PN7160A1HN vs PN7161A1HN Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci PN7160A1HN disebabkan oleh NXP Semiconductors dan PN7161A1HN disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | PN7160A1HN | PN7161A1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Modules | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | — |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | NCI 1.0 over I2C |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | Up to 1.5 W into antenna load |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Kemasan | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | — |
| Moisture Sensitivity Level | MSL 3 | — |
| Status RoHS | Compliant | Compliant |
| Suhu Operasi | -30 C to +85 C | -40 C to +85 C |
| Fungsi | — | NFC Controller with NCI interface |
| RF Frequency | — | 13.56 MHz |
| Operating Voltage (VCC) | — | 1.65 V to 3.6 V |
| Operating Voltage (VBAT variant) | — | 3.0 V to 5.5 V |
| Reader/Writer Mode | — | Yes |
| P2P / Card Emulation | — | Yes |
| Apple ECP Support | — | Yes (authorization required) |
| Integrated Firmware | — | Yes (loaded via I2C) |
| Cryptographic Acceleration | — | AES-128, Crypto1 |
| LPCD Current | — | ~100 uA |
| Aras MSL | — | 3 |