KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
MPN: KSZ9031RNXCA ✓ AktifKSZ9031RNXCA Ringkasan
An Ethernet PHY is the physical-layer component that converts digital frames into electrical signaling for copper cables and reconstructs incoming signals for the host controller. The PHY occupies the boundary between the MAC or RGMII interface in a network processor and the transformer-coupled Ethernet cable. The KSZ9031RNXCA supports three speed levels within one integrated transceiver, allowing the same board design to accommodate 10 Mbps, 100 Mbps, and 1 Gbps links.
The KSZ9031RNXCA combines automotive qualification, LinkMD diagnostics, and RGMII integration in one compact package. Its three supported supply voltages permit compatibility with systems operating from 1.8 V, 2.5 V, or 3.3 V, while the 7 mm by 7 mm QFN construction reduces board area compared with larger Ethernet PHYs. The MODE[3:0] strap inputs establish the startup operating mode, and the RESET_N input provides a hardware reset path for initialization and system control.
Its internal organization supports copper auto-negotiation, physical coding, and reception across the IEEE speed families used for Gigabit Ethernet. A 1.2 V analog core supply is required by the device architecture and is specifically associated with pins 4 and 9. Microchip’s KSZ9031RNX hardware design checklist describes ferrite-bead isolation and both bulk and local decoupling for this rail. These implementation details are important because inadequate analog-supply filtering can degrade signal integrity or margin.
Typical applications include industrial Ethernet controllers, automotive infotainment and connectivity modules, embedded Linux platforms, industrial automation equipment, and network switches requiring one port with backward compatibility to 100Base-TX and 10Base-T. The RGMII interface reduces parallel bus complexity relative to an MII implementation while retaining deterministic host-to-PHY signaling for Gigabit throughput.
A critical design requirement is to preserve the distinction among the 1.8 V, 2.5 V, and 3.3 V supply domains and the separately generated 1.2 V analog rail. Place the prescribed bulk and high-frequency capacitors near their associated pins, keep the ferrite bead close to the AVDDL connection, and follow the manufacturer’s pin and layout guidance. External Ethernet magnetics, magnetic-interface isolation, clocking, and the selected RGMII host controller must also be designed as part of the complete interface.
This product data combines the KSZ9031RNXCA datasheet, hardware design checklist, manufacturer product page, lifecycle information, and compatible same-family conversion information with practical guidance for power partitioning, reset, diagnostics, and high-speed layout. It is intended to accelerate component selection while preserving the distinction between a confirmed pin-compatible replacement and a merely similar Ethernet transceiver.
Pilihan pengganti yang segera untuk KSZ9031RNXCA — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera KSZ9031RNXCA (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Data Rate, Auto-Negotiation, Cable Type.
KSZ9031RNXIA
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →KSZ9031RNXIC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →KSZ9031RNXCC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →KSZ9031RNXCA Spesifikasi
| Product Type | Gigabit Ethernet physical-layer transceiver |
| Supported Speeds | 10 Mbps, 100 Mbps, and 1 Gbps |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, and 1000Base-T |
| Host Interface | RGMII |
| Data Path | 4-wire full-duplex Ethernet |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Analog Core Supply | 1.2 V |
| Kemasan | 48-pin QFN, 7 mm x 7 mm |
| Jenis Pemasangan | Surface mount |
| Cable Diagnostics | LinkMD |
| Time-Domain Reflectometry Diagnostics | Supported TDR-based cable testing |
| Mode Configuration | MODE[3:0] strap inputs |
| Hardware Reset Input | RESET_N, pin 42 |
| Automotive Qualification | Automotive qualified |
| AVDDL Bulk Capacitance | 10 uF |
| AVDDL Local Decoupling | 0.1 uF per AVDDL pin |
| AVDDL Ferrite Bead Impedance | 100 ohm to 220 ohm at 100 MHz |
Panduan Konfigurasi Pin KSZ9031RNXCA 48-pin qfn, 7 mm x 7 mm
Konfigurasi pin untuk KSZ9031RNXCA (48-pin qfn, 7 mm x 7 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk KSZ9031RNXCA.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
KSZ9031RNXCA patut untuk 6 aplikasis: Automotive Ethernet Connectivity, Industrial Automation Ethernet, Embedded Linux Network Platform, Industrial Network Switch Port, Test and Measurement Instrumentation, Network Security Gateway.
Automotive Ethernet Connectivity
The KSZ9031RNXCA fits an automotive Ethernet port that must support 10Base-T, 100Base-TX, and 1000Base-T while communicating with an RGMII-capable host controller. Its automotive-qualified status, 48-pin 7 mm by 7 mm QFN package, and 1.8 V, 2.5 V, or 3.3 V supply options support compact vehicle-networking designs. LinkMD and TDR-based diagnostics can help installation and service teams locate cable or connector faults. The design must implement the separate 1.2 V analog rail, ferrite-bead isolation, local decoupling, Ethernet magnetics, and all layout requirements from the manufacturer’s hardware design checklist.
Disebarkan
Industrial Automation Ethernet
The KSZ9031RNXCA is suitable for industrial controllers that must connect to 10 Mbps, 100 Mbps, and 1 Gbps Ethernet equipment through one RGMII interface. Backward-compatible speed support helps bridge older supervisory stations, sensors, and production equipment while preserving a path to Gigabit bandwidth. The integrated LinkMD and TDR-based diagnostics provide useful installation and maintenance information in cabinets where cable faults can be difficult to diagnose. Power planning must account for the 1.2 V analog core rail, while the compact 7 mm by 7 mm QFN package helps preserve board area in densely populated industrial control equipment.
