ISO1430DWR vs ISO1450BDWR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1430DWR sa pamamagitan ng Texas Instruments at ISO1450BDWR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ISO1430DWR | ISO1450BDWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Hanay ng Temperature na Operasyon | -40°C to +125°C | — |
| Packhaging | 16-pin SOIC (DW) | SOIC-16 wide-body (DW), 16 pins |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fungsi | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Thermal Shutdown | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Temperature na Operasyon | — | -40C to +125C |
| Level ng MSL | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |