AD677AD vs AD677JN مقایسه
مقایسه دقیق کنار به کنار AD677AD توسط Analog Devices و AD677JN توسط Analog Devices. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | AD677AD | AD677JN |
|---|---|---|
| برند | Analog Devices | Analog Devices |
| دسته‌بندی | ADC/DAC | ADC/DAC |
| وضعیت چرخه عمر | آخرین فرصت خرید | آخرین فرصت خرید |
| رزولوشن | 16 bit | 16 bit |
| نرخ نمونه‌برداری | 100 kSPS | — |
| Total Conversion Time | 10 us | 10 µs |
| Input Count | 1 analog input | — |
| ADC Architecture | Successive-approximation-register (SAR) | — |
| Internal Architecture | Switched-capacitor charge redistribution | — |
| نوع خروجی | Serial | Serial output |
| Calibration | On-chip autocalibration with digital nonlinearity correction | — |
| بسته‌بندی | 16-lead ceramic DIP (CDIP) | 16-pin narrow plastic DIP |
| نوع نصب | Through-hole | Through-hole |
| محدوده ولتاژ ورودی | [DATA_NEEDED: Input voltage range] | — |
| ولتاژ مرجع | [DATA_NEEDED: External reference voltage] | — |
| Analog Input Type | [DATA_NEEDED: Unipolar or bipolar input configuration] | — |
| Integral Nonlinearity | [DATA_NEEDED: Integral nonlinearity] | — |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | — |
| Effective Number of Bits | [DATA_NEEDED: Effective number of bits] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| Input Sampling Capacitance | [DATA_NEEDED: Input sampling capacitance] | — |
| Digital Interface Levels | [DATA_NEEDED: Digital logic input and output levels] | — |
| Serial Clock Frequency | [DATA_NEEDED: Maximum serial clock frequency] | — |
| محدوده دمای کاری | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | — |
| Power Consumption | [DATA_NEEDED: Typical and maximum power consumption] | — |
| Package Dimensions | [DATA_NEEDED: Ceramic DIP package dimensions] | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: Lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Conversion Rate | — | 100 kSPS |
| Architecture | — | Switched-capacitor / charge-redistribution ADC |
| Sample-and-Hold | — | On-chip sample-and-hold function |
| Missing Codes | — | No missing codes |
| Full-Power Bandwidth | — | 1 MHz |
| Total Harmonic Distortion | — | -99 dB |
| Signal-to-Noise Plus Distortion | — | 92 dB |
| Analog Supply | — | +5 V and +12 V |
| Digital Supply | — | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] |
| Typical Power Consumption, 10 V Reference | — | 450 mW during conversion |
| Typical Power Consumption, 5 V Reference | — | 360 mW during conversion |
| Ground Sensing | — | Remote analog-ground sense |
| Autocalibration | — | On-chip autocalibration |