BTS3046SDRATMA1 vs BSP742RXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS3046SDRATMA1 disebabkan oleh Infineon dan BSP742RXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS3046SDRATMA1 | BSP742RXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | 5 V to 34 V |
| Load Type | Low-side switch (ground-referenced load) | — |
| Kemasan | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40 C to +150 C | -40°C to +150°C (TJ) |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Tetstruktur | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |