Analog Devices

AD510JH/+ - 100V/us Precision Operational Amplifier | Analog Devices

MPN: AD510JH/+ ✗ Akhir Hayat
100 uV Vdss 10 mA Id TO-99-8 Package
MOQ: 1 |

AD510JH/+ Ringkasan

The Analog Devices AD510JH/+ is a single-channel, internally compensated precision operational amplifier with a 100 V/us slew rate, 100 uV maximum offset voltage, and a TO-99-8 metal-can package. Designed around a bipolar input stage, it combines 25 nA input bias current with 94 dB open-loop gain for signal conditioning and precision analog control applications.

An operational amplifier is a voltage-gain building block used to amplify, buffer, filter, or compare small analog signals. The AD510 belongs to the precision op-amp hierarchy, where low offset voltage, low bias current, and high open-loop gain are prioritized over rail-to-rail operation or wide common-mode range. Its 10 nV/sqrt(Hz) input-noise specification makes it suitable for instrumentation and sensor-interface circuits where the input signal is small relative to system noise.

Key electrical characteristics include 100 V/us slew rate, 100 uV maximum input offset voltage, 25 nA maximum input bias current, 5 nA maximum input offset current, and 3 uV/C input offset temperature drift. The amplifier operates over a 0 C to +70 C temperature range and is specified for 10 mA output current. Built-in compensation removes the need for an external compensation network in standard voltage-amplifier configurations.

The AD510 uses a bipolar input architecture, which contributes to its low-noise precision characteristics but requires suitable supply headroom for the chosen output range. The TO-99-8 package is a hermetically sealed, leaded metal-can format commonly associated with older precision analog equipment. Its mechanical format is substantially different from modern surface-mount op-amp packages, so board layout, insertion tooling, and replacement planning must account for the 8-pin cylindrical footprint.

Typical applications include low-level sensor amplification, laboratory instrumentation, process-control loops, bridge-amplifier interfaces, and precision current-to-voltage converters. Its 94 dB open-loop gain supports accurate closed-loop gain when feedback-network resistors are chosen with suitable tolerances. The 100 V/us slew rate also allows faithful reproduction of moderately fast waveforms without external compensation.

For stable operation, follow the recommended feedback and decoupling arrangements in the manufacturer datasheet. Decoupling capacitors should connect close to the supply pins, and unused inputs should be tied to a defined potential rather than left floating. Because this is a bipolar precision amplifier, verify output swing, common-mode range, and load current against the actual supply voltage before finalizing the circuit.

This page consolidates device specifications, package details, comparison information, and practical application guidance for engineers evaluating the AD510JH/+ in legacy or maintenance-oriented analog designs.

Pilihan pengganti yang segera untuk AD510JH/+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera AD510JH/+ (sama faktor bentuk dan kaki) — berbeza dalam Mounting Type, Package.

Analog Devices
Mounting Type: Surface mount
Package: 8-lead SOIC

AD510JH

✅ Masuk Drop-In
📦 TO-99-8
Ordering code omits the trailing /+ designation; listed electrical characteristics remain 100 uV maximum offset, 100 V/us slew rate, and 25 nA maximum bias current

📋 Alternatif rujukan (tidak dalam katalog)

OP-27CJ

✅ Masuk Drop-In
📦 TO-99-8
Precision bipolar TO-99-8 amplifier with a different offset, bias-current, supply-range, and noise specification set requiring circuit-level verification

📋 Alternatif rujukan (tidak dalam katalog)

MXL1001ACH

✅ Masuk Drop-In
📦 TO-99-8
Legacy precision amplifier in the same TO-99-8 format, with device-specific slew rate, offset, noise, bias-current, and supply specifications

📋 Alternatif rujukan (tidak dalam katalog)

AD510JH/+ Penilaian maksimum & Ciri-ciri Elektrik

Number of Channels 1 channel
Amplifier Type General-purpose operational amplifier
Slew Rate 100 V/us
Maximum Input Offset Voltage 100 uV
Output Current 10 mA
Input Voltage Noise Density 10 nV/sqrt(Hz) at 1 kHz
Maximum Input Bias Current 25 nA
Input Offset Temperature Drift 3 uV/C
Arus Pemberi Arus 4 mA
Maximum Input Offset Current 5 nA
Open-Loop Gain 94 dB
Compensation Built-in
Gambaran Suhu Operasi 0 C to +70 C
Input Architecture Bipolar
Kemasan TO-99-8
Jenis Pemasangan Leaded, metal can

Panduan Konfigurasi Pin AD510JH/+ to-99-8

Konfigurasi pin untuk AD510JH/+ (to-99-8 pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai to-99-8 untuk AD510JH/+

Tiada data garisan pin yang diperoleh untuk AD510JH/+.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD510JH/+ patut untuk 6 aplikasis: Precision Sensor Signal Conditioning, Strain-Gauge Bridge Instrumentation, Laboratory Measurement Instruments, Process-Control Loop Amplification, Current-to-Voltage Conversion, Legacy Test and Measurement Equipment.

