LM393AM vs LM293AM Comparação
Comparação detalhada lado a lado de LM393AM por onsemi e LM293AM por onsemi. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | LM393AM | LM293AM |
|---|---|---|
| Marca | onsemi | onsemi |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Single-Supply Operating Voltage | 36 V maximum | — |
| Dual-Supply Operating Voltage | ±18 V maximum | — |
| Current Drain | 800 µA typical | — |
| Input Bias Current | 25 nA typical | — |
| Tipo de saída | Open collector | Open-collector, open-drain |
| Logic Compatibility | Compatible with all forms of logic | Compatible with TTL, MOS, and CMOS logic |
| Ground-Level Comparison | Supported | — |
| Encapsulamento | 8-SOIC | 8-pin SOIC |
| Package Width | 3.90 mm (0.154 inch) | — |
| Tipo de montagem | Surface mount | Surface mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Single-Supply Operating Range | — | Up to 36 V |
| Dual-Supply Operating Range | — | Up to ±18 V |
| Typical Low Current Drain | — | 800 µA |
| Typical Input Bias Current | — | 25 nA |
| Common-Mode Input Capability | — | Comparison of voltages near ground potential |
| Corrente de alimentação | — | [DATA_NEEDED: maximum supply current] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |