AD677AD vs AD677JN Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci AD677AD disebabkan oleh Analog Devices dan AD677JN disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Analog Devices
AD677AD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677AD ⚠ Bahagian terakhir untuk beliAnalog Devices
AD677JN - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677JN ⚠ Bahagian terakhir untuk beliPengandingan Spesifikasi
| Parametr | AD677AD | AD677JN |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Masa Terakhir Dibeli | Masa Terakhir Dibeli |
| Pemecahkatan | 16 bit | 16 bit |
| kadar sampling | 100 kSPS | — |
| Total Conversion Time | 10 us | 10 µs |
| Input Count | 1 analog input | — |
| ADC Architecture | Successive-approximation-register (SAR) | — |
| Internal Architecture | Switched-capacitor charge redistribution | — |
| Jenis Output | Serial | Serial output |
| Calibration | On-chip autocalibration with digital nonlinearity correction | — |
| Kemasan | 16-lead ceramic DIP (CDIP) | 16-pin narrow plastic DIP |
| Jenis Pemasangan | Through-hole | Through-hole |
| Gambaran Tegangan Masukan | [DATA_NEEDED: Input voltage range] | — |
| Tegangan Rujukan | [DATA_NEEDED: External reference voltage] | — |
| Analog Input Type | [DATA_NEEDED: Unipolar or bipolar input configuration] | — |
| Integral Nonlinearity | [DATA_NEEDED: Integral nonlinearity] | — |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | — |
| Effective Number of Bits | [DATA_NEEDED: Effective number of bits] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| Input Sampling Capacitance | [DATA_NEEDED: Input sampling capacitance] | — |
| Digital Interface Levels | [DATA_NEEDED: Digital logic input and output levels] | — |
| Serial Clock Frequency | [DATA_NEEDED: Maximum serial clock frequency] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | — |
| Power Consumption | [DATA_NEEDED: Typical and maximum power consumption] | — |
| Package Dimensions | [DATA_NEEDED: Ceramic DIP package dimensions] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: Lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Conversion Rate | — | 100 kSPS |
| Architecture | — | Switched-capacitor / charge-redistribution ADC |
| Sample-and-Hold | — | On-chip sample-and-hold function |
| Missing Codes | — | No missing codes |
| Full-Power Bandwidth | — | 1 MHz |
| Total Harmonic Distortion | — | -99 dB |
| Signal-to-Noise Plus Distortion | — | 92 dB |
| Analog Supply | — | +5 V and +12 V |
| Digital Supply | — | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] |
| Typical Power Consumption, 10 V Reference | — | 450 mW during conversion |
| Typical Power Consumption, 5 V Reference | — | 360 mW during conversion |
| Ground Sensing | — | Remote analog-ground sense |
| Autocalibration | — | On-chip autocalibration |