Analog Devices

AD7450BRM - 12-Bit ADC for Signal Acquisition | Analog Devices

MPN: AD7450BRM ✓ Aktif
833 kSPS Vdss 8-MSOP Package
MOQ: 1 |

AD7450BRM Ringkasan

The Analog Devices AD7450BRM is a 12-bit successive-approximation analog-to-digital converter with a fully differential analog input, up to 1 MSPS throughput at a 5 V supply, and an 8-MSOP package. It operates from a single 3 V or 5 V power supply, while its external reference voltage can vary from 100 mV to 3.5 V depending on the supply voltage and application requirements. The converter is designed for compact, high-speed signal-acquisition systems requiring differential sampling and a serial digital interface.

A successive-approximation ADC, or SAR ADC, is a sampling data-converter architecture that successively resolves the analog input into binary codes. Within the data-converter hierarchy, the AD7450BRM is a 12-bit SAR ADC with a differential track-and-hold input stage. This architecture is useful when a design needs predictable conversion behavior, compact implementation, and direct digital-code output without the complexity of a higher-resolution pipeline converter.

The AD7450 family operates from either a 3 V or 5 V supply. According to the Analog Devices product page, the maximum throughput is 833 kSPS with a 3 V supply and 1 MSPS with a 5 V supply. Its 12-bit resolution provides 4096 digital codes, and the fully differential input architecture helps reject common-mode disturbances when appropriately driven. An externally applied reference voltage of 100 mV to 3.5 V provides additional flexibility for matching the converter to the input range of the target circuit.

The AD7450BRM includes a low-noise, wide-bandwidth differential track-and-hold amplifier. That front end acquires the differential input before conversion, allowing the SAR core to represent the sampled voltage with 12-bit resolution. The digital output is provided through a serial interface suitable for connection to a controller, FPGA, or other data-acquisition logic. Circuit design should preserve a clean differential signal path from the source through the converter pins.

Typical applications include industrial process measurement, instrumentation, sensor-interface digitizers, communication receivers, and compact data-acquisition modules. The differential input is particularly useful when the source is balanced or when a single-ended signal must be converted into a differential pair through a suitable driver. External reference and input networks must also be selected to match the chosen input range and conversion speed.

For reliable implementation, use the pin-description table and application information in the manufacturer datasheet when assigning PCB tracks. Place input, reference, and decoupling connections to minimize disturbance of the differential analog path. Verify the selected reference voltage, supply level, clocking method, and digital interface timing before releasing the PCB layout.

This page combines manufacturer specifications, package details, sourcing guidance, drop-in replacement analysis, comparison information, and practical layout considerations to support faster component selection and PCB implementation.

Pilihan pengganti yang segera untuk AD7450BRM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

AD7450BRMZ

✅ Masuk Drop-In
📦 8-MSOP
Same 12-bit SAR architecture, differential input, 3 V or 5 V supply class, and 833 kSPS or 1 MSPS throughput class; ordering suffix differs by 0% in listed core electrical parameters.

📋 Alternatif rujukan (tidak dalam katalog)

AD7450BRM Penilaian maksimum & Ciri-ciri Elektrik

Pemecahkatan 12 bit
Architecture Successive-approximation SAR ADC
Input Configuration Fully differential, 1 channel
Throughput at 3 V Supply 833 kSPS
Throughput at 5 V Supply 1 MSPS
Tegangan Pemberi Arus 3 V or 5 V
External Reference Voltage 100 mV to 3.5 V
Output Resolution Codes 4096 codes
Input Front End Low-noise, wide-bandwidth differential track-and-hold amplifier
Kemasan 8-MSOP
Kiraan Pin 8 pins
Temperature Grade Industrial
Jenis Pemasangan Surface mount
Digital Interface Serial interface

Panduan Konfigurasi Pin AD7450BRM 8-msop

Konfigurasi pin untuk AD7450BRM (8-msop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-msop untuk AD7450BRM

Tiada data garisan pin yang diperoleh untuk AD7450BRM.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD7450BRM patut untuk 6 aplikasis: Industrial Process Measurement, Precision Sensor Interface, Communication Receiver, Data Acquisition Module, Test and Measurement Instrument, Balanced Audio Signal Capture.

