MAX14882AWE+T vs ADM2567EBRNZ Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MAX14882AWE+T disebabkan oleh Analog Devices dan ADM2567EBRNZ disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Analog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ AktifAnalog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ AktifPengandingan Spesifikasi
| Parametr | MAX14882AWE+T | ADM2567EBRNZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Isolated high-speed CAN transceiver | — |
| Kadar Data | 1 Mbps | — |
| Isolation Voltage | 5 kVRMS | 3000 V rms |
| Controller-side Supply (VDDA) | 3.0 V to 5.5 V | — |
| Bus-side Supply (VDDB) | 4.5 V to 5.5 V | — |
| Receiver Input Common-Mode Range | -25 V to +25 V | — |
| Bus Fault Tolerance (CANH/CANL) | +/-54 V | — |
| ESD Protection (Bus-side, HBM) | +/-15 kV | — |
| Integrated LDO Output Current | 300 mA (max), 130 mA to internal load | — |
| Number of Drivers/Receivers | 1/1 (Half-Duplex CAN) | — |
| Gambaran Suhu Operasi | -40 C to +125 C | [DATA_NEEDED: Operating temperature range] |
| Kemasan | 16-pin Wide-body SOIC (W SOIC) | 28-pin SOIC-W (0.295", 7.50 mm body width) |
| Creepage and Clearance | 8 mm | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Standard | ISO 11898-2 compliant CAN | — |
| Status RoHS | Compliant | Compliant |
| Data Rate (max) | — | 25 Mbps |
| Number of Channels | — | 4 (signal isolation) |
| Common-Mode Transient Immunity (CMTI) | — | 250 kV/us |
| Bus ESD (IEC 61000-4-2, contact) | — | ±15 kV (bus pins) |
| Bus ESD (IEC 61000-4-2, air) | — | ±15 kV |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | — | ±6 kV |
| Protocol | — | RS-422 / RS-485 |
| Logic-Side Supply (VIO) | — | 1.7 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) |
| Number of Drivers / Receivers | — | 1 / 1 |