LM393AM vs LM293AM Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM393AM disebabkan oleh onsemi dan LM293AM disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM393AM | LM293AM |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Single-Supply Operating Voltage | 36 V maximum | — |
| Dual-Supply Operating Voltage | ±18 V maximum | — |
| Current Drain | 800 µA typical | — |
| Input Bias Current | 25 nA typical | — |
| Jenis Output | Open collector | Open-collector, open-drain |
| Logic Compatibility | Compatible with all forms of logic | Compatible with TTL, MOS, and CMOS logic |
| Ground-Level Comparison | Supported | — |
| Kemasan | 8-SOIC | 8-pin SOIC |
| Package Width | 3.90 mm (0.154 inch) | — |
| Jenis Pemasangan | Surface mount | Surface mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Single-Supply Operating Range | — | Up to 36 V |
| Dual-Supply Operating Range | — | Up to ±18 V |
| Typical Low Current Drain | — | 800 µA |
| Typical Input Bias Current | — | 25 nA |
| Common-Mode Input Capability | — | Comparison of voltages near ground potential |
| Arus Pemberi Arus | — | [DATA_NEEDED: maximum supply current] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |