BTS70101EPAXUMA1 vs BTS70041EPZXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS70101EPAXUMA1 disebabkan oleh Infineon dan BTS70041EPZXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS70101EPAXUMA1 | BTS70041EPZXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET+2 (SMART7) | — |
| Configuration | 1:1 (single channel) | — |
| Switch Type | N-Channel High-Side | High-Side N-Channel Power Switch (1:1) |
| Nominal Load Current | 9 A | — |
| Operating Voltage Range | 6 V to 18 V | — |
| Load Dump Tolerance | >40 V | — |
| Reverse Battery Protection | Yes (ReverSave, integrated) | — |
| Current Sense Output | Yes (proportional IS pin) | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| Pengumpasan Panas | Yes | — |
| Over-Current Behavior | Latch with auto-restart | — |
| Kemasan | PG-TSDSO-14-22 (TSSOP-14 EP) | PG-TDSO-14-11 (14-pin, exposed thermal pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 | — |
| Status RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies AG |
| Series | — | PROFET®+2 (Automotive, AEC-Q100) |
| Number of Channels | — | 1 |
| Maximum Continuous Load Current | — | 15 A |
| Operating Voltage Range (Vbb) | — | 3.1 V to 28 V |
| Reverse Battery Robustness | — | -28 V on Vbb |
| On-State Resistance R_DS(on) | — | [DATA_NEEDED: R_DS(on) typical in mΩ] |
| Current Limitation | — | Active, with latch clear via DEN pulse |
| Overtemperature Protection | — | Yes (thermal shutdown with auto-restart) |
| Short-Circuit Protection | — | Yes (current-limit and latch) |
| Diagnostic Output | — | DEN pin (digital/analog fault feedback) |
| Input Pin (IN) | — | Logic-level control, 3.3 V / 5 V compatible |
| Operating Temperature Range (TJ) | — | -40 °C to +175 °C |
| Aras MSL | — | MSL 2A (4 weeks) |
| Qualification | — | AEC-Q100 (automotive grade) |
| Packaging | — | Tape & Reel |