Disebarkan
Embedded Linux Network Platform
The KSZ9031RNXCA can serve as the Gigabit copper-network interface in an embedded Linux platform whose host processor exposes RGMII. Supporting 10Base-T through 1000Base-T allows one physical design to connect to development networks, management systems, and high-throughput industrial or server links. The RGMII interface limits parallel data-path wiring compared with older MII arrangements, while LinkMD diagnostics provide link and cable-status information to the network driver. Designers should use strap-selected operating modes, the active-low RESET_N input, the prescribed analog-rail filtering, and a high-speed layout that minimizes noise and timing margin loss.
Disebarkan
Industrial Network Switch Port
The KSZ9031RNXCA supports a copper switch port that must negotiate among 10 Mbps, 100 Mbps, and 1 Gbps links. Its RGMII host connection suits switching silicon with a compatible parallel interface, while the small 48-pin QFN package allows multiple ports to be placed on a space-constrained board. The device’s three supported supply voltages provide flexibility across different digital logic domains, but each rail still requires correct sequencing and decoupling. LinkMD and TDR-based cable diagnostics can help managed-network equipment report installation faults and distinguish remote-end problems from local PHY problems during commissioning.
Disebarkan
Test and Measurement Instrumentation
The KSZ9031RNXCA can provide a backward-compatible Gigabit Ethernet connection in instruments that exchange data with workstations, test systems, or service tools. A single PHY supporting 10Base-T, 100Base-TX, and 1000Base-T lets the instrument connect reliably to older laboratory infrastructure as well as high-speed networks. LinkMD can provide link and cabling information, while TDR-based diagnostics offer additional fault-localization capability. The implementation should isolate the 1.2 V analog core supply with the manufacturer-recommended ferrite bead and place both 10 uF bulk and 0.1 uF local capacitors close to their assigned pins.
Disebarkan
Network Security Gateway
The KSZ9031RNXCA fits security gateways and network appliances that need a copper Gigabit Ethernet port with compatibility for slower legacy devices. RGMII provides a deterministic host interface, and support for 10Base-T, 100Base-TX, and 1000Base-T broadens deployment flexibility in mixed enterprise and industrial environments. Diagnostic functions can assist field technicians with link establishment and cable-fault troubleshooting. Careful partitioning of the 1.8 V, 2.5 V, 3.3 V, and 1.2 V supply domains is necessary to prevent digital activity from coupling into sensitive analog circuits, while controlled clocking and short, impedance-managed RGMII routes protect signal integrity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk KSZ9031RNXCA — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | KSZ9031RNXIA | KSZ9031RNXIC | KSZ9031RNXCC |
|---|---|---|---|---|
| Package | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Data Rate | 1 Gbps | 1 Gbps | 1 Gbps | 1 Gbps |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, 1000Base-T | 10Base-T, 100Base-TX, 1000Base-T | 10Base-T, 100Base-TX, 1000Base-T | 10Base-T, 100Base-TX, 1000Base-T |
| Host Interface | RGMII | RGMII | RGMII | RGMII |
| Operating Supply Options | 1.8 V, 2.5 V, 3.3 V | 1.8 V, 2.5 V, 3.3 V | 1.8 V, 2.5 V, 3.3 V | 1.8 V, 2.5 V, 3.3 V |
| Analog Core Supply | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Cable Diagnostics | LinkMD and TDR-based diagnostics | LinkMD and TDR-based diagnostics | LinkMD and TDR-based diagnostics | LinkMD and TDR-based diagnostics |
| Mode Configuration | MODE[3:0] strap inputs | MODE[3:0] strap inputs | MODE[3:0] strap inputs | MODE[3:0] strap inputs |
Penyeberangsung Jelas
- Integrated triple-speed support (vsKSZ9031RNXIC)
- Cable-fault diagnostics are integrated (vsKSZ9031RNXCC)
- Compact multi-voltage PHY footprint (vsKSZ9031MNXIC)
Catatan Desain
Implement the 1.2 V AVDDL rail exactly as described in Microchip’s KSZ9031RNX hardware design checklist. Pins 4 and 9 use a generally suitable 100 ohm to 220 ohm ferrite bead at 100 MHz. Place a 10 uF bulk capacitor on the supply line, add 0.1 uF local decoupling at each AVDDL pin, and install bulk capacitance on both sides of the bead. Keep the analog ground return short and isolated from high-current switching paths so digital supply activity does not disturb the PHY’s analog core.
Follow the manufacturer’s KSZ9031RNX layout and grounding guidance for the 48-pin QFN, particularly the exposed thermal pad, RGMII nets, clock input, and analog supply. Place decoupling capacitors directly beside their associated pins and minimize loop area. Keep the RGMII interface short, provide a continuous ground reference, and use controlled-impedance routing where the host and PHY operate at their specified signaling rates. Avoid routing sensitive analog or clock nets beneath noisy digital and power-conversion sections.
Do not substitute a 100-pin KSZ9031MNXIC for this 48-pin RNX device. The MNXIC uses a different 12 mm by 12 mm package and therefore a different PCB land pattern. The RNXIA, RNXCA, RNXIC, and RNXCC ordering-code conversion also does not automatically transfer a product qualification decision; review temperature grade, automotive status, lifecycle, and production notices before approving a substitution.
Treat RESET_N, MODE[3:0], the reference clock, and RGMII as controlled interface signals rather than ordinary logic. Observe the datasheet’s strap levels and reset timing because incorrect strap values can select an unintended startup mode or keep the device in a special power-down state. Confirm the host clock and RGMII timing configuration before release, and validate the completed board for signal margin, impedance, crosstalk, and radiated emissions rather than relying only on schematic connectivity.
Maklumat Kesediaan
Microchip identifies the KSZ9031 as automotive qualified. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact ordering code require confirmation from the manufacturer.