MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16
MPN: MC14018BD ✓ AktifMC14018BD Ringkasan
A Johnson counter is a binary counter whose outputs change in a shifted sequence rather than following conventional binary counting order. Its feedback structure can implement stable divide-by-N counters when the selected output is returned to the clock or preset logic. This makes the MC14018BD useful in frequency division, sequence generation, timing, and control systems where a configurable count ratio is required.
The MC14018B family provides five asynchronously presettable and resettable counter stages. Preset is controlled through a logic-high preset-enable input, while reset provides a separate asynchronous clearing function. Synchronous counting occurs on the rising clock edge, allowing counter state to advance predictably under a defined clock source. The distinction between asynchronous control inputs and synchronous counting is important when designing reset, preset, or cascading behavior.
The five counter outputs expose intermediate states of the counting sequence. These outputs can be observed directly for state indication or connected according to the desired divide ratio. Because feedback logic determines the effective modulus, correct wiring and timing must be checked against the manufacturer’s counter configuration and truth-table guidance.
Typical uses include digital timing dividers, programmable sequence counters, clock-frequency division, industrial timing modules, and embedded control logic. The SOIC-16 surface-mount package supports compact PCB layouts, while the positive-edge clock architecture works naturally with rising-edge clock sources and standard CMOS control signals.
When laying out the circuit, keep clock and control traces short, provide a stable supply reference, and avoid routing sensitive counter outputs directly through long traces adjacent to high-switching nodes. Decoupling should follow the manufacturer’s recommended application guidance. Because preset and reset are asynchronous, their pulse widths and settling behavior should be reviewed before using them for short control pulses.
This product record combines the manufacturer function description, package and counter classification, sourcing fields, and practical implementation guidance. It also identifies compatible MC14018-family alternatives while clearly separating confirmed drop-in options from related parts that require different packages or function verification.
Pilihan pengganti yang segera untuk MC14018BD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
MC14018BDG
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC14018BALDS
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
HCF4018BMY
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC14018BD Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Presettable divide-by-N counter |
| Logic Family | CMOS |
| Counter Architecture | 5-stage Johnson counter |
| Number of Counter Stages | 5 stages |
| Counter Output Width | 5 bits |
| Clock Edge | Positive-going edge |
| Counting Mode | Synchronous |
| Preset Function | Asynchronous |
| Reset Function | Asynchronous |
| Preset Enable Logic | Logic 1 |
| Kemasan | 16-pin SOIC |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MC14018BD 16-pin soic
Konfigurasi pin untuk MC14018BD (16-pin soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MC14018BD.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC14018BD patut untuk 6 aplikasis: Programmable Frequency Dividers, Industrial Timing Sequences, Digital State Generators, Clock and Pulse-Rate Conditioning, Embedded Control Sequencing, Laboratory and Test Equipment Timing.
Programmable Frequency Dividers
The MC14018BD fits programmable clock-division circuits because its five Johnson counter stages increment synchronously on each positive-going clock edge. Connecting the appropriate counter output into the feedback path establishes the divide-by-N behavior, while reset provides a deterministic starting state. This arrangement is useful for reducing a system clock into slower timing domains in control and sequencing logic. The five available stage outputs provide flexibility in selecting a modulus, but the feedback connection must match the manufacturer’s truth table. Engineers should also verify the maximum operating clock rate and account for propagation delays around the feedback path when operating near the device’s timing limits.
Disebarkan
Industrial Timing Sequences
The MC14018BD is appropriate for industrial timing modules that require repeatable event sequencing rather than ordinary binary up-counting. Its Johnson-counter output sequence changes one state at a time, which can produce predictable one-hot-like sequences useful for stepper sequencing, duty-cycle generation, and multi-stage actuator timing. Synchronous positive-edge counting keeps state transitions aligned with a system clock, while asynchronous reset allows the sequence to be cleared immediately when a fault or emergency-stop condition occurs. Supply-voltage and temperature requirements should be checked for the installation environment before releasing the design.
Disebarkan
Digital State Generators
The MC14018BD can generate a fixed sequence of digital states by observing or combining its five counter outputs. Because the internal architecture is a Johnson counter, the outputs advance through a shifted sequence, making the device suitable for cyclic state machines, relay or lamp progressions, and sampling controllers. The positive-going clock edge provides a clear point at which the state advances, and the separate asynchronous preset and reset inputs support initialization and rapid return to a known condition. Use the manufacturer’s functional diagrams to confirm which output combinations represent each valid state and to prevent unintended repeated states.
Disebarkan
Clock and Pulse-Rate Conditioning
The MC14018BD is useful in clock-conditioning and pulse-rate reduction circuits that need a divided clock derived from a clean periodic input. The counter advances synchronously on the rising edge, so each selected feedback configuration defines a stable relationship between input and output transitions. This can create slower enable pulses, retriggerable timing intervals, or synchronization-enable signals for downstream logic. The design must preserve feedback-loop timing margin because counter propagation delay and external routing contribute to the maximum reliable operating frequency. Decoupling and grounded return paths should also be arranged to prevent clock-edge noise from disturbing adjacent control signals.
Disebarkan
Embedded Control Sequencing
The MC14018BD supports embedded sequencing in a controller that must coordinate several discrete events over time. A microcontroller or programmable logic device can generate the clock and control reset or preset, while the MC14018BD advances through a five-stage Johnson sequence and provides multiple status outputs. This division of responsibility reduces timer and state-management effort in the controlling device. Because preset and reset are asynchronous, firmware should release them in a defined order that avoids a race with the clock edge. The selected output must also be checked against the required event order, particularly when cycling or restarting the sequence.
Disebarkan
Laboratory and Test Equipment Timing
The MC14018BD can support repeatable timing windows and stepped test sequences in laboratory or test equipment. Its five outputs provide multiple observation points, allowing a designer to monitor different portions of one counting cycle without multiplying clock-generation circuitry. The synchronous count behavior makes the outputs convenient for synchronous test stimuli, while asynchronous reset supports fast initialization between measurements. For laboratory systems operating across a wide ambient range, confirm the device’s rated temperature range and supply limits from the official datasheet. Signal-integrity practices, including short feedback routes and local supply bypassing, remain important even when clock frequencies are moderate.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MC14018BD — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MC14018BDG | MC14018BALDS | HCF4018BMY |
|---|---|---|---|---|
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
| Brand | onsemi | onsemi | onsemi | STMicroelectronics |
| Logic Family | CMOS | CMOS | CMOS | CMOS |
Penyeberangsung Jelas
- Directly listed as a five-bit positive-edge divide-by-N counter (vsHCF4018BMY)
- Same-family drop-in candidate with matching package and counter classification (vsMC14018BDG)
- Five Johnson stages with separate asynchronous preset and reset (vsMC14018BALDS)
Catatan Desain
Keep the clock path and the selected counter-output feedback route short and isolated from analog or high-current switching paths. Johnson-counter feedback creates a closed timing loop, so added trace length reduces margin and can make operation sensitive to clock-edge noise. Route the five counter outputs according to the required state mapping, maintain a continuous ground reference beneath the device, and avoid stubs that act as unintended antennas.
Do not treat preset and reset as ordinary synchronous commands. The MC14018B family controls these functions asynchronously, so a pulse can change counter state independently of the clock. Define reset release relative to the clock source, observe the manufacturer’s pulse-width requirements, and ensure the preset-enable input is driven to a defined inactive level during ordinary counting. Miswired or floating feedback inputs can produce repeated states rather than the intended divide ratio.
Use a stable supply and place the local bypass capacitor close to the device’s supply and ground pins. Because switching-edge current flows through the supply loop, excessive loop area can couple clock noise into adjacent signals. Follow the manufacturer’s recommended decoupling network and avoid sharing long supply paths with high-current loads. Verify input-voltage tolerance and output-driving requirements against the load before finalizing the power architecture.
Maklumat Kesediaan
No specific environmental or automotive compliance statements were included in the cited product and search records. Confirm the current declarations using the exact onsemi ordering code and manufacturer documentation.