🏭

Precision Sensor Signal Conditioning

The AD510JH/+ suits low-level sensor conditioning because its 100 uV maximum input offset and 25 nA maximum input bias current limit errors in high-impedance sources. Its 10 nV/sqrt(Hz) input-noise density at 1 kHz also supports careful extraction of small signals. Place it in a non-inverting or differential stage with matched feedback resistors, and calculate the bias-current error against the actual sensor impedance before finalizing the gain.

📊

Strain-Gauge Bridge Instrumentation

A strain-gauge bridge produces a small differential signal that the AD510JH/+ can amplify with its 94 dB open-loop gain and built-in compensation. The device's 25 nA maximum bias current is particularly relevant when the bridge impedance is high, while its 3 uV/C offset drift contributes directly to span error. Match the amplifier inputs and feedback network carefully, and include input-bias and thermal-drift errors in the instrument calibration budget.

🔬

Laboratory Measurement Instruments

The AD510JH/+ is appropriate for laboratory instruments that amplify small voltages around a system reference, including source-measurement and calibration interfaces. Its 100 V/us slew rate preserves moderately fast signal transitions, while internally compensated operation simplifies the implementation of standard closed-loop amplifiers. Use the TO-99-8 construction when maintaining vintage instrument designs, and route supply bypassing close to the device to limit noise pickup.

🏭

Process-Control Loop Amplification

The AD510JH/+ can amplify a low-level error signal in legacy process-control equipment where the loop requires high open-loop gain and controlled offset. Its 94 dB open-loop gain supports accurate feedback performance, and the 100 V/us slew rate allows satisfactory response to many slow control signals. Verify the sensor output range against the amplifier's input common-mode limits and the actuator demand against its output-swing capability.

💡

Current-to-Voltage Conversion

The AD510JH/+ is useful in transimpedance stages for photodiode, optical-power, or electrochemical sensors because low bias current reduces current-conversion error. Its 100 uV maximum offset establishes a meaningful limit for small output voltages, while the 94 dB open-loop gain improves loop control in the inverting configuration. Add the required feedback compensation capacitance and check stability at the intended gain before increasing the transimpedance value.

🖥️

Legacy Test and Measurement Equipment

The TO-99-8 AD510JH/+ is well suited to repair and modernization of older test equipment that used hermetically sealed precision analog packages. Its 100 V/us slew rate, 94 dB open-loop gain, and 0 C to +70 C commercial range align with many laboratory and industrial instruments. Maintain the original 8-lead metal-can footprint or redesign explicitly, and validate offset, bias current, noise, and supply behavior against the original circuit.