🏭

Industrial Process Measurement

The AD7450BRM suits compact process-measurement modules that digitize differential sensor outputs at up to 833 kSPS from 3 V or 5 V. Its fully differential input can accept a balanced signal when the sensor and signal-conditioning stages maintain correct common-mode levels. The 12-bit resolution provides 4096 digital codes, while the low-noise, wide-bandwidth track-and-hold amplifier supports acquisition of changing process variables. Place the converter near the sensor interface, keep the differential traces short and matched, and use the manufacturer reference circuit for input, reference, and decoupling connections.

🧩

Precision Sensor Interface

The AD7450BRM can digitize low-level differential sensor signals when the system requires 12-bit resolution without the size and power burden of a higher-resolution converter. Its differential track-and-hold input is designed for balanced excitation and sensing arrangements, while the external reference can be adjusted from 100 mV to 3.5 V to fit the available signal range. At a 5 V supply, the converter can operate at up to 1 MSPS. Verify input bandwidth, settling behavior, and reference noise against the sensor response before setting the channel bandwidth.

🌐

Communication Receiver

The AD7450BRM is suitable for communication receiver modules that require a compact differential sampling stage with a serial output to a digital controller. A fully differential input helps preserve signal integrity when the source is balanced, and the converter's 1 MSPS maximum throughput at 5 V provides sufficient conversion rate for many moderate-bandwidth receive paths. The design must maintain the specified common-mode range and input amplitude at the converter pins. Keep clock and serial-data routing away from the analog input and reference traces to minimize switching coupling.

🖥️

Data Acquisition Module

The AD7450BRM fits a compact standalone data-acquisition module requiring one differential channel, 12-bit output, and flexible supply options. Operation from 3 V or 5 V allows the module to support different installed-system rails, while throughput reaches 833 kSPS at 3 V and 1 MSPS at 5 V. The 8-MSOP package supports compact board placement, although careful decoupling and grounded return paths remain essential. Use the manufacturer application circuit to establish the input network, reference implementation, clock arrangement, and serial-interface timing.

📺

Test and Measurement Instrument

The AD7450BRM can serve as the sampling ADC in a measurement instrument that captures a differential analog waveform and transfers the resulting codes through a serial interface. Its 12-bit resolution and differential input are useful for reducing common-mode pickup in test fixtures, while the selectable 3 V or 5 V operating mode supports different instrument architectures. The external reference range of 100 mV to 3.5 V enables channel scaling when the source signal is small. Account for acquisition timing, input settling, and digital-interface latency when defining the instrument's measurement bandwidth.

🎧

Balanced Audio Signal Capture

The AD7450BRM can capture balanced audio-frequency signals in equipment requiring a differential ADC front end. Its 12-bit resolution yields 4096 output codes, and the fully differential track-and-hold input can reduce sensitivity to common-mode noise when the preceding converter is correctly balanced. The device can be clocked at up to 833 kSPS with a 3 V supply or 1 MSPS with a 5 V supply, depending on the application requirements. Use a low-noise external reference and controlled input attenuation, and follow the manufacturer's layout guidance to prevent digital activity from disturbing the audio path.

Ringkasan Produk Disebarkan

AD7450BRMZ Same AD7450 converter in an alternate ordering suffix Dipergunakan di: Industrial Process Measurement, Communication Receiver, Data Acquisition Module, Test and Measurement Instrument AD7450BRM Analog Devices Dipergunakan di: Precision Sensor Interface, Balanced Audio Signal Capture
What is the AD7450BRM?
The AD7450BRM is a 12-bit, single-channel SAR analog-to-digital converter with a fully differential input. According to the Analog Devices product page, it operates from a single 3 V or 5 V supply and reaches throughput rates of up to 833 kSPS or 1 MSPS, respectively. It is packaged in an 8-MSOP and is intended for compact, high-speed signal-acquisition circuits.
What is the conversion speed of the AD7450BRM?
The AD7450BRM converts at up to 833 kSPS when powered from 3 V and up to 1 MSPS when powered from 5 V. These rates are published on the Analog Devices product page for the AD7450 family. The selected clock, reference voltage, analog input arrangement, and digital interface timing should follow the manufacturer datasheet to preserve rated conversion performance.
What resolution and input type does the AD7450BRM provide?
The AD7450BRM provides 12-bit resolution and a fully differential, single-channel analog input. Twelve-bit resolution corresponds to 4096 possible digital codes. According to the Analog Devices product page, the differential track-and-hold front end is designed to acquire the input signal before the successive-approximation conversion takes place.
Where can I download the AD7450BRM datasheet PDF?
The official AD7450BRM documentation is available from the Analog Devices product page at https://www.analog.com/en/products/ad7450.html. Select the datasheet and application-information links on that page for the complete electrical characteristics, pin descriptions, register details, timing information, and reference circuit. The manufacturer documentation should be the controlling source for PCB implementation.
Where can I find the AD7450BRM pinout?
Use the pin-description table and package drawing in the AD7450 manufacturer datasheet to locate every AD7450BRM connection. The AD7450BRM is identified in distributor listings as an 8-MSOP device, but signal, power, reference, clock, and serial-interface assignments must be assigned from the official pin table rather than inferred from the package outline. Keep the exposed analog and digital paths consistent with the reference schematic.
Can the AD7450BRM operate from a 3 V supply?
Yes, the AD7450BRM can operate from a single 3 V supply. According to the Analog Devices product page, its maximum throughput is 833 kSPS at 3 V, compared with 1 MSPS at 5 V. The external reference voltage may range from 100 mV to 3.5 V, but the usable input and reference combination must remain consistent with the device's operating conditions.
What reference voltage should I use with the AD7450BRM?
The AD7450BRM accepts an externally applied reference voltage that can vary from 100 mV to 3.5 V, depending on the power supply and application. According to the Analog Devices product page, the external reference makes it possible to match the converter's input range to the source circuit. Select the final value using the manufacturer's input-range and reference specifications.
Is the AD7450BRM suitable for differential sensor signals?
Yes, the AD7450BRM is designed around a fully differential analog input and a differential track-and-hold amplifier. This arrangement is suitable for balanced sensor outputs and for single-ended sources converted into a differential pair by suitable driver circuitry. Use matched routing, adequate input drive, and the reference application circuit to maintain signal integrity and common-mode performance.
AD7450BRM vs AD7450BRMZ - which package option should I use?
AD7450BRM and AD7450BRMZ refer to ordering and packaging options associated with the same AD7450 converter family and 8-MSOP footprint. The meaningful engineering comparison is therefore the manufacturer-specified electrical configuration rather than a change in conversion architecture. Confirm the exact tape-and-reel or tube ordering code and inspect the official package drawing before procurement or PCB assembly.
When should I choose the AD7450BRM over another 12-bit SAR ADC?
Choose the AD7450BRM when the design needs a 12-bit SAR ADC, a fully differential input, operation from 3 V or 5 V, and throughput up to 1 MSPS in an 8-MSOP package. Its external reference range of 100 mV to 3.5 V also provides useful scaling flexibility. Compare the required input bandwidth, reference architecture, clocking requirements, and package pinout before final selection.
What is the best drop-in replacement for the AD7450BRM?
The closest documented drop-in option is AD7450BRMZ because it represents the AD7450 family in the same 8-MSOP configuration. It retains the 12-bit SAR architecture, fully differential input, 3 V or 5 V operation, and 833 kSPS or 1 MSPS throughput class described for the AD7450 family. Verify the exact suffix, pin assignments, temperature grade, and ordering format before substitution.
What can replace the AD7450BRM?
AD7450BRMZ is the most direct documented replacement candidate because it uses the same AD7450 family and 8-MSOP configuration. No independently verified cross-brand, pin-to-pin equivalent was identified with enough electrical detail to claim drop-in compatibility. For a new design, evaluate other 12-bit differential SAR ADCs against the required resolution, throughput, reference range, clock interface, and exact pinout.
Is the AD7450BRM the same as AD7450BRMZ?
AD7450BRM and AD7450BRMZ are ordering variants of the AD7450 12-bit differential SAR ADC family in the 8-MSOP package. Their core conversion characteristics are the same family-level specifications: 3 V or 5 V operation, 833 kSPS or 1 MSPS throughput, and an external reference range of 100 mV to 3.5 V. The suffix should still be checked against the required shipping format and grade.
Where can I buy the AD7450BRM and what is its price?
Use the Request a Quote form on this page to ask for AD7450BRM availability, current unit pricing, lot quantities, and lead time. The form provides a direct commercial channel without relying on stale prices or naming other sellers. Include the required package orientation, industrial temperature grade, quantity, and target delivery date in the request.
Is the AD7450BRM in stock and what is its lead time?
Current stock and lead time for the AD7450BRM should be confirmed through the Request a Quote form on this page. Include the required quantity, acceptable packaging orientation, date code requirements, and destination country so the commercial response can reflect the actual order configuration. For production planning, request a replenishment estimate as well as the initial allocation.

