INA110KU vs INA114BU Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA110KU tarafından Texas Instruments ve INA114BU tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA110KU | INA114BU |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Monolithic FET-input instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain Settings | 1, 10, 100, 200, and 500 V/V | — |
| Bandwidth | 2.5 MHz | — |
| Settling Time | 4 us to 0.01% | 600 ns |
| Slew Rate | 17 V/us | 0.06 V/µs |
| Input Offset Voltage | 1 mV | 50 uV |
| Supply Voltage Range | 12 V to 36 V | 2.25 V to 18 V |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Impedance | Very high input impedance | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Paket | 16-pin SOIC (SOL-16) | 16-pin SOIC |
| Package Width | 7.50 mm | — |
| Montaj Türü | Surface mount | Surface mount |
| Architecture | Current-feedback circuit topology | Three-op-amp design |
| Input Stage | Laser-trimmed FET input stage | — |
| RoHS Durumu | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain Range | — | 1 to 10,000 |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |