while conserving board space. The device is suitable for instrumentation, signal routing, data acquisition, and test systems that require bipolar-compatible analog switching. An analog multiplexer is an interface IC that connects one of several input channels to a shared output path using digital address and control signals. The MC14052BF belongs to the broader multiplexer and analog-switch hierarchy, where its 4:1 configuration provides more input selection than a single-pole switch. Because one package contains two circuits, it can perform complementary selection, differential measurement, or redundant routing without requiring two separate switch ICs. The MC14052BF provides two switch circuits, eight analog input terminals, two analog outputs, four address inputs, and inhibit and enable controls in a 16-pin package. Its 280-ohm on-resistance makes it suitable for circuits in which moderate insertion resistance is acceptable. The manufacturer also identifies the MC14052BF as a pin-for-pin replacement for CD4051, CD4052, and CD4053 families, although their internal channel counts and pin functions must be checked before using that statement as a design rule. The architecture is based on complementary CMOS transmission gates, allowing analog signals to be connected or isolated under digital control. Address inputs select the active input path, while the inhibit and enable inputs provide gating for system-level control. The manufacturer datasheet also identifies low-noise operation of 12 nV per square-root hertz at frequencies of 1.0 kHz and above, making the device relevant to low-level analog measurement paths. Typical uses include multimeter and oscilloscope input switching, automated test equipment, sensor signal selection, communication-channel routing, and data-acquisition systems. Two internal selectors are especially useful when a system must compare two instruments, route complementary signals, or maintain control paths around a measurement chain. These applications benefit from centralized channel selection while requiring careful attention to address timing, enable logic, and off-channel behavior. Design with the MC14052BF by treating its control inputs as digital signals referenced to the same supply used by the analog path. Keep sensitive analog routing away from high-current switching nodes and provide a stable ground reference. Check signal amplitudes against the switch's operating limits, observe the required logic states for address, inhibit, and enable pins, and verify the package dimensions before footprint assembly. This product page consolidates the device's multiplexer configuration, package information, sourcing information, drop-in candidates, and practical engineering guidance. It also distinguishes documented pin-for-pin relationships from design decisions that still require verification of voltage ratings, logic levels, channel assignments, and application-specific performance.

RFC Hubungi kami