Data referensi kejuruteraan untuk AD7450BRM — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD7450BRM when a compact, single-channel data-acquisition circuit needs 12-bit resolution, a fully differential SAR input, and operation from 3 V or 5 V. Its 833 kSPS rate at 3 V and 1 MSPS rate at 5 V make it appropriate for moderate-bandwidth measurement, sensor, communication, and balanced-signal applications. AD7450BRMZ is the closest documented drop-in alternative because it retains the same AD7450 family, 8-MSOP package, 12-bit architecture, differential input, and conversion-rate class; choose it when its ordering and shipping format better match production requirements. Other 12-bit SAR converters should be considered only after checking exact pin compatibility, reference range, input bandwidth, clock interface, acquisition timing, temperature grade, and lifecycle requirements. Because no cross-brand part was verified as fully pin-to-pin compatible with the documented AD7450BRM configuration, use a competitive device only after a complete electrical and footprint review.

Perbandingan dengan Gantian

Parametr Produk Ini AD7450BRMZ
Package 8-MSOP 8-MSOP
Brand Analog Devices Analog Devices
Resolution 12 bit 12 bit
Architecture Successive-approximation SAR ADC Successive-approximation SAR ADC
Input Configuration Fully differential, 1 channel Fully differential, 1 channel
Throughput at 3 V Supply 833 kSPS 833 kSPS
Throughput at 5 V Supply 1 MSPS 1 MSPS
Supply Voltage 3 V or 5 V 3 V or 5 V
External Reference Voltage 100 mV to 3.5 V 100 mV to 3.5 V
Input Front End Low-noise, wide-bandwidth differential track-and-hold amplifier Low-noise, wide-bandwidth differential track-and-hold amplifier

Penyeberangsung Jelas

  • Differential input supports balanced acquisition (vsAD7450BRMZ)
  • Dual 3 V and 5 V operating options (vsAD7450BRMZ)
  • External reference supports flexible input scaling (vsAD7450BRMZ)

Catatan Desain

Route the differential analog input as a short, symmetric pair and place the input-network components close to the corresponding converter pins. Keep the external reference and decoupling connections compact, and provide a clear return path beneath the analog section. The manufacturer application circuit is the appropriate starting point for component values and placement because the track-and-hold input, reference network, and supply pins interact closely.

Separate the analog input and reference routes from clock, serial-data, and serial-clock traces. If the interface crosses analog and digital regions, route it perpendicular to the sensitive analog path and maintain a continuous ground reference. Differential traces should have similar geometry and symmetric termination so that conversion timing is not degraded by unequal propagation delay.

Use a quiet 3 V or 5 V supply and place local decoupling at the converter's supply and ground pins as specified in the manufacturer datasheet. Because the conversion reference is externally applied, its noise and transient response directly affect conversion accuracy. Avoid routing reference current through digital return paths and choose reference components and routing that meet the required noise and settling behavior.

Do not infer the input range solely from the converter resolution. The external reference, supply voltage, common-mode range, driver amplitude, and selected operating mode jointly determine usable full-scale input. Implement the manufacturer's clock and acquisition sequence, observe required settling intervals, and use the official pin table to assign power, ground, analog, reference, clock, and serial-interface pins.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The industrial-temperature designation does not by itself establish AEC-Q100 qualification. Confirm environmental and material-compliance statements using the manufacturer's current product documentation and declaration.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD7450BRM datasheet AD7450BRM datasheet pdf AD7450BRM pinout AD7450BRM specifications AD7450BRM equivalent AD7450BRM replacement AD7450BRM vs AD7450BRMZ Analog Devices AD7450BRM AD7450BRM 12 bit ADC AD7450BRM 1 MSPS AD7450BRM 8-MSOP AD7450BRM application circuit AD7450BRM price AD7450BRM stock AD7450BRM signal acquisition

Komponen dan Tanda berkaitan

Analog Devices AD7450BRM AD7450BRMZ AD7450 12-bit SAR ADC successive-approximation converter analog-to-digital converter fully differential input differential track-and-hold amplifier single-channel ADC 833 kSPS 1 MSPS 3 V supply 5 V supply external reference voltage 100 mV to 3.5 V reference 8-MSOP MSOP package surface-mount package serial digital interface signal acquisition industrial process measurement balanced sensor interface 4096 digital codes low-noise ADC
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