INA110KU vs INA114BU 비교

다음의 상세 나란히 비교: INA110KU 제조: Texas Instruments 및 INA114BU 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
INA114BU INA114BU - 1MHz Precision Instrumentation Amplifier | TI

INA114BU - 1MHz Precision Instrumentation Amplifier | TI

INA114BU ✓ 활성

사양 비교

파라미터 INA110KU INA114BU
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Product Type Monolithic FET-input instrumentation amplifier Low-cost, general-purpose precision instrumentation amplifier
Number of Circuits 1 circuit 1 circuit
Gain Settings 1, 10, 100, 200, and 500 V/V —
Bandwidth 2.5 MHz —
Settling Time 4 us to 0.01% 600 ns
Slew Rate 17 V/us 0.06 V/µs
Input Offset Voltage 1 mV 50 uV
Supply Voltage Range 12 V to 36 V 2.25 V to 18 V
Input Bias Current [DATA_NEEDED: input bias current] —
Input Impedance Very high input impedance —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
동작 온도 범위 [DATA_NEEDED: operating temperature range] -40°C to +85°C
패키지 16-pin SOIC (SOL-16) 16-pin SOIC
Package Width 7.50 mm —
실장 유형 Surface mount Surface mount
Architecture Current-feedback circuit topology Three-op-amp design
Input Stage Laser-trimmed FET input stage —
RoHS 상태 unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
Amplifier Type — Precision instrumentation amplifier
Gain-Bandwidth Product — 1 MHz
Input Noise Density — 11 nV/√Hz
Typical Supply Current — 3 mA
Gain Range — 1 to 10,000
Gain-Setting Method — One external resistor
Input Protection Range — ±40 V

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청