Analog Devices

ADM232AARW - 200 kB/s Dual RS-232 Transceiver | Analog Devices

MPN: ADM232AARW ✗ Akhir Hayat
4.5 V to 5.5 V Vdss 16-lead SOIC, surface mount Package
MOQ: 1 |

ADM232AARW Ringkasan

Analog Devices ADM232AARW is a 200 kB/s RS-232 interface transceiver integrating two drivers and two receivers for full-duplex serial communication. It operates from a single 5 V supply, uses four 0.1 µF charge-pump capacitors, and is packaged in a surface-mount 16-lead SOIC. The device also includes onboard DC-DC converter circuitry and provides approximately 9 V of transmitter output swing.

An RS-232 transceiver is the interface bridge between a low-voltage digital controller and a physical serial port. The driver converts logic-level signals into RS-232-compatible levels, while the receiver converts bipolar RS-232 signals back into CMOS-compatible logic. As a member of the interface-IC hierarchy, the ADM232AARW belongs to the RS-232 transceiver class, where full-duplex operation, voltage levels, signaling rate, and supply voltage determine its system suitability.

Key features include a 200 kB/s transmission rate, two drivers, two receivers, and receiver input protection to 30 V. The single 5 V supply allows operation from 4.5 V to 5.5 V, eliminating the need for a separate negative rail. The charge-pump network generates the positive and negative voltage levels required by RS-232, while the integrated DC-DC converter supports the on-board receive path. Its industrial temperature range extends from -40°C to +85°C.

The ADM232AARW uses CMOS-compatible driver inputs and receiver outputs, making it suitable for UARTs, microcontrollers, modems, and industrial controllers with conventional 5 V or 3.3 V-compatible interface levels. Its 200 kB/s rate exceeds the throughput of many legacy serial links while retaining the familiar RS-232 electrical interface. The 16-SOIC package also supports automated board assembly and occupies substantially less board area than discrete driver and receiver implementations.

Typical applications include industrial instrumentation, point-of-sale equipment, data acquisition systems, test equipment, and embedded control systems that exchange serial commands over an RS-232 port. It can also support legacy peripherals through short cables, although modern designs must consider ground continuity, protection, and the practical distance limitations of RS-232.

Designers should place the four 0.1 µF charge-pump capacitors close to their assigned pins and route the serial outputs and inputs away from noisy switching circuitry. Input protection to 30 V improves tolerance to accidental voltage excursions, but it does not replace surge protection for cables exposed to industrial transients.

This page combines the ADM232AARW's interface characteristics, verified drop-in references, package-level guidance, and practical comparison criteria to help engineers evaluate board compatibility and select the appropriate RS-232 transceiver.

Pilihan pengganti yang segera untuk ADM232AARW — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADM232AARW (sama faktor bentuk dan kaki) — berbeza dalam Package, Supply Voltage, Maximum Data Rate, Product Type, Mounting Type.

Analog Devices
Package: 16-lead SOIC
Supply Voltage: 5 V
Maximum Data Rate: 120 kB/s
Bandingkan Dengan ADM232AARW →
Analog Devices
Package: 16-lead SOIC, wide body
Supply Voltage: 5 V
Product Type: Dual RS-232 line driver/receiver transceiver
Bandingkan Dengan ADM232AARW →
Analog Devices
Package: 16-lead SOIC (SOIC-16)
Supply Voltage: 5 V (single supply)
Mounting Type: Surface Mount
Bandingkan Dengan ADM232AARW →
Texas Instruments
Package: 18-pin PDIP, 0.300 inch pitch
Supply Voltage: 4.5 V to 5.5 V
Maximum Data Rate: 200 kbit/s
Bandingkan Dengan ADM232AARW →
Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Supply Voltage: 4.5 V to 5.5 V
Mounting Type: Surface Mount
Bandingkan Dengan ADM232AARW →

MAX222CN

✅ Masuk Drop-In
Texas Instruments
📦 16-lead SOIC
Dual RS-232 line driver/receiver · 4.5 V to 5.5 V · 5 V · 2 · 2 · Full · RS-232 · 200 kbit/s

Hubungi untuk harga

Lihat Datasheet →

MAX232ACSE+T

✅ Masuk Drop-In
Analog Devices
📦 16-lead SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Hubungi untuk harga

Lihat Datasheet →

MAX242

✅ Masuk Drop-In
📦 16-lead SOIC
Same 5 V pin-compatible RS-232 footprint, with additional shutdown functionality; the supply-voltage difference is 0 V.

📋 Alternatif rujukan (tidak dalam katalog)

ST232CWR

✅ Masuk Drop-In
📦 16-lead SOIC
Single-supply 5 V RS-232 alternative in a 16-lead SOIC package; supply-voltage difference is 0 V, with functional control and power details requiring final pin-level review.

📋 Alternatif rujukan (tidak dalam katalog)

ST232ABDR

✅ Masuk Drop-In
📦 16-lead SOIC
Two-driver, two-receiver 5 V RS-232 interface using four 0.1 µF capacitors; supply-voltage and external-capacitance differences are both 0.

📋 Alternatif rujukan (tidak dalam katalog)

ADM232AARW Spesifikasi

Product Type RS-232 line driver and receiver transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Maximum Data Rate 200 kB/s
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Charge-Pump Capacitance 0.1 µF
Number of External Charge-Pump Capacitors 4
Transmitter Output Swing 9 V
Receiver Input Voltage Rating 30 V
Receiver Hysteresis 400 mV
Onboard DC-DC Converter Yes
Gambaran Suhu Operasi -40°C to +85°C
Kemasan 16-lead SOIC, surface mount
Interface Standard EIA-232-E and V.28

Panduan Konfigurasi Pin ADM232AARW 16-lead soic, surface mount

Konfigurasi pin untuk ADM232AARW (16-lead soic, surface mount pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-lead soic, surface mount untuk ADM232AARW

Tiada data garisan pin yang diperoleh untuk ADM232AARW.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADM232AARW patut untuk 6 aplikasis: Industrial Instrumentation, Data Acquisition Systems, Test and Measurement Equipment, Point-of-Sale Terminals, Embedded Control and Modem Interfaces, Legacy Peripheral Connectivity.

🏭

Industrial Instrumentation

The ADM232AARW fits industrial instruments that exchange commands and measurements through a legacy RS-232 port. Its two-driver, two-receiver arrangement supports full-duplex communication, while the 4.5 V to 5.5 V operating range accommodates conventional 5 V industrial control systems. The 200 kB/s rate provides useful throughput for configuration uploads and real-time status data. Use the four specified 0.1 µF capacitors and keep the serial traces away from switching nodes. For field-wired ports, add suitable external protection because the 30 V receiver rating improves tolerance but does not replace a complete surge-protection strategy.

🖥️

Data Acquisition Systems

The ADM232AARW is useful in laboratory and industrial data-acquisition systems that must retain compatibility with RS-232 instruments. Two independent receive channels can collect status or trigger information, while two transmit channels support commands and acknowledgments. The single 5 V architecture simplifies board-level supply planning, and the 200 kB/s rate is suitable for moderate-rate telemetry. Place the interface near the connector, provide a low-impedance ground path, and separate the charge-pump capacitor area from precision analog circuitry to reduce potential coupling.

🔧

Test and Measurement Equipment

The ADM232AARW can provide the legacy PC-to-instrument interface in test systems whose front panel or rear panel uses an RS-232 connector. Its full-duplex channel count permits simultaneous command transmission and response reception, while the 200 kB/s rate handles remote programming and diagnostic data. The 16-lead SOIC package simplifies automated assembly and provides adequate temperature coverage for controlled equipment environments. Keep the connector-side protection close to the entry point and route the ground return alongside the cable shield where the system design supports it.

🖥️

Point-of-Sale Terminals

The ADM232AARW is applicable to point-of-sale and service terminals that communicate with legacy peripherals, printers, or controllers through RS-232. Its two transmit and two receive channels allow multiple device roles without duplicating the interface circuitry, while the 5 V supply supports integration with common embedded control platforms. The 200 kB/s rate is more than adequate for short command transactions. Keep the external capacitors close to the IC, provide a common signal ground, and place any connector protection ahead of the receiver inputs.

