BTS52004EKAXUMA1 vs BTT60101ERBXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS52004EKAXUMA1 tarafından Infineon ve BTT60101ERBXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ AktifÖzellik Karşılaştırması
| Parametre | BTS52004EKAXUMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| Ağ Yapısı | High-Side, 1:1 N-Channel MOSFET with charge pump | N-Channel vertical MOSFET with charge pump |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | Status pin (ST) and current sense (IS) |
| İşletim Sıcaklığı Aralığı | -40 °C to +150 °C junction | -40 °C to +150 °C |
| Paket | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | — |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | — |
| RoHS Durumu | Compliant | — |
| On-State Resistance (Typ) | — | 10 mΩ |
| Continuous Load Current | — | 9 A |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Input Control Logic | — | Active High |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |