AD7450BRM - 12-Bit ADC for Signal Acquisition | Analog Devices
料号: AD7450BRM ✓ 量产中AD7450BRM 概述
A successive-approximation ADC, or SAR ADC, is a sampling data-converter architecture that successively resolves the analog input into binary codes. Within the data-converter hierarchy, the AD7450BRM is a 12-bit SAR ADC with a differential track-and-hold input stage. This architecture is useful when a design needs predictable conversion behavior, compact implementation, and direct digital-code output without the complexity of a higher-resolution pipeline converter.
The AD7450 family operates from either a 3 V or 5 V supply. According to the Analog Devices product page, the maximum throughput is 833 kSPS with a 3 V supply and 1 MSPS with a 5 V supply. Its 12-bit resolution provides 4096 digital codes, and the fully differential input architecture helps reject common-mode disturbances when appropriately driven. An externally applied reference voltage of 100 mV to 3.5 V provides additional flexibility for matching the converter to the input range of the target circuit.
The AD7450BRM includes a low-noise, wide-bandwidth differential track-and-hold amplifier. That front end acquires the differential input before conversion, allowing the SAR core to represent the sampled voltage with 12-bit resolution. The digital output is provided through a serial interface suitable for connection to a controller, FPGA, or other data-acquisition logic. Circuit design should preserve a clean differential signal path from the source through the converter pins.
Typical applications include industrial process measurement, instrumentation, sensor-interface digitizers, communication receivers, and compact data-acquisition modules. The differential input is particularly useful when the source is balanced or when a single-ended signal must be converted into a differential pair through a suitable driver. External reference and input networks must also be selected to match the chosen input range and conversion speed.
For reliable implementation, use the pin-description table and application information in the manufacturer datasheet when assigning PCB tracks. Place input, reference, and decoupling connections to minimize disturbance of the differential analog path. Verify the selected reference voltage, supply level, clocking method, and digital interface timing before releasing the PCB layout.
This page combines manufacturer specifications, package details, sourcing guidance, drop-in replacement analysis, comparison information, and practical layout considerations to support faster component selection and PCB implementation.
直接替换替代料: AD7450BRM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD7450BRMZ
✅ 直接替换📋 参考替代料(不在目录中)
AD7450BRM 最大额定值与电气特性
| 分辨率 | 12 bit |
| Architecture | Successive-approximation SAR ADC |
| Input Configuration | Fully differential, 1 channel |
| Throughput at 3 V Supply | 833 kSPS |
| Throughput at 5 V Supply | 1 MSPS |
| 电源电压 | 3 V or 5 V |
| External Reference Voltage | 100 mV to 3.5 V |
| Output Resolution Codes | 4096 codes |
| Input Front End | Low-noise, wide-bandwidth differential track-and-hold amplifier |
| 封装 | 8-MSOP |
| 引脚数量 | 8 pins |
| Temperature Grade | Industrial |
| 安装类型 | Surface mount |
| Digital Interface | Serial interface |
AD7450BRM 8-msop 引脚配置指南
AD7450BRM(8-msop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD7450BRM.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD7450BRM 适用于 6 应用s: Industrial Process Measurement, Precision Sensor Interface, Communication Receiver, Data Acquisition Module, Test and Measurement Instrument, Balanced Audio Signal Capture.
Industrial Process Measurement
The AD7450BRM suits compact process-measurement modules that digitize differential sensor outputs at up to 833 kSPS from 3 V or 5 V. Its fully differential input can accept a balanced signal when the sensor and signal-conditioning stages maintain correct common-mode levels. The 12-bit resolution provides 4096 digital codes, while the low-noise, wide-bandwidth track-and-hold amplifier supports acquisition of changing process variables. Place the converter near the sensor interface, keep the differential traces short and matched, and use the manufacturer reference circuit for input, reference, and decoupling connections.
推荐
Precision Sensor Interface
The AD7450BRM can digitize low-level differential sensor signals when the system requires 12-bit resolution without the size and power burden of a higher-resolution converter. Its differential track-and-hold input is designed for balanced excitation and sensing arrangements, while the external reference can be adjusted from 100 mV to 3.5 V to fit the available signal range. At a 5 V supply, the converter can operate at up to 1 MSPS. Verify input bandwidth, settling behavior, and reference noise against the sensor response before setting the channel bandwidth.
推荐
Communication Receiver
The AD7450BRM is suitable for communication receiver modules that require a compact differential sampling stage with a serial output to a digital controller. A fully differential input helps preserve signal integrity when the source is balanced, and the converter's 1 MSPS maximum throughput at 5 V provides sufficient conversion rate for many moderate-bandwidth receive paths. The design must maintain the specified common-mode range and input amplitude at the converter pins. Keep clock and serial-data routing away from the analog input and reference traces to minimize switching coupling.
推荐
Data Acquisition Module
The AD7450BRM fits a compact standalone data-acquisition module requiring one differential channel, 12-bit output, and flexible supply options. Operation from 3 V or 5 V allows the module to support different installed-system rails, while throughput reaches 833 kSPS at 3 V and 1 MSPS at 5 V. The 8-MSOP package supports compact board placement, although careful decoupling and grounded return paths remain essential. Use the manufacturer application circuit to establish the input network, reference implementation, clock arrangement, and serial-interface timing.
推荐
Test and Measurement Instrument
The AD7450BRM can serve as the sampling ADC in a measurement instrument that captures a differential analog waveform and transfers the resulting codes through a serial interface. Its 12-bit resolution and differential input are useful for reducing common-mode pickup in test fixtures, while the selectable 3 V or 5 V operating mode supports different instrument architectures. The external reference range of 100 mV to 3.5 V enables channel scaling when the source signal is small. Account for acquisition timing, input settling, and digital-interface latency when defining the instrument's measurement bandwidth.
推荐
Balanced Audio Signal Capture
The AD7450BRM can capture balanced audio-frequency signals in equipment requiring a differential ADC front end. Its 12-bit resolution yields 4096 output codes, and the fully differential track-and-hold input can reduce sensitivity to common-mode noise when the preceding converter is correctly balanced. The device can be clocked at up to 833 kSPS with a 3 V supply or 1 MSPS with a 5 V supply, depending on the application requirements. Use a low-noise external reference and controlled input attenuation, and follow the manufacturer's layout guidance to prevent digital activity from disturbing the audio path.
推荐
推荐产品汇总
工程参考数据: AD7450BRM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD7450BRMZ |
|---|---|---|
| Package | 8-MSOP | 8-MSOP |
| Brand | Analog Devices | Analog Devices |
| Resolution | 12 bit | 12 bit |
| Architecture | Successive-approximation SAR ADC | Successive-approximation SAR ADC |
| Input Configuration | Fully differential, 1 channel | Fully differential, 1 channel |
| Throughput at 3 V Supply | 833 kSPS | 833 kSPS |
| Throughput at 5 V Supply | 1 MSPS | 1 MSPS |
| Supply Voltage | 3 V or 5 V | 3 V or 5 V |
| External Reference Voltage | 100 mV to 3.5 V | 100 mV to 3.5 V |
| Input Front End | Low-noise, wide-bandwidth differential track-and-hold amplifier | Low-noise, wide-bandwidth differential track-and-hold amplifier |
关键差异点
- Differential input supports balanced acquisition (对比 AD7450BRMZ)
- Dual 3 V and 5 V operating options (对比 AD7450BRMZ)
- External reference supports flexible input scaling (对比 AD7450BRMZ)
设计说明
Route the differential analog input as a short, symmetric pair and place the input-network components close to the corresponding converter pins. Keep the external reference and decoupling connections compact, and provide a clear return path beneath the analog section. The manufacturer application circuit is the appropriate starting point for component values and placement because the track-and-hold input, reference network, and supply pins interact closely.
Separate the analog input and reference routes from clock, serial-data, and serial-clock traces. If the interface crosses analog and digital regions, route it perpendicular to the sensitive analog path and maintain a continuous ground reference. Differential traces should have similar geometry and symmetric termination so that conversion timing is not degraded by unequal propagation delay.
Use a quiet 3 V or 5 V supply and place local decoupling at the converter's supply and ground pins as specified in the manufacturer datasheet. Because the conversion reference is externally applied, its noise and transient response directly affect conversion accuracy. Avoid routing reference current through digital return paths and choose reference components and routing that meet the required noise and settling behavior.
Do not infer the input range solely from the converter resolution. The external reference, supply voltage, common-mode range, driver amplitude, and selected operating mode jointly determine usable full-scale input. Implement the manufacturer's clock and acquisition sequence, observe required settling intervals, and use the official pin table to assign power, ground, analog, reference, clock, and serial-interface pins.
合规信息
The industrial-temperature designation does not by itself establish AEC-Q100 qualification. Confirm environmental and material-compliance statements using the manufacturer's current product documentation and declaration.