BTS52004EKAXUMA1 vs BTT60101ERBXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS52004EKAXUMA1 disebabkan oleh Infineon dan BTT60101ERBXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTS52004EKAXUMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Tetstruktur | High-Side, 1:1 N-Channel MOSFET with charge pump | N-Channel vertical MOSFET with charge pump |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | Status pin (ST) and current sense (IS) |
| Gambaran Suhu Operasi | -40 °C to +150 °C junction | -40 °C to +150 °C |
| Kemasan | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | — |
| Aras MSL | 3 (per JEDEC J-STD-020) | — |
| Status RoHS | Compliant | — |
| On-State Resistance (Typ) | — | 10 mΩ |
| Continuous Load Current | — | 9 A |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Input Control Logic | — | Active High |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |