SN65HVD3085EDR vs SN65LBC176DR Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SN65HVD3085EDR disebabkan oleh Texas Instruments dan SN65LBC176DR disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
SN65LBC176DR - 10Mbps RS-485 Transceiver 5V | Texas Instruments
SN65LBC176DR ✓ AktifPengandingan Spesifikasi
| Parametr | SN65HVD3085EDR | SN65LBC176DR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | $0.32 | $1.27 |
| Protocol | RS-485, RS-422 (TIA/EIA-485A compliant) | — |
| Duplex Mode | Half-duplex | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Tegangan Pemberi Arus | 4.5 V to 5.5 V | 5 V (nominal) |
| Signaling Rate | Up to 20 Mbps | 10 Mbps (max) |
| Suhu Operasi | -40C to +85C | -40C to +85C |
| Kemasan | SOIC (D), 8 pins | 8-SOIC (D), 3.90 mm width |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Receiver Hysteresis | Specified in manufacturer datasheet | — |
| Bus Pin ESD / Fault Tolerance | Per TIA/EIA-485A requirements | — |
| Driver Output Transition Time | Controlled (slew-limited for long cables) | — |
| Isolation | None (non-isolated) | — |
| Fungsi | Low-power half-duplex RS-485 transceiver | Half-duplex RS-485/RS-422 transceiver |
| Standard Packaging | Tape & Reel (R suffix) | — |
| Status RoHS | Compliant (per Abacus Technologies listing) | Compliant |
| REACH Status | Compliant (per Abacus Technologies listing) | — |
| Duplex | — | Half |
| Transmitters / Receivers | — | 1 / 1 |
| Protocol Compliance | — | ANSI TIA/EIA-485 (RS-485), ISO 8482:1987 (E) |
| Fault Protection | — | -10 V to 15 V common-mode bus range |
| Driver Enable | — | DE, active-high |
| Receiver Enable | — | RE, active-low |
| Technology | — | LinBiCMOS, low skew |
| Bilangan Pin | — | 8 |
| Bus Loading | — | Up to 32 unit loads (multipoint) |