Ringkasan Produk Disebarkan

AD510JH Same precision amplifier ordering configuration Dipergunakan di: Precision Sensor Signal Conditioning, Strain-Gauge Bridge Instrumentation, Process-Control Loop Amplification, Current-to-Voltage Conversion OP-27CJ Legacy precision amplifier comparison candidate Dipergunakan di: Precision Sensor Signal Conditioning, Laboratory Measurement Instruments, Current-to-Voltage Conversion, Legacy Test and Measurement Equipment AD8011ANZ Analog Devices Dipergunakan di: Strain-Gauge Bridge Instrumentation, Process-Control Loop Amplification MXL1001ACH TO-99-8 precision amplifier comparison candidate Dipergunakan di: Laboratory Measurement Instruments, Legacy Test and Measurement Equipment
What are the key specifications of AD510JH/+ that engineers should know?
The AD510JH/+ is a single-channel, internally compensated precision operational amplifier with a 100 V/us slew rate, 100 uV maximum offset voltage, 94 dB open-loop gain, and a TO-99-8 package. Its bipolar input stage provides 25 nA maximum input bias current and 10 nV/sqrt(Hz) input-noise density at 1 kHz. The 0 C to +70 C operating range makes it most appropriate for legacy commercial or industrial instrumentation rather than extended-temperature or automotive systems.
Where can I download the AD510JH datasheet PDF?
The AD510JH datasheet can be located through the Analog Devices product documentation or through the AD510JH datasheet index linked on this page. The document identifies the device as a low-cost, laser-trimmed precision operational amplifier. Use the manufacturer's pin-description table and characteristic curves when assigning PCB connections, checking supply headroom, and confirming common-mode and output-swing limits.
Where is the AD510JH pinout?
The AD510JH uses an 8-lead TO-99 metal-can package, and its complete pin assignment is shown in the manufacturer datasheet. Use that pin-description table when wiring supply, non-inverting input, inverting input, and output connections. Because this leaded cylindrical package differs from modern SOIC and dual in-line op-amp footprints, verify physical compatibility before considering any substitute.
Is the AD510JH/+ suitable for precision sensor amplification?
Yes, the AD510JH/+ is suitable for low-level sensor amplification when its offset, noise, and bias-current characteristics match the sensor impedance. Its 100 uV maximum input offset, 10 nV/sqrt(Hz) noise density at 1 kHz, and 25 nA maximum bias current support high-resolution instrumentation. Bias-current error must be checked against source impedance, and the 0 C to +70 C specification limits harsh-environment use.
What is the difference between AD510JH/+ and OP-27CJ?
AD510JH/+ and OP-27CJ are related precision bipolar amplifiers offered in the legacy TO-99 format, but their electrical specifications are not identical. The AD510JH/+ is identified with 100 uV maximum offset, 100 V/us slew rate, 94 dB open-loop gain, and 25 nA maximum bias current. The available comparison record establishes the two as candidates for substitution, but circuit-level verification of stability, supply range, and bias behavior is still required.
What can replace AD510JH/+?
The most defensible candidates for the AD510JH/+ are the AD510JH ordering form, OP-27CJ, and MXL1001ACH, all of which appear in cross-reference results for this device. Exact drop-in use still depends on verifying the TO-99-8 pin assignment, supply voltages, common-mode range, output swing, noise, offset, and compensation requirements. A mechanical match alone does not guarantee electrical interchangeability.
Is MXL1001ACH a drop-in replacement for AD510JH/+?
MXL1001ACH is listed in a direct comparison against AD510JH and is therefore a candidate replacement, but it should not be treated as automatically interchangeable without schematic review. Confirm that its TO-99 lead arrangement, gain-bandwidth behavior, slew rate, offset voltage, bias current, supply range, and common-mode limits satisfy the application. Keep the original AD510JH/+ footprint and pin mapping as the mechanical reference.
When should I choose AD510JH/+ over OP-27CJ?
Choose the AD510JH/+ when its documented 100 uV maximum offset, 25 nA maximum bias current, 94 dB open-loop gain, and 100 V/us slew rate match the circuit more closely than the alternative. Choose OP-27CJ only after comparing its complete electrical specification with the original design. Because the AD510JH/+ is a legacy packaged product, availability and lifecycle considerations may influence the final decision.
Is AD510JH/+ suitable for bridge-amplifier and strain-gauge interfaces?
The AD510JH/+ can be used in bridge-amplifier and strain-gauge interfaces when its input bias current is low enough for the bridge impedance and its offset drift is acceptable for the measurement accuracy. The specified 3 uV/C offset drift and 100 uV maximum offset are the principal limits to evaluate. Use matched resistors and consider a ratiometric or higher-grade instrumentation amplifier when drift dominates.
How should I design the power supply for AD510JH/+?
Design the AD510JH/+ supply around its bipolar input architecture and the output voltage required by the feedback network. The specified operating temperature range is 0 C to +70 C, and the device draws approximately 4 mA in the characterized operating condition. Verify minimum supply headroom, maximum output swing, and input common-mode range in the manufacturer characteristic curves before selecting capacitors and regulators.
Where can I buy AD510JH/+ online?
AD510JH/+ availability can be requested through the Request a Quote form on this page. The form is the appropriate route for confirming current stock, exact suffix acceptance, quantity breaks, and shipment timing for this legacy precision amplifier. Provide the target MPN and the required package suffix when submitting the request so the supply chain can quote the correct ordering configuration.
What is the price of AD510JH/+?
Current commercial terms for AD510JH/+ should be obtained through the Request a Quote form on this page. The form supports confirmation of unit pricing, volume tiers, currency, and shipment availability for the exact ordering code. Because this is an older TO-99-8 precision amplifier, request a fresh quotation rather than relying on historical catalog pricing when preparing a production BOM.
What is the lead time for AD510JH/?
The current lead time for AD510JH/+ depends on the availability of the exact package and ordering suffix. Submit the MPN through the Request a Quote form on this page to obtain a lead-time confirmation for the required quantity. Include any date-critical production schedule in the request, since legacy hermetically sealed analog devices can have materially different sourcing lead times from active mainstream amplifiers.
Is AD510JH/+ currently in stock?
Stock for AD510JH/+ changes by quantity and ordering configuration, so the Request a Quote form on this page is the direct way to confirm availability. Include the required quantity, target date, and permitted alternate-suffix policy in the request. The 0 C to +70 C commercial-temperature grade should also be confirmed against the operating environment before accepting a shipment.
What are the main design pitfalls when using AD510JH/+?
The main pitfalls are assuming modern surface-mount compatibility, neglecting supply headroom, and replacing the amplifier without checking bias-current error. The TO-99-8 footprint is a hermetically sealed metal can with a mechanical format unlike SOIC or DIP packages. Keep input and output return paths short, place supply-bypass capacitors near the device, and confirm input bias-current contributions from the source impedance.
How does the AD510JH/+ perform at elevated temperature?
The AD510JH/+ is specified for operation from 0 C to +70 C and exhibits an input offset temperature drift of 3 uV/C. That drift directly contributes to measurement error in low-level amplifier stages and should be included in the error budget for precision instrumentation. For wider temperature ranges, higher precision, or modern surface-mount assembly, evaluate a current active precision-amplifier family instead.

Data referensi kejuruteraan untuk AD510JH/+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose AD510JH/+ when maintaining a legacy precision-amplifier circuit whose original design depends on a TO-99-8 bipolar device with 100 uV maximum offset, 25 nA maximum bias current, and 94 dB open-loop gain. AD510JH is the closest documented ordering alternative and is the logical first option when the trailing /+ designation is not required. Evaluate OP-27CJ or MXL1001ACH only after reviewing complete electrical characteristics, pin mapping, stability, supply range, and load behavior. For new high-volume designs, compare the legacy device against an active surface-mount precision amplifier rather than assuming a drop-in substitution. The primary trade-off is preserving the original system architecture versus gaining newer packaging, broader temperature options, and simplified assembly.

Perbandingan dengan Gantian

Parametr Produk Ini AD510JH OP-27CJ MXL1001ACH
Package TO-99-8 TO-99-8 TO-99-8 TO-99-8
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated

Penyeberangsung Jelas

  • Closest documented ordering alternative (vsAD510JH)
  • Higher documented open-loop gain than generic comparison candidates (vsOP-27CJ)
  • Defined noise and thermal-drift values for precision error budgeting (vsMXL1001ACH)

Catatan Desain

Design the supply rails so the AD510JH/+ retains adequate input common-mode range and output-swing margin at every operating point. The device has a bipolar input architecture and is characterized at approximately 4 mA supply current. Place supply-bypass capacitors close to the device leads and use separate return paths for input and output to reduce supply-induced offset and noise pickup.

Do not treat the TO-99-8 metal-can package as interchangeable with an SOIC or DIP footprint solely because both are eight-pin devices. Check lead spacing, body diameter, pin numbering, and the manufacturer pin-description table. The AD510JH ordering form is the closest documented match, while OP-27CJ and MXL1001ACH still require verification of pin mapping, bias current, compensation, and supply behavior.

For high-impedance sensor inputs, calculate the bias-current contribution using the source impedance and compare it with the AD510JH/+ specification of 25 nA maximum input bias current. Keep sensitive input traces short, guard high-impedance nodes where practical, and use matched feedback resistors. Include the specified 3 uV/C offset drift and 100 uV maximum offset in the total measurement-error budget.

Route the inverting and non-inverting connections away from supply pins and high-current output paths. Use a compact ground reference beneath the analog section and connect bypass-capacitor returns directly to the device ground pins. Since this is a leaded hermetically sealed package, also account for insertion stress and provide adequate clearance from tall adjacent components during legacy-board assembly and maintenance.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The TO-99-8 hermetically sealed package predates current surface-mount lead-free practices. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were identified, so these fields remain unknown.

Pencarian Berhubungan

AD510JH/+ datasheet AD510JH/+ pinout AD510JH datasheet PDF AD510JH TO-99-8 amplifier AD510JH replacement AD510JH drop-in substitute AD510JH vs OP-27CJ AD510JH vs MXL1001ACH AD510JH price and stock buy AD510JH/+ online AD510JH precision op amp AD510JH sensor amplifier Analog Devices AD510JH

Komponen dan Tanda berkaitan

Analog Devices AD510JH/+ AD510JH OP-27CJ MXL1001ACH Maxim Integrated operational amplifier precision amplifier bipolar input architecture voltage-feedback amplifier slew rate input offset voltage input bias current open-loop gain input voltage noise density input offset temperature drift internal compensation TO-99-8 metal-can package hermetic package lead-mounted component sensor signal conditioning strain-gauge bridge process control laboratory instrumentation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