🌐

Embedded Control and Modem Interfaces

The ADM232AARW bridges a conventional UART or controller to an RS-232 network node, making it suitable for embedded controls, service equipment, and modem interfaces. Because it generates bipolar RS-232 levels from one 5 V supply, the design avoids a separate negative power rail. The integrated two-channel structure supports simultaneous request and status traffic, while the 200 kB/s rate covers moderate command streams. Observe the capacitor placement and supply-decoupling recommendations in the Analog Devices application guidance to preserve stable operation during repeated data transmission.

🔌

Legacy Peripheral Connectivity

The ADM232AARW is appropriate when an updated controller must connect to an older printer, scanner, instrument, or service interface that only supports RS-232. Two full-duplex channels can support simultaneous data transfer and status reporting, while the single 5 V supply simplifies retrofit boards. Its industrial temperature range supports controlled industrial environments, and the receiver input tolerance of 30 V offers additional margin against moderate voltage excursions. Verify cable length, grounding, and connector-level protection because protocol compatibility alone does not guarantee reliable communication over every RS-232 installation.

Ringkasan Produk Disebarkan

MC3487AP1 Multi-driver RS-232 interface companion for multi-channel equipment Dipergunakan di: Industrial Instrumentation, Point-of-Sale Terminals MC3486NSR Texas Instruments Dipergunakan di: Industrial Instrumentation, Embedded Control and Modem Interfaces, Legacy Peripheral Connectivity DS90C387VJD-TI Texas Instruments Dipergunakan di: Data Acquisition Systems MC3487DE4 Texas Instruments Dipergunakan di: Data Acquisition Systems, Embedded Control and Modem Interfaces TS4221ID Receiver interface companion for complementary serial signal handling Dipergunakan di: Test and Measurement Equipment TS4241ID Receiver interface companion for additional data channels Dipergunakan di: Test and Measurement Equipment MC3488AP1 onsemi Dipergunakan di: Point-of-Sale Terminals, Legacy Peripheral Connectivity
What is the ADM232AARW?
The ADM232AARW is a 200 kB/s, single-supply RS-232 transceiver with two drivers and two receivers in a 16-lead SOIC package. According to the Analog Devices datasheet, it operates from 4.5 V to 5.5 V and uses four external 0.1 µF capacitors to generate the bipolar RS-232 signaling levels. It is intended for full-duplex serial links in industrial, control, instrumentation, and legacy peripheral equipment.
What are the key specifications of ADM232AARW that engineers should know?
The ADM232AARW provides a 200 kB/s transmission rate, two transmit channels, two receive channels, and full-duplex operation from a single 5 V rail. Its operating range is 4.5 V to 5.5 V, with an industrial temperature range of -40°C to +85°C. The Analog Devices datasheet also specifies four 0.1 µF charge-pump capacitors, approximately 9 V output swing, and receiver input tolerance up to 30 V.
Where can I download the ADM232AARW datasheet PDF?
The ADM232AARW datasheet can be accessed through the official Analog Devices ADM232A product page linked on this page. The manufacturer document describes the general description, charge-pump circuit, electrical characteristics, receiver timing, driver timing, and application information. Use the pin-description table and the application schematic when assigning PCB tracks and selecting the four external 0.1 µF capacitors.
Where can I find the ADM232AARW pinout?
The ADM232AARW pinout is documented in the Analog Devices datasheet as a 16-lead SOIC arrangement containing the two receiver inputs and outputs, two transmitter inputs and outputs, supply pins, charge-pump capacitor pins, and no-connect positions. Use the manufacturer's pin-description table when laying out the PCB because the charge-pump capacitor connections and ground assignments must follow the documented package orientation.
Is ADM232AARW a full-duplex RS-232 transceiver?
Yes, the ADM232AARW is a full-duplex RS-232 transceiver containing two drivers and two receivers. Each channel can transmit or receive independently, allowing simultaneous bidirectional communication through the integrated interface channels. According to the Analog Devices datasheet, the device supports signaling rates up to 200 kB/s while generating the required positive and negative voltage levels from one 5 V supply.
What supply voltage does ADM232AARW require?
The ADM232AARW requires a single 5 V supply with an operating range of 4.5 V to 5.5 V. Its internal charge-pump circuitry generates the positive and negative voltages needed for RS-232 signaling, so the board does not need a separate negative supply. The Analog Devices datasheet identifies the 16-lead SOIC as the surface-mount package used by the ADM232AARW ordering code.
How fast is the ADM232AARW RS-232 interface?
The ADM232AARW supports transmission rates up to 200 kB/s. This makes it suitable for UART-based links that require more throughput than conventional low-speed RS-232 implementations. According to the Analog Devices datasheet, the interface includes two drivers, two receivers, onboard DC-DC conversion, and four external 0.1 µF charge-pump capacitors.
Does ADM232AARW need external negative-voltage supply components?
No, the ADM232AARW generates its bipolar RS-232 levels from a single 5 V supply. Four external 0.1 µF capacitors support the charge-pump and DC-DC functions identified in the Analog Devices datasheet. This reduces board complexity compared with discrete RS-232 implementations, although capacitor placement, supply bypassing, and protected cable connections still require careful PCB design.
What is the best drop-in replacement for ADM232AARW?
The ADM232AARW can be replaced in compatible 16-SOIC designs by pin-compatible devices such as MAX222, MAX232A, MAX242, ST232CWR, or ST232ABDR after confirming the exact pin arrangement and functional requirements. The MAX242 family adds shutdown functionality, while the ST options may differ in shutdown or power-control features. Verify the replacement datasheet rather than relying only on package and data-rate similarity.
Can MAX232A replace ADM232AARW without changing the PCB?
Yes, MAX232A is identified as pin-compatible with the ADM232AARW and can serve as a drop-in replacement in a compatible 16-lead SOIC footprint. Both devices provide the 2-driver, 2-receiver RS-232 function from a single 5 V supply. Confirm the manufacturer pin descriptions and charge-pump capacitor connections before production use, particularly if the original board includes optional shutdown or fail-safe behavior.
When should I choose ADM232AARW over MAX232A?
Choose ADM232AARW when an existing 16-SOIC board is standardized on the Analog Devices ADM232A family and no new sourcing is required. Choose MAX232A when procurement favors the Maxim lineage or an equivalent 5 V, 200 kB/s-class interface is preferred. Because the parts are reported as pin-compatible, the decision should also consider lifecycle status, qualification, documentation, and supply continuity.
Is ADM232AARW suitable for industrial instrumentation?
The ADM232AARW is suitable for industrial instrumentation because it combines a 4.5 V to 5.5 V supply range with an operating temperature range of -40°C to +85°C. It also provides two full-duplex channels and receiver input tolerance up to 30 V. Add appropriate cable-side surge and ESD protection when the RS-232 port connects to long or externally accessible wiring.
Where to buy ADM232AARW online?
Use the Request a Quote form on this page to request ADM232AARW availability, minimum order quantity, and current lead time. The part is identified as obsolete, so a request should include the required quantity, package code, and acceptable alternative plan. The XAIPART team can confirm current sourcing status without relying on a static price or inventory figure.
What is the price of ADM232AARW?
The current price for ADM232AARW depends on order quantity, sourcing condition, and packaging requirements. Submit a request through the Request a Quote form on this page with the required quantity and target package. The form allows buyers to obtain a current quotation and lead-time confirmation for this obsolete RS-232 transceiver.
Is ADM232AARW in stock and what is its lead time?
Stock and lead time for ADM232AARW should be confirmed through the Request a Quote form on this page because the component is listed as obsolete. Include the required order quantity and whether approved equivalent sourcing is acceptable. Requesting a quote provides current availability, minimum-order, and delivery information for the specific transaction.

Data referensi kejuruteraan untuk ADM232AARW — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADM232AARW when maintaining an existing board whose BOM is tied to the Analog Devices ADM232A family and whose 16-SOIC layout uses the documented charge-pump connections. It offers two drivers, two receivers, full-duplex operation, a 4.5 V to 5.5 V supply range, and 200 kB/s signaling from one 5 V rail. Choose MAX222 or MAX232A when a Maxim-family 16-SOIC equivalent improves procurement options and the exact pin functions have been checked. Choose MAX242 when the board can use its additional shutdown capability. Consider ST232CWR or ST232ABDR for STMicroelectronics sourcing, but review control pins, shutdown behavior, and charge-pump details. Because the target is obsolete, request current availability and lifecycle-supported alternatives before committing a production design.

Perbandingan dengan Gantian

Parametr Produk Ini MAX222 MAX232A MAX242 ST232CWR ST232ABDR
Brand Analog Devices Maxim Integrated Maxim Integrated Maxim Integrated STMicroelectronics STMicroelectronics
Package 16-lead SOIC 16-lead SOIC - same 16-lead SOIC - same 16-lead SOIC - same 16-lead SOIC - same 16-lead SOIC - same
RS-232 Channel Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Nominal Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Drop-In Reference Status Target device Reported as pin-compatible Reported as pin-compatible Reported as pin-compatible Same-package functional comparison Same-package functional comparison

Penyeberangsung Jelas

  • Established Analog Devices 2/2 RS-232 interface implementation (vsMAX232A)
  • Explicit pin-compatible cross-brand sourcing path (vsST232ABDR)
  • Single-supply charge-pump implementation (vsMAX242)

Catatan Desain

Place all four 0.1 µF charge-pump capacitors close to their assigned ADM232AARW pins, with short and symmetrical return paths. Keep the capacitor loops compact because long traces can increase circulating current and susceptibility to EMI. Place supply-decoupling capacitance near the 5 V and ground pins, and keep the connector-side protection network separate from the charge-pump area to minimize coupling into the receiver channels.

Route the RS-232 driver outputs directly toward the connector and avoid sharing their paths with clocks, switching-regulator nodes, or sensitive analog inputs. Maintain a nearby ground reference for the interface, and use a ground conductor that can carry the return current over the complete cable path. When the board connects to externally accessible equipment, place the protection elements close to the connector so surge energy is diverted before reaching the receiver inputs.

Do not treat a matching 16-SOIC package as proof of interchangeability. Before substituting MAX222, MAX232A, MAX242, ST232CWR, or ST232ABDR, compare every pin name, charge-pump capacitor connection, receiver-output behavior, shutdown implementation, and supply-current requirement. Also verify the board's logic levels and grounding arrangement; the ADM232AARW receiver input tolerance of 30 V is not a substitute for appropriately rated external surge protection.

RS-232 uses bipolar voltage levels, so cable routing and grounding affect performance even when the UART data rate is modest. Keep transmit and receive traces away from high-current switching paths, use a continuous ground reference, and avoid long unterminated branches. If long cables or noisy industrial environments are expected, add designed protection networks at the connector and validate command timing and error recovery with the intended peripheral rather than relying only on nominal 200 kB/s operation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page and component listings do not state a definitive compliance declaration for ADM232AARW. AEC-Q100 is not applicable because this is an industrial RS-232 interface IC rather than an automotive-qualified device.

Pencarian Berhubungan

ADM232AARW datasheet ADM232AARW pinout ADM232AARW datasheet pdf ADM232AARW equivalent ADM232AARW replacement ADM232AARW cross reference ADM232AARW price ADM232AARW stock ADM232AARW footprint Analog Devices ADM232AARW ADM232AARW vs MAX232A ADM232AARW 200 kB/s RS-232 ADM232AARW 5 V SOIC-16 ADM232AARW industrial instrumentation what is ADM232AARW

Komponen dan Tanda berkaitan

Analog Devices ADM232AARW ADM232A MAX222 MAX232A MAX242 ST232CWR ST232ABDR RS-232 transceiver RS-232 interface IC line driver line receiver full-duplex serial communication CMOS EIA-232-E V.28 charge-pump capacitors DC-DC converter 5 V power supply 200 kB/s data rate 16-lead SOIC SOIC package family surface-mount device industrial instrumentation data acquisition 30 V receiver input
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