INA110KU vs INA114BU Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA110KU disebabkan oleh Texas Instruments dan INA114BU disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | INA110KU | INA114BU |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Monolithic FET-input instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain Settings | 1, 10, 100, 200, and 500 V/V | — |
| Bandwidth | 2.5 MHz | — |
| Settling Time | 4 us to 0.01% | 600 ns |
| Slew Rate | 17 V/us | 0.06 V/µs |
| Input Offset Voltage | 1 mV | 50 uV |
| Supply Voltage Range | 12 V to 36 V | 2.25 V to 18 V |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Impedance | Very high input impedance | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Kemasan | 16-pin SOIC (SOL-16) | 16-pin SOIC |
| Package Width | 7.50 mm | — |
| Jenis Pemasangan | Surface mount | Surface mount |
| Architecture | Current-feedback circuit topology | Three-op-amp design |
| Input Stage | Laser-trimmed FET input stage | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain Range | — | 1 to 10,000 |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |