ISO1430DWR vs ISO1450BDWR Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ISO1430DWR disebabkan oleh Texas Instruments dan ISO1450BDWR disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktifPengandingan Spesifikasi
| Parametr | ISO1430DWR | ISO1450BDWR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Gambaran Suhu Operasi | -40°C to +125°C | — |
| Kemasan | 16-pin SOIC (DW) | SOIC-16 wide-body (DW), 16 pins |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fungsi | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Pengumpasan Panas | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Suhu Operasi | — | -40C to +125C |
| Aras MSL | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |